Question about Gilera Saturno Bialbero Motorcycles

1 Answer

I have a cpi formla r 50cc. I went to stop by letting the throttle go and braking, but the bike carried on going untill i bracked really hard. even tho the throttle was in its original place the enigine is reving and making the bike move.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Find where the throttle cable connects to the butterfly valve on your carb. Twist the throttle and see if the butterfly valve is sticking open. Your cable or the valve itself might be stuck, and needs lubed. The sell tools to shoot compressed oil into the throttle cable sleve, or start cleaning / oiling hte carb depending on what you determine is sticking.

Posted on Apr 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I make my cpi hussar 50cc 2005 go a little faster without spending money on it? (HELP)


Hi, Anonymous lets see now you want to go faster for free mmmmm you could always ride downhill only or loose some weight or remove all body and chassis molding or only ride on windy days that blow in the direction you are going for more serious information about your question that may or may not cost you a little Drachma and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
how do derestrict my cpi sm50
"Free" way to derestrict CPI SM50
How to derestrict 50cc scooter moped Make it go Faster
http://www.49ccscoot.com/manuals/CPI_GTR50_Service_Manual.pdf

Mar 31, 2016 | Cpi Motorcycles

1 Answer

Runs but cuts out when you put the revs on


Hi, Anonymous and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
For more information about your question and free downloads that you will need please visit the website below. Good luck and have a nice day.
Bike cutting out at Full Throttle 50cc Scooter
moped petrol problem
https://absolutelyscooters.net/service-manuals.html
CPI Scooter Parts Racing Planet USA
CPI Formula 50 2009

Sep 05, 2013 | 2009 Cpi Formula R 50

1 Answer

My 50cc cpi aragon 2007 model moped was running fine up untill 2 weeks ago i turned the bike off outside my house i then went out side to start it and it wouldnt start it cranks over but the coil does


may hav a bad or connect issue with coil--or magneto cud be problem--chec out entire ignition system--purchase an engine manual on that model--also library sec 629 has many vehicle books

Feb 20, 2013 | 2007 Cpi Aragon GP

1 Answer

I need to know how tight to tighten the head bolts on a CPI sm 50 cc How tight do I torque the head bolts?


Hi, Stephen sorry you can't find the first and best tool you ever bought for your CPI despair not for a mere $0 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
torque on head bolts
General Torque Spec Settings
http://www.garage24.se/Catalogs/CPI/Servicemanual/Verkstadsmanual%20CPI%20SX%20SM.pdf
CPI Scooter Parts Racing Planet USA
CPI Supermoto 2008

Jul 22, 2012 | Cpi Motorcycles

1 Answer

Hello , i have a CPI Oliver City 50cc , i have taken all the restrictions out that i no of, exhaust, nut in the belt etc .. and there is no restriction in the CDI unit ,, but the bike still can not go past...


Hi, Mitchell and the usual suspects are:
1. Throttle cables misaligned or misrouted.
2. Damaged or restricted fuel tank venting system.
3. Inlet system air leak.
4. Vacuum piston malfunction.
5. Accelerator pump leaking or no output.
6. Plugged bowl vent.
7. Fuel level in bowl too low.
8. Restricted fuel supply passages.
9. Plugged jets or passages.
10. Worn or damaged needle or needle jet.
12. The enricher valve not seated or leaking.
For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
About me and my wonderful life
How to derestrict 50cc scooter moped Make it go Faster
How to derestrict 50cc scooter
http://absolutelyscooters.net/service-manuals.html
CPI Scooter Parts Racing Planet USA

Jan 15, 2012 | 2005 Cpi Oliver 50

2 Answers

Torque settings for 2008 cpi supermoto 50


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your CPI despair not for a mere $0 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
http://absolutelyscooters.net/service-manuals.html
CPI Scooter Parts Racing Planet USA
http://www.garage24.se/Catalogs/CPI/Servicemanual/Verkstadsmanual%20CPI%20SX%20SM.pdf
CPI Supermoto 50 2005
CPI SM 50

Nov 25, 2011 | Cpi yZF 600 R Motorcycles

1 Answer

Basically I'm losing a lot of corner speed, when turning into corners. I shut the throttle off too early and it feels like I'm carrying the bike round the corner. If adjust the throttle mid bend,...


You need to accelerate very gently while you go round the corner. This sounds wrong but even if you hold the throttle in the same position, physics dictates that as you go round the corner you do actually accelerate as you go round a corner at a constant speed (velocity/direction/speed - look it up if your interested!).
So on the approach to any corner, you need to: -
1 Position yourself and the bike for the approaching bend, toward the right hand side of your lane for left hand bends and vice versa.
2 Adjust your speed to one you can quite happily ride around your bend (Slow down by easing off the throttle or appling the brakes)
3 Once at the right speed, (off the brakes) select the right gear for the speed your doing.
4 GENTLY apply some throttle to stop the bike slowing down anymore.
5 Tip the bike into the corner by gently pushing on the left bar for left handers or vice versa keeping the throttle still so that you hold your speed through the corner.
6 As the bend opens up (becomes a straight) gently apply more throttle as you release the pressure on the bar and stop turning.
If you want to keep improving your riding skills, sign up to a advanced riding course. They are for people who enjoy riding and want to be safer and consequently faster.
Good luck with your riding and enjoy!

Jul 28, 2011 | Suzuki GSX 1300 R Hayabusa Motorcycles

1 Answer

When my cpi aragon gp 50cc is started there is a rattling noisecoming fron sum where near my feet


Hi, Tiddy_09 I just loaned my brand new pair of listening ears to your local dealers chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. For more information about your issue and free downloads that you need please visit the websites below. Good luck and have nice a day.
Rattling noise coming from my scooter
GY6 rattling noise
http://www.garage24.se/Catalogs/CPI/Servicemanual/Verkstads%20manual%20CPI%20Skoter.pdf
CPI Scooter Parts Racing Planet USA
https://absolutelyscooters.net/Omanuals/CPI%20ARAGON%20125%20USER'S%20GUIDE.pdf

Jun 24, 2011 | 2009 Cpi Aragon GP 50

2 Answers

Sluggish throttle on start of the cpi sm 50cc 2006


this sounds like it has a blocked jet in the carb or the chock is not working right or maybe a low flote level

Jan 18, 2010 | 2007 Highland Supermotard

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gilera Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Fabrice Wolters

Level 2 Expert

320 Answers

Are you a Gilera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...