Question about 2003 Suzuki GSX-R 1000

1 Answer

03 suzuki 1000 when turn the key 2 start both turn signal flashes want stop its not hazards please help

Posted by on

  • 3 more comments 
  • gsxr_1000915 Apr 18, 2009

    i turn on hazard they flash faster then signal

  • Anonymous Apr 18, 2009

    can u please tell me where the signal switch located 03 suzuki gsxr1000

  • blueextc3221
    blueextc3221 May 11, 2010

    then your signal switch has failed.

  • blueextc3221
    blueextc3221 May 11, 2010

    well... hate to burst your bubble - but it probably IS the hazard relay.... failed in the closed position.

  • Nathan Dingess
    Nathan Dingess Aug 31, 2016

    I'm having the same problem did the relay fix it

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 691 Answers

Alarm! immobiliser?

Posted on Jan 21, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2003 Suzuki TL1000R. It was running fine, then I stopped for gas. When I tried to start it, it would only turn over slowly, but would not fire, and the little F1 light came on. Help??


Open your rear seat and you'll see a black cap covering a connector/harness on the left side of the seat. If you take the cap off, you'll see it appears to be a normal harness. With your key in the ignition and bike turned to "on" (but not running), take a paperclip and short the two connectors out (by touching the two contacts together). This is known as a "ghetto dealer mode switch". It should display the error code on your display instead of just FI now.



Fuel Injection (FI) Code List:

C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

Jul 11, 2014 | 2003 Suzuki TL 1000 R

1 Answer

I have a 2006 Chevy Silverado 1500 Extended Cab 4x4. My question is that when the truck is parked & not running with no keys in the ignition , my brake lights will begin to flash on & off until it drains...


Stop lamp circuit discription

Stop Lamps
The STOP LP 25-amp fuse in the underhood fuse block supplies battery positive voltage to the normally open stop lamp switch. When the driver presses the brake pedal, the switch contacts close and battery positive voltage is supplied to both the STOP 15-amp fuse and the center high mounted stop lamp (CHMSL) 10-amp fuse in the instrument panel (I/P) fuse block, and to the turn signal/hazard module. The turn signal/hazard module then supplies voltage to both of the trailer rear turn/stop lamp supply voltage circuits. The voltage from the CHMSL 10-amp fuse is to the CHMSL and the trailer jumper harness. The voltage from the STOP 15-amp fuse is to the stop lamps, throttle actuator control (TAC) module, and the cruise control.

I think The turn signal/hazard module has something to do with the lights flashing .From looking at a wiring diagram B+ voltage from the STOP LP fuse 25amp in the under hood fuse box supply's the brake light switch , from there it feeds B+ to VEH STOP fuse 15amp and VEH CHMSL fuse 10amp an to stop lamp switch signal to the turn signal flasher module which is suppose to control the trailer stop lights . Do you have a connection for a trailer hook up ?
Remove both LT an RT TRLR fuse's both 10 amp from the I/P fuse block an see if the problem goes away .

Do you tow a trailer ? Check the trailer connector for corrosion !

May 15, 2017 | 2006 Chevrolet Silverado 1500 2WD

1 Answer

I have a 2004 gxsr 1000 with fault code c42. It wont start. oil light is flashing and displays FI on the temp. Bike just crank but will not fire it up. Help?


Grab a paperclip.

Place the bike in Neutral, and take the rear seat cowling off. On the side of the bike between the tail section and the trunk you will find a connector that is covered by a rubber cap, and has two wires running into it. Remove the cap and take note of which one of the 4 sockets the two wires go to. Turn the bike ON and start it up, short the wires out with the paperclip. Where your speedo was flashing a -CHEC- with the temp should now be a CXX error code. Write this code down. Then shut the bike off. Match the code up with the list below. Grab a Manual and get to work!

(What you have just done is put the bike into "Dealer Mode".

GSXR Fuel Injection (FI) Code List:

C14 - THROTTLE POSITION SENSOR
C15 - ENGINE COOLANT TEMPERATURE SENSOR
C21 - INTAKE AIR TEMPERATURE SENSOR
C22 - ATMOSPHERIC PRESSURE SENSOR
C23 - TIPOVER SENSOR
C24 - IGNITION SIGNAL #1
C25 - IGNITION SIGNAL #2
C26 - IGNITION SIGNAL #3
C27 - IGNITION SIGNAL #4
C28 - SECONDARY THROTTLE VALVE ACTUATOR
C29 - SECONDARY THROTTLE POSITION SENSOR
C30 - SECONDARY THROTTLE CONTROL UNIT
C31 - GEAR POSITION SENSOR
C32 - INJECTOR SIGNAL #1
C33 - INJECTOR SIGNAL #2
C34 - INJECTOR SIGNAL #3
C35 - INJECTOR SIGNAL #4
C41 - FUEL PUMP CONTROL SYSTEM
C42 - IGNITION SWITCH SIGNAL
C46 - EXHAUST CONTROL VALVE ACTUATOR (1000 ONLY)

03-04 GSXR1000 Workshop Manual Verify Download

Sep 26, 2012 | 2004 Suzuki GSX-R 1000

1 Answer

Rear lights not working on 2002 suzuki grand vitara


In the underdash fuse/relay box, the 15A TAIL fuse feeds power to the coil of headlight relay 2. When the combination switch is set to TAIL, the relay closes and the outer tail lamps light. In the same underdash fuse/relay box, the 20A STOP fuse feeds power to the brake light switch. When the brake pedal is pressed, the inner brake lamps light. The underdash fuse/relay box also contains the 10A TURN BACK fuse which feeds power to the hazard switch and the turn signal relay. Relay output is fed to the combination switch and turn signal power is applied to the selected middle tail light. The fourth fuse in the underdash fuse/relay box is the 15A HAZARD fuse which feeds power to the hazard switch and turn signal relay. When the hazard switch is set, the turn lamps on both sides begin flashing.

