Question about 1972 Honda CB 250

2 Answers

I clean the carb and all jets and still not runnin

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

The tip of the neadle valve is no good, also where the carbs slide into rubbers on the head while running spray starting fluid only around the rubber if the engine reves you are sucking air. they will nead changed.check float bowl. see if the are full. if not clean fuel shutoff. remove from tank. there are 2 brass filters on the end of the shutoff. see if flowing free and clean.also pull the top off carbs look at vacume cup. it is rubber with a spring. where the slider is. look to see if rubber is cracket. check play on the slider to the bore. must be snug. but slide up and down with no drage.

Posted on Jun 05, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Try the air filters. And if the carbs have boots make sure they don't have holes and are in good shape.

Posted on Apr 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Smoking when running, like its too hot, not exhause type of smoke


It's probably runnin lean. Make a new mix and turn the jet on the carb closest to the air filter counter-clockwise an eight to a quarter turn.

Oct 24, 2013 | Echo Garden

1 Answer

Have to choke to keep runnin and still not runnin to par


If your engine is only running while the choke is on, and dies out when you take it off choke, then your engine is starving for fuel. You will need to get the carburator cleaned to correct the problem. Usually it is the lower fuel jet that stops up. Get someone that is experience with carb's to work on it if you are not. Good luck.

Jun 18, 2011 | Garden

1 Answer

My sons 600 VLX has been running lousy since he bought it. I have narrowed it down to the carb & put mine on his, now his bike runs perfectly. what can be wrong with the carb, i have cleaned & re...


it may have to be takin apart and put in a solvent to remove varnish--are u sure the jetting procedure was done rite-thats a sensitive task-may be runnin to lean which can fry the engine valves--do u have a shop jet manual for that model

Jan 01, 2011 | Honda VT 600 C Shadow Motorcycles

1 Answer

My bike is drinking too much petrol. it's averaging below 30 what to do?


its runnin too rich-ajust carb jets--spark may be weak-test batt for holding 12v--plug should be tan or brown-chec it

Sep 17, 2010 | 2006 Hero Honda Passion Plus

1 Answer

Back fire in air filter on accelerate


ur probly runnin rich-inspect carbs-may need to ajust float level or jets-do u hav a shop manual--

Aug 31, 2010 | Harley Davidson FLSTC Heritage Softail...

1 Answer

My pit bike wont stay runnin


sounds like your carb could be blocked with dirt if it wont start unless you put juice down plug i would take the carb off and give it a good clean and also make sure the jets ok just clean them with carb cleaner and a paper clip

Aug 06, 2009 | Pit SSR 110CC Pro Beginner Bike

1 Answer

Yamaha v star 650 runs with choke on only


That is the problem,You need to clean the carb jets and get the gum out of the bowl.

May 22, 2009 | 2004 Yamaha V Star Classic

Not finding what you are looking for?
1972 Honda CB 250 Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...