Question about 1992 Suzuki GSX 600 F (Katana)

1 Answer

Brake light problems

I have a 1994 Suzuki Katana GSX600 F the brake light does not work. When I apply either the handle or foot pedal the light fails to come on. Tested the fuses the result was nothing. Before that I replaced the bulb also. Would you might have a schemetics of the wiring of that particular problem? Would have a manual for this bike? Is it possible to e-mail me some information with drawings of that electrical wiring?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi and welcome to FixYa,

Almost always, your described problem indicates a loose or no ground connection of the brake light socket (most likely) or missing IGN + 12 (least likely). If the turn signals and/or the fuel gauge works, then the latter is unlikely as they share the same IGN+12 supply line. These might interest you:

  • a wiring diagram for the 89-95 GSX600F is available here;
  • a service manual for a GSX600F is here. Pls verify year compatibility.
Good luck and thank you for using FixYa.

Posted on Apr 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake lights do not come on


You may have a defective brake switch. The switch is located behind the brake foot pedal. When you apply pressure to the brake foot pedal, the switch should compress.

Aug 22, 2012 | Chevrolet Chevy Cars & Trucks

1 Answer

When i start my wind star in park and apply brake it wont shift out of park


Hi, first check your brake lights. If they are not working, the likely problem is the brake light switch above the brake pedal.
The shifter has a solenoid that locks the shifter until you put your foot on the brake. If the brake switch fails or the fuse burns out, the brake will not signal the shift solenoid to unlock the shifter. If the brake lights are working, the problem may be the shift solenoid itself. The solenoid is at the base of the shifter.
Please let me know if you have questions, and thanks for using FixYa.

Sep 15, 2011 | 1998 Ford Windstar

1 Answer

Brake pedal falls after stopping on 1995 suzuki sidekcik. replaced master cylinder and two rear wheel cylinders and bled system but issue still there. Brakes work fine but after you come to a complete...


I think u got problem on ur rear brake regulator, check that regulator that is located between the two rear brake lines.

The purpose of that barke pressure/limiter regulator is to control the hydraulic pressure on both rear brakes, bleed that and check if the and clean it.....

Dec 02, 2010 | 1995 Suzuki Sidekick

2 Answers

Both brake lights went out on our 2007 suzuki reno. What could be the problem? When I got in my car it would not come out of park. We had to hit the over ride and then dicovered both brake lights were...


your brake light switch above the pedal has failed or is stuck in. Look up at it to see if it is releasing the button when the brake is pressed. If yes, replace the switch. It only costs about $20, but may be a pain to get in and out. The switch looks like this:

2991099.jpg

Oct 22, 2010 | 2007 Suzuki Reno Hatchback

1 Answer

1994 DR650 Brake Lighting problems


Contact Suzuki directly to request a wiring diagram (not a schematic).

Sep 21, 2017 | 1994 Suzuki DR 650 RS-E

2 Answers

Did anyone know what wrong when every time you step on the brake the brake light come on and stay on until you turn off the car. so, I think the brake light is out but is not out. they all working. this...


You need to adjust the brake light switch (located in the pedal box (drivers foot well) ) The switch should only function after a reasonable amount of pedal travel and a slight adjustment will correct this . Good luck

Apr 16, 2010 | 1994 Toyota Camry

1 Answer

Hard to start need to adjust float


http://www.metal-fab.net/files/1988-1997-GSX600-750-1100F-R.pdf complete repair manual free download....if you need a step by step try www.katriders.com someone there will help you.

Apr 26, 2009 | 1994 Suzuki GSX 600 F (Katana)

Not finding what you are looking for?
1992 Suzuki GSX 600 F (Katana) Logo

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

78238 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4724 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...