Question about 2003 Yamaha YZ 125

2 Answers

Diffrences betweein oils

What is the diffrence between transmition oil and motor oil? where do each oils go?
what oil should i put in the oil cap of my yz 125 2001 model? thanks for any help Ryan Dundas

Posted by on

  • Dick
    Dick May 11, 2010

    Ryan, if you have more questions on this add comments here. It's much easier to follow your problem when you keep everything together.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Your bike does not use tranny oil.only motor oil.your gears are lubricated by your motor oil as well as your clutch.it works by a sump system.I use yamahlube for my bike.

Posted on Apr 21, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Transmission oils are primaraly hydrolic fluid they don't have any detergents in them to contain the oil suspended in them, and they are not a very good source of lubrication for bearings or clutches

Posted on Dec 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a v6 ve commodore with a HBE engine can I put a HBE engine in it what is the diffrence Ta garry


yes possible
will create electronic miss- matches to be sorted

Holden Commodore VZ VE V6 Alloytec Motor Engine HBE engine code AUD 1 250...

best ve commodore owners forum around
https://forums.justcommodores.com.au/forums/ve-holden-commodore-2006-2013.75
s-l1600-534lvbbiedo0ovj13canlnto-4-0.jpg

Apr 30, 2017 | Cars & Trucks

1 Answer

How to replace the drive belt tension on a 2008 corolla?


The first step is to remove the belt, this is a tight spot, heres a diagram of the tensioner, there are two types, spring tensioner or hydraulic, you will know the diffrence , i will show you the diffrence and also a diagram to remove belt and the location of the two bolts to remove the tensioner. good day.johnjohn2_124.jpgjohnjohn2_125.jpgjohnjohn2_126.jpgjohnjohn2_127.jpg

Aug 17, 2011 | 2008 Toyota Corolla

1 Answer

I have a 2000 astro LS it has never given me problems till now.when i start it there is a ticking or knocking.sometimes it does it and sometimes it wont.i have checked the oil and topped it off,but no...


Sounds like you have sticking lifters. On your next oil change run motor flush through it before you change oil. There's also additives you might try of oil change isn't in near future - Risolone or Marvel Mystery Oil (I know, sounds weird) both are fantastic products.

Jan 06, 2011 | 2000 Chevrolet Astro

2 Answers

I need to change the oil transmition of my suzuki forenza 2005. In adotion the traqnsmition have a leak.


there is a plug not a dip stick. drive the car on ramps,block the wheels and lets begin.slid under look for the passenger drive axle were it goes into the trans.right below the axle is the fill plug.it is a 5/16 square hole,u can buy the tool # DW260 -070.or do what i did and make my own,take a 5/16 peace of key stock and a 6 inch long 3/8 drive extension a grinder and a file.us the key stock as a templet and machine the extension down to size and there u go ready to work

Aug 30, 2010 | 2005 Suzuki Forenza

1 Answer

Hi my shop rider will not go forward it just juders on the spot the batterys are fully charged but this makes no diffrence


Hi. Sounds like worn motor brushes, or a stuck brush in the motor. Unscrew the brush caps and check that the brushes can move freely. Sometimes it helps to give the brushes a very light filing with a fine file.
When you do up the caps again, be careful as they can crack if done up to tight, but they need to be firm.
Good luck. Neil.

Jul 01, 2010 | Shoprider Front Wicker Scooter Basket

1 Answer

Dose not shift when outside temp is 20 degrees


may have aweak pump. try flushing the transmission with a bg machine, that might help.it works 60% of the time i think irs worth a try, and also in cold temps the oil is real thick many car and trucks shift slower. you should let it warm up, that make a big diffrence through out the whole truck. hope this helps.

Jan 04, 2010 | 1988 GMC K2500

2 Answers

I have a 98 Ford Expedition,The valves clatter when you accelerate in drive,ive put octane booster in gas,still clatters. is it possible that the egr valve is not opening correctly?if so ill check and the...


Yes i agree this is a egr problem can you put vacuum to the egr valve while it is running to see if the idle drops if it does then the valve itself is good .Then check the dpfe evr solenoids :)

Sep 30, 2009 | 1998 Ford Expedition

1 Answer

Diffrence bwetween ac in volts and dc


DC is direct current and AC is alternating current.

eg; 12 volts DC stays 12 volts constantly, positive or negative.

12 volts AC (at 60 Hertz or cycles per second) alternates from positive to negative then back to positive voltage again 60 times per second.

Sep 12, 2009 | GE JVM1790 Convection / Microwave Oven

1 Answer

1998 overheating, and i put cooliant in it?


time for a head gasket your car has a blown head gasket common problem. Do a commpression test on each cylinder to find and commpression lost if so you know you need a need head gasket. Make sure you have no more than a 20 psi diffrence and add a little oil helps for commpression. The kit to test is called a commpression test kit you can rent it or buy it in an autoparts store. Call them to ask if they have on on hand before you waste time.

Jul 11, 2008 | 1998 Dodge Neon

2 Answers

Diffrences between win 2000 & win 2003 ?


Hi Sir Nice quition see what is the diffrences between win98 and XP u know sir ''''''''''' see below
********* win2000server and 2003 diffrence men Security and advanced server Tools is their ok byy*********

Apr 18, 2008 | Microsoft Windows Server Standard 2003 for...

Not finding what you are looking for?
2003 Yamaha YZ 125 Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...