Question about 2004 Yamaha YZ 125

1 Answer

Shifting Trouble Hi, I just bough a YZ 125 2005, and my shifter is kind of hard to get into the gears. What's up with that

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

You have a bent shift fork. The repair means taking the engine out of the frame then removing the top end, removing the flywheel and electrics, removing the clutch , shift mechanism and kick starter and a few other parts. THEN you are ready to split the gearbox to remove the crankshaft and then the bent shift fork. Next you get to put it all back together. This is a pretty big job for the home mechanic.

You will need an impact driver, flywheel puller, case splitter and torque wrench plus the normal screwdriver, pliers, etc.. Alternate to the special tools is taking it to the dealer and say "Fix it".
I normally tell people to take it to the shop just so they don't get into such an involved project.

Please rate this solution. Thanks

Posted on Apr 13, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Honda GL 1500 SE Gold Wing hard to shift


Hi, Ricky and the usual suspects are:
1. Clutch not adjusted properly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. A loose shift lever on shifter shaft.
7. Shifter forks sprung.
8. Shifter pawl needs adjusting.
9. Heel/toe shifter coming in contact with the floorboard.
10. Transmission oil too heavy.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Hard to shift gears GL1500 Information Questions goldwingdocs com
GL1500 shifting issues
Honda GL1500 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda GOLDWING GL1500 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 31, 2017 | 2000 Honda GL 1500 SE Gold Wing

1 Answer

Problem of hard gear shifting in pulsar 135


Hi, Saurabh and the usual suspects are:
1. Clutch not adjusted properly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. A loose shift lever on shifter shaft.
7. Shifter forks sprung.
8. Shifter pawl needs adjusting.
9. Heel/toe shifter coming in contact with the floorboard.
10. Transmission oil too heavy.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Gear Shifting is Very Hard
https://www.complaintboard.in/complaints-reviews/bajaj-pulsar-135-cc-bike-l108991.html
http://shahriary.staffcms.um.ac.ir/imagesm/1064/My_Pic/pulsar135lsspc.pdf
Bajaj Electricals Pulsar 135 LS User Manual
Bajaj Pulsar 180 DTSi Workshop Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 10, 2017 | Bajaj Pulsar 150 Motorcycles

1 Answer

Why does it have trouble shifting into 3rd gear?


Hi, Joe and the usual suspects are:
1. Clutch dragging slightly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. Shifter forks sprung.
7. Transmission oil too heavy.
Good luck and have a nice day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 16, 2015 | Motorcycles

1 Answer

1976 yamaha yz 125 not shifting properly.not staying in gear


If it does stay in gear when barely throttled but does not stay in while under load, the engagement dogs on the gears(inside the engine) are bad and the engine will need to come apart to repair it.

Nov 17, 2014 | 2003 Yamaha YZ 125

1 Answer

Shifter wont shift


Hi, Anonymous and the usual suspects are:
1. Clutch not disengaging.
2. Bent shift shaft.
3. Shift fork bent or seized.
4. Gear seized on the shaft.
5. Gear positioning lever binding.
6. Shift return spring weak or broken.
7. Shift return spring pin loose
8. Shift mechanism arm spring is broken.
9. Shift mechanism arm is broken.
10. Shift drum is broken.
For more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
yz85 transmission not shifting after bottom end rebuild Yamaha 2 Stroke
Dirt Rider Magazine
YAMAHA YZ85 LC Owner Service Manual
OEM parts for Yamaha
YAMAHA YZ85 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jan 18, 2014 | 2004 Yamaha YZ 85

1 Answer

1998 Kawasaki VN 1500 Vulcan Classic transmission shifts hard in first gear


Hi, Catalin and the usual suspects are:
1. Clutch not adjusted properly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. A loose shift lever on shifter shaft.
7. Shifter forks sprung.
8. Shifter pawl needs adjusting.
9. Heel/toe shifter coming in contact with the floorboard.
10. Transmission oil too heavy.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.kawasakimotorcycle.org/forum/mechanics-corner/4833-1997-vulcan-classic-1500-shifting-problem.html
hard shift first to second Kawasaki Vulcan Forum Vulcan Forums http://www.vulcansabs.com/wp-content/uploads/2016/04/Kawasaki-Vulcan-VN1500-Nomad-Classic-Tourer-1998-1999-Service-Manual.pdf
OEM Parts for Kawasaki
1998 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 25, 2013 | 1998 kawasaki VN 1500 Vulcan Classic

1 Answer

Pulsar 220 gear shift problem


Hi, Deepak and the usual suspects are:
1. Clutch dragging slightly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. Shifter forks sprung.
7. Transmission oil too heavy.
For more information about your issue, please visit the websites below. Good luck and have a nice day.
DOWNLOAD Bajaj Pulsar 180

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Nov 12, 2013 | 2011 Bajaj Pulsar 180

1 Answer

HARD SHIFTING 06 VTX HONDA 1300R


Hi, Anonymous and the usual suspects are:
1. Clutch not adjusted properly.
2. Primary chaincase overfilled with lubricant.
3. Corners wore off shifter clutch dogs.
4. Shifter return spring bent or broken.
5. Bent shifter rod.
6. A loose shift lever on shifter shaft.
7. Shifter forks sprung.
8. Shifter pawl needs adjusting.
9. