Question about 1996 Suzuki GSX-R 750 T

2 Answers

I have a 1996 GSXR 750 and i flushed my radiator and put in new fluid all the way to the top. But know when it starts to get to 200 Deg. it boils out from the top. ?

Posted by on

  • Anonymous Apr 22, 2009

    ya, i put the radiator cap back on but it will still over flow and come out threw the top.

  • Dick
    Dick May 11, 2010

    You have air in your system. Look near the top of the radiator or close to the upper radiator hose on the engine for a bleed screw. You can either use the bleed screw (which may not be present on your bike, I have no service manual in front of me) or try pumping the radiator hose to get the air out.

    You did put the radiator cap back on all the way, right?


×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Check to make sure your sending unit and cooling fan work first,than make sure the water pump is circulating,open the radiator cap with the bike running and you will see the fluid moving if it is working.

Posted on Apr 23, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Or you could try not filling the thing up with fluid...generally you shouldn't due to the fact that it gets hot and boils out....so try not to fill it up all the way...also you should have a reserve that the boiling liquid can chill out in. make sure thats no more than halfway or you will have liquid boiling out.

Posted on May 24, 2009

  • mwmbobcat May 24, 2009

    or you could try not filling the thing up with fluid...generally you shouldn't due to the fact that it gets hot and boils out....so try not to fill it up all the way...also you should have a reserve that the boiling liquid can chill out in. make sure thats no more than halfway or you will have liquid boiling out.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Hi my camry 300sei boil the water out but the haetgage seems ok when I open the rediotor cep the water is empy and the car is warm can u please help!!!!


When cold fill the radiator with water and leave the cap off. Make sure that you have all the air out.
Start the car and watch the radiator, you are looking for air bubbles coming out of the radiator. If you have a steady stream of bubbles appearing you have a blown head gasket.

Feb 25, 2015 | Toyota Camry Cars & Trucks

1 Answer

Bad radiator


Step_1 disconnect inlet (top hose) & outlet bottom) hose. I'm assuming you're replacing a corroded radiator. They now offer copper or plastic radiators that have high resistance to corrosion. If you replace with alluminum or steel radiator, do a flush job yearly with replace with the green radiiator solution or the red one if you replaced with aluminum radiator.
Step_2 disconnect the electric fan. first unhook the wire connection, then loosen the 4 screws that's holding the fan assembly against the radiator.
Step_3 Loosen the bolts holding the radiator unit. When re-attaching the new radiiator, install new hoses as well. Fill the radiator through the pressure relief cap with 60-40 radiator to water mixture. The instructions say 50-50, but 60-40 is a stronger solution that prevents freezing, boiling, & corrosion buildup. It there's a coolant filter, replace this unit as well. It looks like an oil filter cartridge.
Preventive miantainance: Perform a coolant flush every 50K miles. Most car manufacturers recommend 30K miles or 2 years, which ever comes first, but that's to boo$t revenue for car dealership service centers. IMO the max is 70K or 2 years. When you notice the temperature is overheating in the summer months, an engine radiator flush AND replacing the thermostat is the solution. Most shops will say "you need a new water pump" and the scammer had not even performed a diagnostic test. The water pump will last the life of the engine (140K+ miles) unless the car had run dry without radiator fluid. The radiator fluid lubricates the water pump. Running the engine dry (or low of) without radiator fluid damages the water pump. Running tap water instead of 50-50 or 40-60 radiator fluid mixture will also cause premature wear on the water pump because water by itself is insufficient lubricant on the water pump.

Mar 12, 2014 | 1996 Cadillac DeVille

1 Answer

Radiator flush


Where are you located sherdibelle, is the cost labor and parts. See if you can find a radiator shop that will boil out your radiator. I quickly checked and a after market radiator cost $150.00-$200.00 so the place you went to is charging $800.00 labor or is this at a dealership. what is the labor rate.

Feb 07, 2014 | Chevrolet Cars & Trucks

1 Answer

How can i tell if i have a blown gasket i cant really tell where water is leaking from but i can kins see it running out what looks like a pan or somthing under like the water pump area under cranshaft and...


Hi, If you see white smoke coming from tail pipe then you will know it is leaking through engine.
I would suggest after you replace head gasket, that you put new radiator fluid (50/50) mix and a new thermostat in. The fluid will keep it from boiling over. Good luck.

Jun 14, 2011 | 1985 Oldsmobile 98

3 Answers

Hi my name is Heath. I have a 1990 Ford Bronco. The other day after i drove it home, I pulled in the driveway and turned the engine off. I got out and heard a hiss so i opened up the hood and I saw brown...


A flush and a thermostat is never a bad idea, but it sound like your radiator cap is worn out, not holding pressure, replace it, should have a 16 lbs rating radiator cap.

Aug 23, 2010 | Ford Bronco Cars & Trucks

1 Answer

Have a new waterpump, a new 185 thermostat. Truck runs at approx. 200 deg, and overheats when towing anything.


Try turning the heat on high when you're towing. If this helps, you could try flushing your cooling system. But you probably need a new radiator. Good luck.

Jun 02, 2010 | 1996 Dodge Ram 1500 Club Cab

1 Answer

How to start the gsxr 750 after running out off


It should start fine - unless you have drawn gunk from the bottom of the tank into the fuel line, in which case you will need to strip and clean the carbs.

Jun 30, 2009 | 1996 Suzuki GSX-R 750 T

1 Answer

Want to flush my radiator but can't find drain screw (plug?)on water pump. It's for a 2003 GSXR 750.


if you can't find on on the radiator. just remove the lower hose to drain the rad and hook up your fluh kit to where it recommends and flush the system out.

Apr 11, 2009 | 2003 Suzuki GSX-R 750

2 Answers

Water heating radiator and water expulsion oily reddish color


Sounds like you have transmission fluid in the antifreeze. The transmission cooler might be leaking in the radiator. If it is, replace the radiator.

Mar 26, 2009 | 1996 Ford Explorer

Not finding what you are looking for?
1996 Suzuki GSX-R 750 T Logo

Related Topics:

315 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...