Question about 2003 Triumph Speed Four

2 Answers

Electrical question regarding speed four

I'm hoping someone can help with the following,

I have just installed a Triumph approved datatool S4 alarm alarm which was straight forward except for one aspect and that was the installation of the ignition connector. The problem is that i cannot locate the 8-way connector mentioned in the instructions which is where i'm required to cut the igniton wire either side of the 8 way connector, to be honest i'm not sure what this connector does but i'm sure it is to be fitted. So if anyone can identify where i'm to find the 8 way connector then that would be much appreciated,

Regards

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Should e connected to left rear blinker plug under your seat

Posted on May 14, 2017

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You could try T595.net ... they have lots of smart guys with answers to stuff like this ... at a guess you are looking for a bundle of black wires that goes to a socket/plug under the seat ... the plug will have one or two loops of wire making the ignition circuit ...
If you had a factory alarm fitted it would be plugged directly into this connector

Posted on Jun 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a triumph sprint 955i with a datatool alarm on it. I replaced the battery and now the imobiliser wont work please can you help


Hi, Graham I get hundreds of Datatool questions and they are all bad there is no doubt in my mind that this alarm system is sub- standard and you should consider replacing it with a top of the line product which means the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.sonicsideshow.com/blog/-how-to-bypass-a-datatool-system-3-motorcycle-alarm
datatool alarm can remove the pain in the aaaaaa hole Problem Solving Tech...
http://www.nirvana-motorcycles.com/Triumph%20Sprint%20ST%20RS%20955%20Service%20Manual%201999.pdf
http://www.worldoftriumph.com/triumph-motorcycle-parts.html
Triumph Sprint ST Owner Handbook Manual

May 25, 2017 | Triumph Motorcycles

1 Answer

Triumph thunderbird alarm will not disarm


Hi, Sandy the answer to this question is way above my pay grade and for this situation, I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Putting alarm in service mode
Datatool S4 won disable
Triumph Thunderbird Service Manual
http://www.triumphestore.com/
Triumph Thunderbird Owner Manual

May 06, 2017 | Triumph Thunderbird Motorcycles

1 Answer

My alarm is beeping continuously and I cant stop it. My wife is going to kill me.


Hi, Glenys for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Datatool S4 won disable
Thread Datatool Alarms How to disarm
http://www.datatool.co.uk/PDF/S4C1-User-Guide.pdf
Datatool S4 Video mov

May 03, 2016 | Motorcycles

1 Answer

How to remove datatool s4 c1 red


Hi, Tony for more information about your question and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
Thread Removing alarm
Datatool S4 Video mov
http://www.datatool.co.uk/PDF/S4C1-User-Guide.pdf

Feb 24, 2016 | kawasaki Motorcycles

1 Answer

Datatool s4 alarm does not arm or disarm


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Datatool S4 won disable
http://forums.sv650.org/archive/index.php/t-161339.html
http://www.pistonheads.com/gassing/topic.asp?t=1305699
https://www.datatool.co.uk/wp-content/uploads/2015/11/S4C1-User-Guide.pdf
Datatool S4 C4 alarm problem
FAQ S4 Red Datatool

Jul 01, 2014 | 2009 Yamaha WR125X

1 Answer

Datatool alarm


Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
FAQ S4 Red Datatool
https://www.datatool.co.uk/wp-content/uploads/2015/11/S4C1-User-Guide.pdf
http://www.pistonheads.com/gassing/topic.asp?t=1305699
http://forums.sv650.org/archive/index.php/t-161339.html
Datatool S4 won disable

Jul 01, 2014 | 2010 Yamaha WR 125X

1 Answer

I would like a manual for a datatool alarm for a triumph daytona


Datatool alarms aren't just for specific bikes, they have there own model numbers Datatool 3 Datatool 4 etc. Find out which model you have (from the basing) and see if Datatool will supply you the manual www.datatool.co.uk/consumer/contact

Jun 26, 2011 | Triumph Daytona 955i Motorcycles

1 Answer

Wont start think its to do with alarm system how do u reset it


alarms supplied by Triumph as accessories were in fact Datatool alarms, do a google search for Datatool and see who sells or distributes them. the Datatool website will probably lead you to their helpdesk.

Jul 08, 2009 | 2002 Triumph Trophy 1200

Not finding what you are looking for?
2003 Triumph Speed Four Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...