Question about 2005 Honda CRF 250 R

2 Answers

My neighbor brought his bike to me saying he bike was knocking its 2005 crf250r so i started it started fine but it started knocking i told him it sounds like he needs oil so i check the oil sure enough empty so i put oil in the bike put still knocks.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 20 Answers

If u wanna save some trouble, dont run it before you rebuild it. You risk the entire engine alot more if you do. Its a high performance engine that holds only enough oil to keep it lubed properly, any less than the correct amount will cause traumatic wear on the bike extremely fast. Once parts start to fail inside the engine there no stopping them. Slowing it down with oil now is about all you can do but it will eventually tear itself apart from the inside out.

Posted on Mar 23, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Well i currently ride a new 250 06 crf but the last time i had a knock was on my 2000 cr 250 and that was piston slap cuz the rings where shot..

Posted on Apr 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Honda CRF 250 R carb overflow


Hi, Anonymous and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. Worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
8. Damaged petcock diaphragm allowing fuel to flow through the vacuum line into the combustion chamber.
9. Contaminated fuel tank.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
06 crf250r leaks gas when turn it on General Discussion
RePost 04 CRF 250 oil overflow hose
Honda 2004 CRF250R Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
HONDA CRF250R 2005 Owner Manual

Jun 21, 2014 | 2005 Honda CRF 250 R

1 Answer

2005 Honda CRF 250 R won't run without the choke on


Hi, Anonymous and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://crfsonly.com/forum/viewtopic.php?t=36766
bike wont idle without choke on why
Honda 2004 CRF250R Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CRF250R Owner Manual Competition Handbook

Jul 16, 2012 | 2005 Honda CRF 250 R

2 Answers

2005 Honda CRF 250 R how to replace the throttle cable


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to fix sticky throttle on crf250r 04 09
Dirt Bike Throttle Cable Installation
Honda 2004 CRF250R Service Manual
Honda CRF250R Owner Manual
https://www.partsfish.com/page/oem-parts-for-honda

Mar 24, 2012 | 2005 Honda CRF 250 R

1 Answer

Hi, i have brought a 2005 cbr600rr second hand. it only came with 1 key which was stolen out of my car.. i contacted the guy i brought the bike from and said he lost the spare, it has a HISS ignition and i...


hi, yes this is correct, you will have to buy a key from honda and have them re code the key for you, you will have to have the bike pluged in to a diagnosic machine for recodeing at a dealership

Jan 22, 2011 | 2005 Honda CBR 600 RR

1 Answer

2005 HONDA CRF 250 R HARD TO START WHEN HOT


Hi, Stevensmi601 your bike starts great when cold but once it reaches operating temperature and the engine is shut off for a few minutes then you try to restart it and it will turn over but will not fire or it doesn't do anything, the usual suspects are:
1. When electronics get hot they build up resistance then stop working. It might be an ignition coil, stator, CDI unit etc. First, you must find out if the spark dies out. When the bike won't start, pull a plug wire off, stick a new spark plug in the end and ground the threads on bare metal while someone cranks the engine over. You should see a nice big blue spark between the spark plug gap. Incorrect spark plug gap will cause or contribute to a no start when hot issue.
2. Fuel Tuners have been known to cause this type of problem, disconnect it and see if resolves the issue.
3. Any engine management sensor could be faulty especially the ones that monitor temperature.
4. Gas cap not venting properly, improperly routed fuel lines they must always go down from the gas tank to the carburetor never in any kind of a loop this will cause a vapor lock. Clogged, bent, kinked, pinched or restricted carburetor vent lines will do the same.
5. Overhead camshaft valves adjusted too tight when cold, this will cause loss of compression when hot, except for pushrod engines they usually get looser when hot.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://crfsonly.com/forum/viewtopic.php?t=28695
honda CRF250R Hard to Start
Honda 2004 CRF250R Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
HONDA CRF250R 2006 Owner Manual

Nov 06, 2010 | 2005 Honda CRF 250 R

3 Answers

Starting problem with honda crf250r 09 model when cod or hot


I have a honda crf250 2009 model i recently brought it off a mate. Had the same problem could not get the thing started. Missed races cause of this... I worked out how to get it started. On Cold start, turn the fuel on give the throttle 3 full pumps. Then do not touch it! Put ur hand in the middle of the handlebars if need be. Kick start the bike still may take a couple kicks but on mine its generally about 2-4 kicks. Then through out the day when u want to start it do no twist that throttle it just squirts fuel in and u may as well just pack it up!! I know this is what i have to do not saying yours will be the same but i hope it all works out!!!

Dec 13, 2009 | 1987 Honda Vf 1000 F

Not finding what you are looking for?
2005 Honda CRF 250 R Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4888 Answers

yadayada
yadayada

Level 3 Expert

79847 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...