Sep 18, 2012 | 2002 Suzuki Grand Vitara

1 Answer

Hi there my suzuki grand vitara harzards have stopped working all the fuses are ok some one said to check the relay ? can any one help


there are two flasher units plugged into the fuse panel. one is for hazards the other for turn signals.
find the fuse panel by reading the owners manual, do not be surprised if it is to the left of the driver's knee. as the flashers are the same unit, just swap them, if the hazards now work but the turn signals don't you have just figured out what is bad. go buy a new flasher unit at a parts store and put it in the turn signal flasher socket. you use the signals way more than the hazards so your new one should be in the signal socket. most likely someone before you did the same thing and that is why your hazards which never get used, failed.

Dec 29, 2010 | 1999 Suzuki Grand Vitara

2 Answers

TURN SIGNAL NOT FLASHING INTERMITTENTLY


no remove lower cover only. good way to find is trun on signal and listen for clicking,hope this helps,note there are two one for signals and the other for hazards.

Oct 08, 2009 | 2003 Chevrolet Malibu

1 Answer

My 2000 saturn sl2 turn signals stopped working


HI"
onepx.gif
onepx.gif onepx.gif Vehicles: onepx.gif Make/Models: onepx.gif Model/Build Years: SATURN/LS onepx.gif 2000 onepx.gif onepxblk.gif onepx.gif Defect: onepx.gif VEHICLEDESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITHREQUIREMENTS OF FMVSS NO. 108, "LAMPS, REFLECTIVE DEVICES, ANDASSOCIATED EQUIPMENT." BECAUSE OF A PROBLEM IN THE HAZARD WARNINGSWITCH ASSEMBLY, THE TURN SIGNAL LAMPS MAY NOT WORK OR MAY WORKINTERMITTENTLY WHEN THE DRIVER USES THE TURN SIGNAL LEVER OR HAZARDWARNING SWITCH. IF THE VEHICLE TURN SIGNAL INDICATORS ARE NOT FLASHING,THEN THE TURN SIGNAL LAMPS MAY NOT BE FLASHING. onepx.gif onepxblk.gif onepx.gif Component Affected: onepx.gif EXTERIOR LIGHTING:TURN SIGNAL:SWITCH onepx.gif onepxblk.gif onepx.gif Corrective Action: onepx.gif OTHER DRIVERS MAY NOT BE ALERTED THAT THE VEHICLE IS TURNING AND A CRASH COULD OCCUR. onepx.gif onepxblk.gif onepx.gif Consequence: onepx.gif DEALERS WILL REPLACE THE HAZARD WARNING SWITCH ASSEMBLY. onepx.gif onepxblk.gif onepx.gif Mfr. Campaign #: onepx.gif 99045/00-C-03 onepx.gif onepxblk.gif onepx.gif Mfr. Involved: onepx.gif GENERAL MOTORS CORP. onepx.gif onepxblk.gif onepx.gif # Vehicles Affected: onepx.gif 1395 onepx.gif onepxblk.gif onepx.gif File Date: onepx.gif 07/29/1999 onepx.gif onepx.gif onepx.gif onepx.gif onepx.gif
onepx.gif onepx.gif The vehicle you are working on may or may not be affected by this recall. Contact the vehicle manufacturer for clarification. hope this solves your problem.THANK YOU

Sep 23, 2009 | 2000 Saturn L-Series

1 Answer

My 2003 Audi A6 has a "seizure" when put into reverse sometimes. Also, my turn signals recently started to stop working or work when they choose to (they will flash once or twice then quickly flash and...


your turn signal issue is very common even though you hazards do work they are on a different line connector in the relay that is also your turn signal relay. replace that hazard relay that should solve that problem. the c/v joints can be about 500 all the way up to almost 1000. depending on if you need the whole joint or just the boot kit. usually if you replace both joints they should swap your joints from right to left. which will make the clicking stop sometimes but if the damage is so bad that there are divots in the joint where the balls move you will need to replace both joints. and to be very honest going with after market c/v axles which allot of private shops do i have never seen one work without issues. not balanced right. as far as your transmission if you are low on transmission fluid due to an impact on your transmission pan that could cause that problem or if you have a shift solenoid going bad which can be very expensive. good luck hope that helped.

Sep 11, 2009 | 2003 Audi A6

1 Answer

Turn signals, Hazard lights


I would replace the bar switch assembly.

May 18, 2017 | 1998 Jeep Wrangler

Not finding what you are looking for?
2003 Suzuki GSX-R 1000 Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...