Question about 1982 Honda CX 500 B

1 Answer

When i accelerate hard on my cx500 eurosport the clutch goes solid and i cannot change gear until i slow down ,any ideas ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Change the oil and oil filter. Ride the bike for 50 miles or so then change th oil again but w/o another filter. Dirt and grit in the oil is making the clutch grab and not fully disengage. Changing oil will flush the gearbox. 10w40 motor oil.

Please rate this solution. Thanks bloohart!

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 toyota Camry manual hard shifting from 1st to 2nd gear


With the engine off see if the shift between 1st to 2nd feel,s free if not it could be the cable check the clutch is disengageing all the way it should go into reverse without crunching,other then that it could be a synchro ring worn check that the gearbox has the right oil in it.

Dec 20, 2015 | 2008 Toyota Camry

1 Answer

Is it normal for the revs to stay up when changing gear in a 2002 4x4 3.0L turbo diesel navara?


do they revs drop off when taking pressure off accelerator pedal when out of gear? if only staying high during gear change it would suggest a worn clutch friction/pressure plate so the engine isn't slowing down when clutch is depressed .I'd also have the OBD codes read to see if there is a sensor/switch at fault , but sounds like the clutch to me

Jun 21, 2014 | Nissan Navara Cars & Trucks

1 Answer

Slow pick up


Maybe your clutch slave cylinder is bad.

Apr 14, 2017 | Hyundai Accent Cars & Trucks

1 Answer

Auto trans gear changes down then back up when cruising


run fault codes and check for TCM problem. Have the fluid changed and the filter cleaned out and while the pan is off have the bands and clutch pack adjustments checked.

Feb 05, 2014 | 1993 Toyota Land Cruiser

1 Answer

Loud whine then knock in overdrive


well, without hearing the noise myself, i could guess that the torque converter clutch might be going bad. the torque converter is the part that transfers the power from the engine to the transmission via viscous fluid motion, the converter also has a clutch that internally provides a direct connection inside the converter for better fuel economy. but as with anything labeled as a clutch, it wears down to a point where is slips. the noise your hear could be the torque converter clutch slipping. i owned a 90 astro van with the same drivetrain that made a noise similar to what you speak of up hills. while driving up hills, fully depress the accelerator and if the clunking noise occurs, then the whine goes away as you accelerate faster in a lower gear, very likely this is the case. you would have to have a transmission shop diagnose further. i drove that old van for five more years cause i didn't want to pay to have transmission repaired. it can be very expensive.

Jul 08, 2010 | 1992 Chevrolet S-10 Blazer

4 Answers

How do i on a motorcycle go to first gear from 5th


hi, if when you start your bike you press the gear lever down to go to 1st from neutral and then pull it back up to go to 2nd,3rd,4th and 5th then the only way to get back into first gear is to press the gear lever down 4 times to get it back into 1st gear their is no quicker way to do this you have to work your way back down the gears.

if your coming to a stop quick then just pull the clutch in and keep pushing the lever down until it dont push down any further it will only go down 1 gear at a time so you will need to push it down 4 times but you dont need to count you can just keep pressing it down the gears until it dont go down any more then you know this is first, you need to keep the clutch in when doing this.

how ever if your slowing down is more gradual then what you can do is go from 5th down to 4th then let engine slow the bike down then when the revs drop down change down to 3rd and so on until you get ot 1st gear.

if your coming to a stop quick say at lights or junction then if the bike is in 5th gear then you can change down the gears once the bike has stopped just hold the clutch in when you stop and keep tapping the gear lever down until you feel that its not going down any more gears this way you know its in 1st without having to cound down the gears, their id no quicker way of going down the gears to get to 1st.

i hope i have read your question right and gave you the answer you was looking for if i got the question wrong then please explain then i can assist you further ok

May 23, 2010 | 2005 Yamaha Xv 250 Virago S

1 Answer

1966 Falcon with C4 Transmission I changed out fluid and filter


Generally, what causes C-4's and C-6's to be slugish going into gear, is the seals on the servo pistons are getting hard. The servo pistons are what apply pressure on the clutch packs, when the seals get hard the oil can blow past the piston and the clutch won't engage. It's worse when the the trany is cold and usualy gets better as the oil gets warm. You could try some transmission conditioner, the cheep stuff works as good as the high dollar stuff. Don't rev the engine to try to get it to go into gear, the clutch is trying to engage and you will burn the clutch up pack. If the clutches were replaced 3k miles ago why didn't they put seals in it at the same time?

Nov 24, 2009 | 1966 Ford Mustang

1 Answer

Goes into neutral and then shifts hard into 1st on slowdown


It sounds like your input clutch seals are rolling. Is the check engine light on. It could also be the pressure control solenoid could be causing the problem aswell

Sep 02, 2009 | 1998 Buick Century

1 Answer

Clutch issue? 89 toyota PU 4x4 V6 150,000 miles


Yep, you got it. Assuming spring tension on pressure plate feels normal (you should know with 150k mi) then the clutch disk is worn. Time for replacement.

Jun 22, 2009 | 1991 Toyota 4Runner

Not finding what you are looking for?
1982 Honda CX 500 B Logo

Related Topics:

312 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...