Question about 2003 Harley Davidson FLSTC Heritage Classic

1 Answer

What is the torque settings for a head on a bmw 318is e36

And the sequence

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 88 Answers

BMW cylinder torque setting all models According to my service manual as follows. Cyl head to engine block (torx e12 M10 bolts) Stage 1 30nm (22 ft ? lb) Stage 2 + 90 degrees Stage 3 + 90 degrees Cyl head to lower timing chain cover 10nm (89in ? lb) The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Posted on Aug 09, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ownes manual for 1998 bmw 318i


BMW Owners manual. 1998 BMW 318i 4DR E36 BMW 318i CONV E36 BMW 318is 2DR E36 BMW 323i 4DR E36 BMW 323i CONV E36 BMW 323is 2DR E36 ... data.bmrparts.com/bmwparts/1610.html
have just checked this site out and the have a manual for yr bmw - hope this will help-

Feb 13, 2012 | Cars & Trucks

1 Answer

I need to replace the alternator belt in 1993 bmw 318 is


Here is a link to a thorough alternator replacement guide for BMWs.
http://www.pelicanparts.com/bmw/techarticles/101-Projects-89-Alternator/101-Projects-89-Alternator.htm
The model noted is an older 318is, (the E30 model), but since it is the exact same engine, the guide notes the changes with your model year BMW. Note that if you are ever looking for information for your BMW, generally info online is found under the internal model code. 1993-1999 BMWs are called E36, so in this guide make sure to follow what it says about the E36 models.

Mar 03, 2011 | BMW 318 Cars & Trucks

1 Answer

I have a k reg 318i 8v and i need to know the torque settings for the head bolts. Thankyou


Hi, I guess this is an E36. Head bolts should be renewed if heads been off, as they are stretch bolts. Tightened in 3 stages, 1st 30-35 nm 2nd + 90 degrees, 3rd + 90 degrees. Hope that helps

Oct 05, 2010 | 1997 BMW 318

2 Answers

I have a bmw e36 318is my steering isn't ease


power steer belt/tensioners always break, but could also be down on power steer fluid (leaking on driveway?)

Dec 19, 2009 | 1999 BMW 318 ti

1 Answer

318is with NO brakes


What about the brake lines? They could have a tiny hole somewhere letting air in (or just have air in them).

Aug 02, 2009 | 1996 BMW 318

1 Answer

Orginal clutch mark for bmw 318is e36, year 1993


Hi can you give us more detail regarding the original clutch mark. Are you trying to replace the clutch plate?

Jul 11, 2009 | 1996 BMW 318

1 Answer

How do i change the torque settings on my bmw e36 316i 1991 j reg its not a 318i but parts of a 318i would thay fit a 316i and work fine


Hi unsure what you mean by change the torque settings, if you mean on the head question is why? If yes for head, there is a tool for that & go to Download PDF search | PDFTown.com
for more info

Jul 08, 2009 | 1996 BMW 318

1 Answer

Clutch


The best clutch to buy would be one from BMW, but that would be expensive. So if you go with a pirate make sure it is a well known brand and that you get a garuntee.

Oct 13, 2008 | 1996 BMW 3 Series

3 Answers

Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36


BMW cylinder torque setting all models

According to my service manual as follows.

Cyl head to engine block (torx e12 M10 bolts)

Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees

Cyl head to lower timing chain cover 10nm (89in – lb)

The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Jun 16, 2008 | 1992 BMW 3 Series

1 Answer

1992 BMW Cylinder head


30nm 90 degrees, 90 degrees Renew bolts!!

Jun 16, 2008 | 1996 BMW 318

Not finding what you are looking for?
2003 Harley Davidson FLSTC Heritage Classic Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...