Question about 2003 Hyosung RX 125

1 Answer

My hyosung has stop runing it has no lights nothing is workeing at all can you tell what it can be

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

  • Is the battery 2 or more years old? It may need to be replaced. Check the fuses.
  • Before charging, add water to fill each battery cell to nearly full. Distilled water works best.
  • Use a 1amp or a 2amp battery charger
  • Is the kill switch on? Does the side stand have a kill switch? Is it working properly? Is the gas valve on?
    If no spark, then check again but with a new plug.

  • Check the operation of the ignition switch and all kill switches with a volt ohmmeter. Check the wire harness. Did a wire come unplugged? Are all wires clean and with solid connections? Any abraded or pinched wires? Is the bike in neutral and the neutral light is lit up? If no neutral light, check the neutral switch and wire connection on the center gearbox casing.

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi can a faulty celloniod stop your whole dash lights everthing stop working I have hyosung gt125r


Hi, Lee not very likely your dash lights is either a fuse or faulty wire connection for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://korider.com/index.php?topic=10605.0
Issues to look for on 2006 Hyosung GT125R
HYOSUNG GT 125 Manual
HYOSUNG COMET 125 Service Manual
HYOSUNG COMET GT125 EURO 3 CATALOGUE Manual

Jan 18, 2017 | Hyosung Motorcycles

1 Answer

We have a Samsung side by side and it just quit working. The only thing that is on is thr ice cube symbol that is flasing. The lights on the inside is also on. but nothing is runing


try unplugging count to 10 then plug back in, if this fix works you just rebooted the computer main control. located in back of fridge. then you will see 88 or something like this on display. this should be gone in 24 hrs. if not call samsung tell them what is display look like they should be able to tell you what is wrong

Sep 23, 2014 | Samsung Refrigerators

1 Answer

No power in bike


Have you checked your fuses?

Jan 18, 2013 | Hyosung GT 250 Comet Motorcycles

1 Answer

Hyosung GT125R High beams dont work, but they come on if i press the pass button


There are few solved help links,related to these types of issue.Click the link below and go through its procedure:------2004 Dodge Ram: High Beam Light is DIM? http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html
----------High beams stopped working but headlights still work? http://howtobyme.blogspot.com/2011/11/highbeams-stopped-working-but.html
---------- Working of Headlight switch? ---------

Both headlight bulbs blow together?
-------------

Car headlight bulbs don't last long?

---------These details will helpThanks.

Nov 23, 2012 | Cars & Trucks

1 Answer

Hoshizaki water dont stop runing


float switch is stuck in the "down" position. The unit goes thru a fill cycle and after 1 minute, the board "Looks" at the float swith to "see" if the sump is full. If float is stuck down, it tells the board that the unit does not have enough water and stays in the fill cycle. The compressor will not come on as long as the machine "thinks" there is not enough water. let me know if I can help further

Aug 02, 2012 | Hoshizaki Freezer Commercial Ice Machines...

1 Answer

I replaced my NGK CR8E spark plugs with the new NGK CR8EIX Iridiums on my 2009 Hyosung GV650...and immediately after starting up the bike, I heard an electrical buzz in the front of the bike and shortly...


Hi, Skjc01 before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced your OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2007 Hyosung GV650 Avitar turn signal buzzer intalled
2006 Hyosung LED Turnsignals Fix
HYOSUNG Aquil GV650 Service Manual
HYOSUNG AQUILA GV650 CATALOGUE Manual
HYOSUNG GV650 User Manual

May 01, 2017 | 2011 Hyosung GV 650 SE

2 Answers

Hyosung GT250R indicator not working


It sounds like:
1) One of the wires that takes power to the right hand turn signals is shorted to the chassis.
2) One, or both, of the right hand turn signal bulbs is burnt out.
3) The turn signal switch has failed.

Nov 18, 2009 | 2005 Hyosung GT 250

2 Answers

My 2008 hyosung gt250r doesnt start, all light and horn works. any solutions


does it crank over?....if so check spark...fuel...etc...try to narrow it down to a actual problem such as carbs clogged, or injector not working, other than wont start, not able to tell much from that.

Sep 11, 2009 | 2005 Hyosung GT 250

1 Answer

My hyosung 125 gtr just stop and nothing works no lights nothing


check the fuse of the battery coz it's a battery operated.

Apr 15, 2009 | 2003 Hyosung RX 125

Not finding what you are looking for?
2003 Hyosung RX 125 Logo

319 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...