Question about 1998 Yamaha FZS 600 Fazer

1 Answer

Switch clicking on start up wont start lights flash at same time

Clicking noise and lights flashing on display when pressing starter switch.bump starts ok,when you stop it wont start with switch.Sound like something sticking!intermittent problem!

Posted by on

  • Dick
    Dick May 11, 2010

    Sounds like dead battery to me, what voltage do you get from the battery while attempting to start? Below 10v is faulty battery for sure.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Tried the battery, charge it manually, sounds silly but i had this problem with my 600ss
thanks

Posted on Sep 07, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

95 chevy lumina.. security light flashing car wont start, passkey 2.. can i relearn it? how can i fix it cheap??


If your key has the black bump on the side of it, you can try to clean it. That is the resistor for the security system. The ignition reads that bump and if the resistance doesn't match, it won't start.

Nov 27, 2013 | 1995 Chevrolet Lumina

1 Answer

Mini cooper 2004 wont start


sounds like you are losing ground,make sure your battery terminals are clean and tight

Oct 17, 2017 | Cars & Trucks

1 Answer

How do I program a Noma N1506 timer?


All Woods timers and manuals
ttp://waterheatertimer.org/Woods-timers-and-manuals.html

N1506 manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.

To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.

To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.

Plug lights into timer.
If lights have a switch, switch must be on.
For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.

Dec 12, 2010 | Solar Noma 7 Day, 6 Event Outdoor Timer -...

1 Answer

How do I set the Woods N1506 timer?


N1505 timer manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.

To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.

To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.

Plug lights into timer.
If lights have a switch, switch must be on.

For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.

Dec 01, 2010 | Woods Outdoor Lighting Timer

1 Answer

Model N1506, I need Operation instructions for this Woods Light Timer?


N1505 timer manual:
http://waterheatertimer.org/pdf/Woods-49122-N1506-manual.pdf

N1506 is heavy duty outdoor timer with display screen.
Plug timer in and display flashes C.
Set current time: press Time button once and display shows 1 am
Keep pressing time button until current time with am pm displays.
Dot in lower right corner corresponds to pm hours.

To set timer program:
Press Mode button, display flashes P
Press Time button until desired ON time displays.
Press Mode button again and display flashes E
Press Time button until desired OFF time displays
When programming is finished, press Mode button and display shows current time.

To reset timer, unplug timer for 10 seconds and re-program timer.
Timer must be reset after power outage. Display will warn by flashing C.

Plug lights into timer.
If lights have a switch, switch must be on.
For manual override, press Mode button, and display shows O and lights will be ON until next program change.
To use timer function, press Mode button until current hour displays.

Dec 01, 2010 | Hardware & Accessories

1 Answer

Installed the prestige remote start(aps687n) on my 95 jeep grand cherokee but when i try to remote start my parking lights just flash 7 times and nothing happens. Any ideas???


Yes, the seven flashes mean that the tachometer setting has not been programmed. If you hooked up a tach wire (green with orange stripe) to an uncommon coil or injector wire, then you have to program tach: turn ignition on, press and release programming switch three (3) times. The parking lights will flash once to confirm. Turn ignition off. Press and hold programming switch. While holding the programming switch, start the vehicle. The parking lights will flash to confirm that the remote starter is getting a tach signal from the vehicle. Continue to hold the switch for approximately 15 seconds.The parking lights will continue to flash while holding the switch. Release the programming switch. The parking lights will come on solid for one second, then go off. The tach is not programmed. Turn ignition off. Test system.

Sep 19, 2010 | Prestige Remote Start

1 Answer

98 honda crv wont start unless bump started, starter motor?


will it start with a boost? either the starter motor or the battery. take the battery to auto zone and they will test it for you.

May 24, 2010 | 1998 Honda CR-V

1 Answer

Astra remote car starter problem


your remote starter is in valet mode, the door lock will still work but no remote start, try pressing the trunk button 3 times, if that doesn't work turn the ignition switch on and off 5 times

Jan 03, 2010 | Astra Car Alarm And Remote Starter,...

1 Answer

Is there a reset switch on 2007 gsxr 750. wont start


You have some crushed wiring along the frame. Check the wiring from the switch along the frame under the seat for a rub or a pinch in the insulation. It has a short causing the lights to flash.

Sep 24, 2009 | 1996 Suzuki GSX-R 750 T

Not finding what you are looking for?
1998 Yamaha FZS 600 Fazer Logo

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1147 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...