Question about 2004 Yamaha YZ 250 F

1 Answer

How much oil do I put in my 06yz250f and where are the drain plugs?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

1.06 quarts w/o filter change > 1.27 quarts with filter change. 10w40 motor oil, any major brand. The gearbox drain plug is on the left case a little lower than the shift pedal.

Posted on Apr 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Do I need a mechnic for changing oil in my chevi


No. The oil is very easy to change. All you need is a filter wrench and a 15 mm. socket, and a drain pan. Get under the truck and the oil filter is right there and the drain plug is in the oil pan. Drain the oil first, then remove the oil filter with the filter wrench. Take your finger and dip it in the oil and put a film of oil on the new oil filter gasket. Then install the new oil filter. Once you install the new oil filter, put the drain plug back in. Then put 5 quarts of new oil in the oil fill.

Jan 11, 2011 | 1999 Chevrolet Silverado 1500

1 Answer

How to change the oil filter


Put the car on a lift or jacks. Since it has low clearnance you will need lower jacks or use a ramp.

Remove the oil cap and the oil filter. You may need a strap wrench if the oil filter is too tight to come off by hand.

Look for trap door under the metal cover underneath the car. Open the trap door and you will have access to the oil pan drain bolt.

Use 17mm socket to remove the drain bolt and catch oil into a basin.

Remove the oil filter from the oil cap housing. YOu will also have to remove a large and small oil ring as well as a washer. The new filter will come with those. The oil rings must go into the groove to prevent oil from leaking. The filter goes on the cap housing. The washer that comes with the oil filter goes with the drain plug. Take off the old washer drain plug and put on the new washer drain plug and drain bolt once all oil has poured out.

Ratchet in drain bolt and close the trap door. Put on oil filter by hand. Put in 7 quarts of 5w-30 oil. Check with the dipstick as you get to the last half quart.

Replace oil cap, start engine, and check for any indications of leaks.

Aug 25, 2010 | 2006 BMW 3 Series

1 Answer

How do i change the oil filter on a 1991 cutlass calais? any special tools?


YOU NEED 4.5 QUARTS OF OIL WITH NEW OIL FILTER.YOU NEED OIL FILTER WRENCH YOU NEED WRENCH TO REMOVE OIL DRAIN PLUG.YOU NEED A DRAIN PAN CATCH OLD OIL.NEED LATEX GLOVES TO KEEP GETTING OIL ON HANDS.OIL DOES CAUSE SKIN CANCER.NOW YOU CRANK CAR UP LET IT IDLE 5 MINUTES TO LOOSEN UP OIL AND SLUDGE.TURN OFF ENGINE.SAFELY RAISE SUPPORT VECHICLE ON LEVEL SOLID GROUND USING JACK STAND.PLACE DRAIN PAN UNDER OIL PAN THEN REMOVE OIL DRAIN PLUG LET OIL DRAIN OUT UNTIL IT STOP DRIPPING. PUT OIL DRAIN PLUG BACK IN OIL PAN. THEN SLIDE DRAIN PAN UNDER OIL FILTER REMOVE OIL FILTER LET OIL DRAIN UNTIL IT STOP DRIPPING.TAKE CLEAN PAPER TOWEL WIPE OIL FILTER SEAL SURFACE MAKE SURE NO DIRT ON SURFACE.TAKE NEW OIL FILTER POUR NEW OIL IN FILTER UNTIL ITS ALMOST AT TOP THEN.RUB CLEAN OIL ON NEW OIL FILTER SEAL.THEN PUT NEW OIL FILTER IN PLACE HAND TIGHTEN IT.POUR 4 QUARTS NEW OIL IN ENGINE CRANK CASE USING A FUNNEL.WHEN DONE.CRANK THE ENGINE CHECK FOR LEAKS AT OIL FILTER AND OIL DRAIN PLUG.IF ALL IS GOOD JOB WELL DONE.

Aug 11, 2010 | 1991 Oldsmobile Cutlass Calais

1 Answer

How do i do a self oil change on a 1995 jeep grand cherokee


locate oil drain plug on oil pan,engine off. take out oil plug with wrench, drain oil into a big pan or similar. when oil is drained remove oil filter and put new one on, put some new oil on filter seal with finger then screw on to car as tight as you can get it by hand. do not use a fiter wrench to tighten filter only hand tight. use oil filter wrench to take off old oil filter. when filter is on put plug back in oil pan and tighten. then add your new oil to reccomended oil level.

Jul 21, 2010 | 1995 Jeep Grand Cherokee

1 Answer

How to change oil in poulan pro 650 series model hp-22 mower


Drain plug is under the motor. tip the hole machine back, (handle lying on ground) put something heavy on handle to hold it down, the plug usually is a 1/2 size wrench. Put a pan under machine to catch the oil. Take the drain plug out, drain oil, put drain plug back in, tighten it, and put machine back on all four wheels. Add oil. Take about 3/4 quarters of a quart. SAE 30 or 10w-30.

Apr 14, 2010 | Poulan Pro 22" Self Propelled High Wheel...

1 Answer

Change the oil on a 2000 Dodge Caravan


Jack up pass side.Put cardboard, BIG piece under engine just in case. Using a pan to drain the oil in put under oil pan drain plug. Remove drain plug with socket wrench. Let drain 5 min. Check the gasket on the drain plug, if bad replace with new gasket .99 cents to replace gasket only on plug. Put plug back in DO NOT OVER TIGHTEN the plug. Slide drain pan with drained oil to the front to remove oil filter. Using a filter wrench remove oil filter. Let drain. When installing new filter put a little new engine oil on the rubber gasket on the filter with your finger. Screw filter back on tighten with filter wrench. Fill van with oil from front valve cover opening.

Nov 21, 2009 | 2000 Dodge Caravan

1 Answer

What kind of oil do I use and how do I hange the oil? I have a walk behind mower model HD4QN20RF.


you use 30HD only 20 oz.. There is a drain plug under the deck in the bottom of the mower. It takes a 3/8 " ratchet and an extension. Push the handles down, Disconnect the spark plug wire, Mower the blade to one side, Take out the drain plug, put a container to collect the used oil under the mower, Put the mower back down, And it will drain the oil. Check and make sure you are getting the oil in the container. When it has drained the oil, Put the plug back in, put new oil in the mower. Hope it helps.
Good day.

Oct 17, 2009 | Garden

1 Answer

I have a 1993 Plymouth laser and have never changed oil before, but watched, not sure what to do.


Remove drain plug from oil pan to drain oil. Remove oil filter using filer wrench. Instatt new oil filter. Put oil drain plug back in. Check owner's manual for oil capacity, put all oil in minus one quart. Start engine let run for aproximately 10 seconds. put in rest of oil and check dip stick to ensure corret amont.

Oct 09, 2009 | 1993 Plymouth Laser

4 Answers

Were do you drain the oil on a 1340 evo motor


Evo's drain from the oil tank, not the engine

Apr 20, 2009 | 1996 Daelim VS 125

1 Answer

Changing oil and filter


If you have never changed your oil before use care:

0.) Safely Jack up vechile
1.) remove oil filler cap
2.) remove oil drain plug on oil pan
3.) Let oil drain into a container
4.) Flush a quart of through with the drain plug removed to get any deposits out.
5.) remove and drain oil filter
6.) install new oil filter(make sure you put some oil on the filters gasket by hand)
7.)Install oil drain plug
8.) Re-fill with oil
9.) Put oil filler cap back on

Hope this helps and again use with care if you have never turned a wrench before, people get hurt easily by being careless while working under a car.

Jun 27, 2008 | 2005 Mercedes-Benz E-Class

Not finding what you are looking for?
2004 Yamaha YZ 250 F Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...