Question about 2000 Yamaha YZF-R6

1 Answer

2000 yamaha r6

Struggles to start, misfiring, stalling.

Posted by on

  • Lee
    Lee May 11, 2010

    is this just out of winter storage? sounds like fuel problem

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 33 Answers

This sounds like it could be any of 3 things. Ignition system, Air system & fuel system. Most commonly you'll find that the carburettors just need to be cleaned as this problem sounds related.

I would suggest thoroughly cleaning the carburettors as a good starting point. Along the way though I would also check the battery, the fuel tap and filter, the air filter and air ducts. As any of these components are blocked, will cause a similiar symptom. You should find it run better afterwards, if not I can help moving on to check the next possible cause. If you need help of how to get to the carbs and how to clean them, let me know.

Posted on May 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bike stalls at stops


Hi, Anonymous and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/91441-bike-stalling-when-i-stop-wont-stay-idle.html
2007 2008 Yamaha R1 Stalling Problem Fix How to
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jan 08, 2014 | 2000 Yamaha YZF-R6

1 Answer

Won't start


Hi, Anonymous and the usual suspects are:
1. Idle circuit and transfer ports clogged.
2. Air fuel mixture adjustment too lean.
3. Pilot jet clogged.
4. Faulty accelerator pump.
5. Float level too low.
6. Float bowl contaminated old fuel, water, dirt, rust, etc.
7. Float bowl vent or overflow tube clogged.
8. Fuel flow to carburetor restricted.
9. Intake manifold leak.
10. The gas cap is not venting properly or fuel tank venting system blocked.
11. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
12. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r6messagenet.com/forums/r6-maintenance-technical/117461-wont-start-without-throttle.html
http://www.r6-forum.com/forums/57-garage-mechanical-help/142147-2000-r6-wont-idle.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jan 08, 2014 | 1999 Yamaha YZF-R6

1 Answer

J515e 020665


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/51-how-tos/111536-engine-number.html
http://www.thisoldtractor.com/mg_manuals/book_motorcycle_identification.pdf
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Sep 23, 2013 | 2000 Yamaha YZF-R6

1 Answer

Yamahar6 secondary injectors code show 40


Not sure what your talking about - 2000 R6's had carb's. The first year for a fuel injected R6 was 2003.

Feb 13, 2013 | 2000 Yamaha YZF-R6

1 Answer

Vacuum line routing Yamaha 2000 r6


Hi, Judy for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/155340-fuel-delivery-vacuum-line-routing-questions.html
Vacuum line routing Yamaha 2000 r6 Google Search
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 30, 2010 | 2000 Yamaha YZF-R6

1 Answer

Struggles to start. misfires when running. idle surges. all coils ohmed out within specs. pickup coil is also good. tps good.


Could possibly be a pulse sensor which is found on the timing cover. If that is ok and the rest of the CDI ignition is ok, then more than likely you're looking at the carbs which would need to removed, drained and thoroughly cleaned!

Apr 15, 2009 | 2000 Yamaha YZF-R6

1 Answer

My neutral light and speedometer wil not work on my 2000 yamaha r6 there is power too the clock but just reads zero please help


Hi, Lukemc for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
R6 neutral light Didn start after attempted theft
http://www.r6messagenet.com/forums/r6-maintenance-technical/47630-speedo-tach-not-working-help.html
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Mar 26, 2009 | 2000 Yamaha YZF-R6

Not finding what you are looking for?
2000 Yamaha YZF-R6 Logo

Related Topics:

304 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...