Question about kawasaki Motorcycles

1 Answer

Gpz 900 lights are not working ,horn not working,rev counter not working ,brake lights not working,but the indicators do work,starts ok and parking lights do work .the fan is not working does the fan have an earth of its own and could that effect all components not working on bike. where are the earths on there a hidden fuse i dont know about thats not in main fuse box. thanks guys for ur help .mike

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,799 Answers

From your description, it would seem as if you have a number of problems. First check the handlebar switch connectors. Second, check the cabling and connectors behind the fairing. The electrical equipment on motorbikes usually uses the chassis as an earth. So, you may like to check that the failed parts are correctly fitted-no loose bolts.

Posted on Oct 10, 2013


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: radiator fan does not come on, overheating lamp blinks

Disconnect the two fan plugs leads from the fan sensor switch in the thermostat housing bridge the two plugs with a wire if the fan starts then you will need to replace the fan sensor switch if not the fan will need replacing ,as for the temp light flashing with the indicator light maybe because they share the same fuse and they could share a common earth as well?
Cheers Michael

Posted on Jan 03, 2009

  • 1 Answer

SOURCE: wiring problem gilera sc 125 motorbike (derbi gpr 125)

Wrap the wire round the Ht lead two or three times, it induces a signal to the Rev Counte, the wire does not have to be bare or connected to anyting other than wrapped around the lead..

Posted on May 08, 2009

  • 5 Answers


I had the same problem with my 636. It turned out to be just a cable problem. Try to see if all the electric cables work correctly and connected.

Good Luck,

Posted on May 11, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Me horn and indicators dont go. checked fuses and they are fine. dont know where to start.

horn check it works as they can go, relay is probably gone for the indicators. its usually a green relay, but if its original it could be any color. they not on the same wiring as each other.

Dec 13, 2017 | Electronics - Others


Wiring Diagram Kawasaki GPZ 750

Kawasaki GPZ750 (ZX750) Turbo North American models.<br /><br /><img src="suzman_10.JPG" /><br /><br />1 - Right turn <br />2 - High beam<br />3 - Warning light<br />4 - Headlight fail<br />5 - Neutral<br />6 - Left turn<br />7 - Boost Guage <br />8 - Tach light<br />9 - Tach/volt switch<br />10 + 11 - Speedo lights<br />12 + 13 - Illum. lights<br />14 - Spare connectors<br />15 - LCD + warnig lights<br />15 + 16 - LCD illum<br />17 - RF indicator<br />18 - Horns<br />19 - Headlamp<br />21 - LF indicator<br />22 - Reserve lighting unit<br />23 - Hazard switch<br />24 - Indicator switch<br />25 - Horn switch<br />26 - Dimmer switch<br />27 - Starter lockout switch<br />28 - Neutral switch<br />29 - Side stand switch<br />31 - Oil pressure switch<br />32 - Alternator<br />33 - Regulator<br />34 - Solenoid<br />35 - Starter<br />36 - Battery<br />37 - Junction box<br />38 - LR Indicator<br />39 - Stop/tail lamps<br />40 - Stop/tail lamps<br />41 - RR Indicator<br />42 - Injectors<br />43 - Engine temp switch<br />44 - Boost sensor<br />45 - Fuel pump<br />46 - Air temp sensor<br />47 - Throttle sensor<br />48 - Main pump relay<br />49 - Fuel injection control unit<br />50 - Rear brake switch<br />51 - Pick-up coils<br />52 - Ignition control unit<br />53 - Coils<br />54 - Spark plugs<br />55 - Fuel level sensor<br />56 - Front brake switch<br />57 - Starter/engine stop<br />58 - Ignition<br />

on Nov 22, 2010 | Motorcycles

1 Answer

Odo shows insp 02 when switching on ignition

The insp light can come on for a number of reasns. 1st check all yur brake lights, indicators lights etc are working. or it may be due for service or the mechanic may need to reset the service indicator. Check your lights first. Rev counter probably wire come off somewhere.

Jul 01, 2012 | Volkswagen Polo Cars & Trucks

1 Answer

Suzuki GSR600 fuse? problem

they wouldn't have a second set of fuses for that park position so by what you said all the fuses are good. so i would say disconnect battery and then disconnect all wire harness' going straight from the switch and take a look at both sides for looseness, corrosion, bent, pushed or broken pins. you should get some electrical contact cleaner spray.. and clean up the connections if corroded or dirty... then spray a "little" WD-40 into each half and a "little" in the key assembly this cleans out any moisture and will help in reconnecting the connectors. if this doesn't fix it you may have a bad switch assembly.

Apr 28, 2010 | 2006 Suzuki GSR 600

1 Answer

Ignition light on ,horn works ,indicators work will not start

Check your fuse then try again. Do not forget to check your main fuse- the ribbon type (30Amp)

Mar 23, 2010 | 1993 kawasaki GPZ 500 S - GPX 500 R

1 Answer

My car will start but is locked in park ,and brake lights and horn are not working.Can someone tell me what may be the problem?Thank you

problem is in the ignition switch in the steering column the transmission lock pin in the steering column is eather bad or broken this also deals with the horn and sometimes the brakes if the brake peddle is pressed and there is no brake light check the brake switch buy the brake peddle if ok change the switch and also check the park lockout pin

Mar 03, 2010 | 1997 Acura RL

2 Answers

My brake lights wont work,i checked all the fuses,bought new bulbs,and bought a brake switch,and still regular lights come on,just my brake lights dont work.dont no if this is part of the...

Just had a similar problem. Brake (stop) lights and horn didn't work. Couldn't find mention of stop lights in fuse chart. Found horn fuse to be slot 21 in the engine fuse block (not the fuse block in car interior). Replaced 15A fuse and all now ok.

Aug 21, 2009 | 2005 Mazda 3

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

149 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers


Level 3 Expert

80531 Answers


Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides