Question about 2004 Suzuki RM-Z 250

1 Answer

Gear box or clutch??

My bike when gets hot the gear lever gets stuck up or down in a high gear.. i cant select a gear.. soon as i stop and it cools down it is fine again...

Posted by on

  • laney_fmx Apr 22, 2009

    yea thanks mate i lookin through my owners manual and cant find the clutch wire bolt.. let me know where its located would be great thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

U NEED TO SET THE CLUTCH WIRE BOLT LOSE OR TIGHT IT BOLT IT WILL BE OK

Posted on Apr 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My bike wont drive when in gear?


sounds like the clutch is toast though it could be other things assuming its not just stuck ie does the clutch lever return after you press it, if so you could try draining the oil out and pass it through a sieve, if there are bits of friction plate in it then the clutch has definatley disintegrated, if the lever stays in then the push rod may be damaged/stuck or the worm drive may be stuck. does the bike go into gear without pressing the clutch lever or stalling?, if the clutch was slipping prior to it stopping then this is likely a knackered clutch, it could also be the wrong oil in the gearbox or perhaps no oil in the gearbox, does the bike go into gear? does it go through all 6 gears and into neutral? more info is needed and even then without looking its hard to say but my guess would be the clutch is fried

Dec 31, 2016 | Motorcycles

1 Answer

Gsx750 clutch cable


See if you can push the bike with it in gear and the clutch lever pulled in. If the clutch is stuck, push start the bike, jump on, get to about 10 mph, pull in the clutch lever and hit the rear brake hard. This will usually break a stuck clutch loose.

Mar 21, 2014 | 1988 Suzuki GSX 750 ES

1 Answer

I need 2,3 & 4 gear for Yamaha 1100 special 1982 model


Instructions
    • 1 The gears on a motorcycle run in this order: first, neutral, second, third, fourth and fifth. When you are moving, shifting up from first gear will skip over neutral and shift you right into second gear. The only time that shifting up from first will get you into neutral is when you are not moving.
    • 2 Pull in the clutch lever and tap the gear lever down until it stops. This will signify first gear. Pressing the gear lever down will shift you down one step and pressing it up will shift up one step.
    • 3 Tap the gear lever up one click while still holding in the clutch. This will put the bike into neutral.
    • 4 Start the bike. The bike needs to be in neutral to start.
    • 5 Hold in the clutch lever and tap the shifting lever down to shift to first gear.
    • 6 Release the clutch slowly and give it just enough gas to get moving.
    • 7 Listen to the motor to know when you need to shift. If the engine is making a low grumbling noise, then it will need to be shifted down. If it is making a high squealing noise, then it needs to be shifted up.

Jan 15, 2013 | Motorcycles

1 Answer

Where can I find 2/3 & 4th gears for Yamaha XJ special 1982 model.


Instructions

1

The gears on a motorcycle run in this order: first, neutral, second, third, fourth and fifth. When you are moving, shifting up from first gear will skip over neutral and shift you right into second gear. The only time that shifting up from first will get you into neutral is when you are not moving.
2

Pull in the clutch lever and tap the gear lever down until it stops. This will signify first gear. Pressing the gear lever down will shift you down one step and pressing it up will shift up one step.

3

Tap the gear lever up one click while still holding in the clutch. This will put the bike into neutral.
4

Start the bike. The bike needs to be in neutral to start.
5

Hold in the clutch lever and tap the shifting lever down to shift to first gear.
6

Release the clutch slowly and give it just enough gas to get moving.
7

Listen to the motor to know when you need to shift. If the engine is making a low grumbling noise, then it will need to be shifted down. If it is making a high squealing noise, then it needs to be shifted up.

Jan 15, 2013 | Motorcycles

1 Answer

1987 honda 600, starts fine, as soon as you try to get it in gear stops, thought was clutch, but with motor off, 1st gear with clutch applied the bike can be pushed easily.... what it can be? electrical?/


IT MAYBE THE SIDE STAND SAFETY SWITCH HAS GONE FAULTY, COMBINED WITH A SWITCH ON THE CLUTCH LEVER, IT IS DESIGNED TO SAVE YOU RIDEING OF WITH THE STAND DOWN CAUSING THE ENGINE TO STOP WHEN YOU SELECT A GEAR, I WOULD 1STL CHECK THE WIRES LOCATED CLOSE TO THE CLUTCH LEVER FOR CONDITION AND CONECTIVITY, SECONDLY CHECK THAT THE SWITCH LOCATED BY THE SIDE STAND IS NOT STICKING IN WITH DRY GREASE OR DIRT, WITH THE STAND IN THE UP POSITION GENTLY PULL THE PLUNGER OUT ALL THE WAY TILL IT STOPS, START THE ENGINE AND SEE IF THE PROBLEM PERSISTS, YOU COULD THEN TRY DISCONECTING THE SWITCH AND BRIDGING THE WIRES LOOM SIDE.TO ELIMENATE THE SWITCH

Oct 31, 2010 | 1989 Honda CBR 600 F Hurricane

4 Answers

How do i on a motorcycle go to first gear from 5th


hi, if when you start your bike you press the gear lever down to go to 1st from neutral and then pull it back up to go to 2nd,3rd,4th and 5th then the only way to get back into first gear is to press the gear lever down 4 times to get it back into 1st gear their is no quicker way to do this you have to work your way back down the gears.

if your coming to a stop quick then just pull the clutch in and keep pushing the lever down until it dont push down any further it will only go down 1 gear at a time so you will need to push it down 4 times but you dont need to count you can just keep pressing it down the gears until it dont go down any more then you know this is first, you need to keep the clutch in when doing this.

how ever if your slowing down is more gradual then what you can do is go from 5th down to 4th then let engine slow the bike down then when the revs drop down change down to 3rd and so on until you get ot 1st gear.

if your coming to a stop quick say at lights or junction then if the bike is in 5th gear then you can change down the gears once the bike has stopped just hold the clutch in when you stop and keep tapping the gear lever down until you feel that its not going down any more gears this way you know its in 1st without having to cound down the gears, their id no quicker way of going down the gears to get to 1st.

i hope i have read your question right and gave you the answer you was looking for if i got the question wrong then please explain then i can assist you further ok

May 23, 2010 | 2005 Yamaha Xv 250 Virago S

1 Answer

Hi I can not select any gears on my blackbird, Clutch works and stuck in 1st gear. Any idea what has broken. I guess the selector has gone.Is there a common fault and Fix. Do i need to remove the Clutch...


make sure gear lever is tight on its shaft!
you my be able to rock bike back and forth without using the clutch, while shifting the lever at the same time
the selctor mechanism inside the cover may be worn or broken

Jul 20, 2009 | 2005 Honda CBR 1100 XX Super blackbird

2 Answers

Coupling is stuck / sticks together


Is the bike shooting forward while you have the clutch lever pulled in or when you let it out? If it's when you let it out you have to do it slower and roll on the accelerator so that it doesn't stall. If you have the clutch lever all of the way in and it shoots forward you may need to see a mechanic... I'm sorry if this doesn't help much.

Nov 10, 2008 | 1977 BMW R 75-7

1 Answer

Stuck in gear


ry useing blue LOCTITE on the pinch bolts and other fasteners to keep the shifter from vibrating loose again. I had the shift linkage vibrate loose on my Thruxton when it was new, I had to fix it on the road to get home.

Nov 10, 2008 | 2007 Triumph America

Not finding what you are looking for?
2004 Suzuki RM-Z 250 Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...