Question about 2000 Yamaha DT 125 R

2 Answers

How much oil is a 1995 dt 200 surpose 2 have in the eingine well gear case

Posted by on

  • Lee
    Lee May 11, 2010

    it should be imprinted on the casing by the filler cap


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Hi on the viewing window there should be a halve way line,i tend not to fill it rite up as it can damage the clutch,fill it up to the halve way line,if it has a dipstick fill un till it reads halve way.hope this helps

Posted on Aug 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I have a 1995 half way point on the sight glass indicates it needs about 400ml...the total for the bike is 800-850ml i perfect fill in about a millimeter from the top of the sight glass you want to see about a mm of clear glass,otherwise over filling can damage the clutch
hope this helps

Posted on Nov 13, 2012

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fork oil quantity dt 200

Hi, Anonymous sorry you can't find the first and best tool you ever bought for your Yamaha despair, not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Dt200 Fork Oil Yamaha 2 Stroke
DT 200 forks help dbw dirtbikeworld net Members Forums
OEM parts for Yamaha
Yamaha DT200R 1991

Apr 05, 2014 | 2004 Yamaha DT 125 R

1 Answer

How much oil should go in a wr200 94 gear box

Hi, Allaspexs for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha DT 200 WR 3XP 90 94
How To Change Oil On 2 Stroke Motorcycle ATV
yamaha wr200 service manual 1992 Download Manuals Technical $10
OEM parts for Yamaha

Jul 22, 2011 | 2003 Yamaha WR 250 F

1 Answer

I have a dt 125 what kin of engine oil do i put in

2 stroke engine oil for the engine goes in the oil tank under the seat.
motorcycle gear box oil goes in the gearbox, car oil may cause the clutch to slip.

May 01, 2011 | Yamaha DT 125 X Motorcycles

2 Answers

Engine oil just disapears but no external leakage

DT yamaha,s are a 2 stroke, the oil is pumped into the engine and burnt with the fuel, at aproximately 30-1 ie: every 30 litres of fuel will burn 1 litre of oil, this is how the engine gets its lubrication , without it the engine will be destroyed, they also have gearbox oil which only lubes the gears and clutch

Apr 19, 2011 | 2000 Yamaha DT 125 R

1 Answer

Need to know how many pints the tranfer case uses and the best kind to use for 1998 jeep cherokee

I cannot help you with quantities, but I expect it to be no less than 1 gallon.
Therefore purchase at least 4 QTS. of Heavy Duty EP 80/90 Gear Oil.
I suggest this due to age of vehicle, also as you consider a Transfer gear oil change, you change the Differential as well.
For this also, an EP 80/90 is adequate. The joice of Mineral Oil or Synthetic is yours.
Regards, DT

Mar 15, 2011 | Jeep Grand Cherokee Cars & Trucks

1 Answer

When driving down the road my 95 neon 2.0 sohc had stalled out and when i got it to restart i got up to about 55 mph and it felt like the transmission just went into nuetral dont do it all the time but has...

Check the Transmission Dipstick OIL level to ensure the level is up to the FULL mark. A low oil level will be insufficient to keep the drive engaged as the system gets hot, and will eventually damage the internal gearing, and also the seals.
Regards, DT

Feb 15, 2011 | 1995 Dodge Neon

1 Answer

What type of oil do i need for a 1995 chevy silverado transfer case also if you know what gear oil should i use for the front and rear axles

The transfer case uses two types of oil one is automatic fluid the front part of differential takes gear oil 85/120 wt. both differentials I would use synthetic oil and would run 85/120 however if the rig has been well used you might want to go with a higher weight oil oil so you don't get wheel seal leaks.

Apr 17, 2010 | 1995 Chevrolet K1500

2 Answers

What oil do i add (gear or engine oil) to a 1987 yamaha dt 175 and what grade

hi,most two strokes run a gear oil in the gearbox,unless specified by the manufacturer dont use engine oil as it is not heavy enough,i use a 75w gear oil in my nsr 250 and it works fine..cheers

Mar 06, 2010 | 2005 Yamaha DT 125 X

2 Answers

My YAMAHA DT 200R does not work since the oil pump does not pump the oil to the piston.I do not know why? Could anyone please help me on solving this problem?

Clean out the oil tank
Clean out the oil hoses ( all )
Check the command cable of the oil pump

Refill the oil tank and bleed the oil pump ( a small bleeder screw is at the top of the pump )
Fill your fuel tank with a 50/1 fuel oil mix.
Run the bike on idle.
Remove the oil pump outlet hose, pull at the oilpump command cable all the way ( to max flow ) check oil comes out of the pump.
If not, replace the pump.
If it does, reconnect the outlet hose and see the oil advances in the hose.

Oct 26, 2009 | 2004 Yamaha DT 125 R

1 Answer


not sure if u have tried this my friend,, but on the fly wheel side of the bike,, or left of the bike as u r sat on it,,is the casing covering the fly wheel,, on that casing u will see a screw ,ie looks like a nut ,, undo that to reveal in the hole a little bit of the fly wheel,, shine a torch down it and turn the engine over by hand or put it gear and rock it ,so the fly wheel turns eventually u will see a tdc mark or line engraved on the wheel,, ,,in the hole u r lookin down will be a pointer or small arrow on the casing,, line the to up ,,and then take the spark plug out and just lightly put a screw driver down the hole of the cylinder, it should be at the top of its stroke,,turn the engine over once to make sure the piston is as top dead centre,and the mark on fly wheel line up,, if u r using a strobe light it will be 10% b4 top dead centre.. any probs ,,e mail me, 4 the other solution,,

Dec 20, 2008 | 2006 Yamaha DT 125 X

Not finding what you are looking for?

Open Questions:

See all 2000 Yamaha DT 125 R Questions

2000 Yamaha DT 125 R Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts


Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers


Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides