Question about Skyteam ST 125-3 Motorcycles

1 Answer

Hi i recently bought a kaiser 125cc and it was working great for first few weeks. But now when i change to 2nd gear or above it stalls or loses revs(power). Also clutch is squeaking whilst driving. Is there a way to adjust it? Thanks

Posted by on

  • billy280881 Apr 15, 2009

    Thanks very much ill try and use that solution today and let ya know how i get on. Cheers Mate



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Install a new stock NGK spark plug and remove the carburetor from the engine.

Remove the float bowl and clean the entire carb with a spray carb cleaner from the auto parts store. Wear protective goggles to avoid getting spray in your eyes. Spray into all the little airways and fittings in the carb. Remove the two screws on the outside throat of the carb and spray into the screw holes as well.
Be sure to put these two screws back in the same hole they came out of. IMPORTANT > do not tighten these two screws down. Only screw these in until they LIGHTLY seat. Now turn each screw one and one half turns outward. Put the rest of the
carb back together, clean the air filter and then install the carb. Before putting the slide back into the carb, move the clip on the jet needle one notch lower than where it is now. Let the float bowl fill then start the engine. This process should get you back on the road.

Posted on Apr 14, 2009

  • tombones Apr 14, 2009

    I forgot to answer the clutch question. I am unfamiliar with Kaiser brand but from the photo I found it looks to be a four stroke with a wet multi-plate clutch. Chances are you had best put some oil in the gearbox. 10w40 motor oil is what it takes. That should eliminate the squeak and lubricate the rest of the motor as well. :)

    Please rate this answer. Thanks Billy280881!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Ajs eos 125cc

Bought it today??? this is simple ... take it back ... get resolved or get your $ back. If you mess with it ... all bets are OFF - dealer or individual.

Aug 22, 2013 | 2011 AJS Eos 125 Mk2

1 Answer

2006 Chevy Cobalt Tranny issues (automatic) no 4th gear!

I had the same problem but eventually lost reverse. Had to get a new transmission... $2,300.00

Sep 22, 2009 | Chevrolet Cobalt Cars & Trucks

1 Answer

Found a jeep with a identification tag on the rt firewall that reads Kaiser jeep corporation, toledo, ohio, serial # 3305 173918. would like to find the make and models of this old jeep. any help is...

Willys Overland merged with Kaiser and became Kaiser Jeep Corporation in 1963; AM Motors Corporation bought Kaiser in 1970. There is some interesting info at

Sep 06, 2009 | 1983 Jeep CJ5

1 Answer

Honda auto gearbox problem

worn shift fork. shifts linkage could be binding.

Mar 29, 2009 | 2000 Honda Accord

1 Answer

1990 f150 wont shift from 1st to 2nd

Well where to start. First of all you listed that the transmission won't shift from 1st to 2nd gear. This could be any number of things from internal oil leaks, bad sensors, valves, clutches and so on and so on. The problem is there is no way of telling you this is the problem or that is the problem with out performing tests such as taking pressure readings, stall tests and so on. Then we get to your description, having gears slam can also be caused by all the items listed above with the first issue. Losing all gears completely (I assume drive, overdrive, reverse, etc.) leads me to believe you have a major internal leak (assuming there isn't oil pouring onto the ground), a issue with the transmission pump or torque converter. Again there isn't anything you can do without taking pressure readings. And even with those readings you won't really know what your looking for without a complete understanding of how a automatic transmission works. Sorry I couldn't give you a straight forward easy answer. I would recommend taking your truck (assuming it will drive) to a shop that specializes in transmissions. I recommend a transmission shop because to me dealership labor rates are to high, and secondly I wouldn't take it to a general independent shop because you don't know if it will be an experienced transmission technician working on it or a "grease monkey" who will sell you things it dosen't need because he's just guessing what wrong with it.

Mar 25, 2009 | 1990 Ford F150

1 Answer

I have an aemi automatic ford fiesta, recently is has stalled several times when I have started the car in the morning, also it seems to have difficulty changing from 1st to 2nd gear in automatic what is...


It seems that the automatic choke may have given up which will cause it to stall when cold, could also cause the problems with the gear change as it won't produce enough pressure for the auto system, unless this happens when it's not cold as well.


Aug 01, 2008 | Ford Focus Cars & Trucks

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

852 people viewed this question

Ask a Question

Usually answered in minutes!

Top Skyteam Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

41871 Answers


Level 3 Expert

76164 Answers

Are you a Skyteam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides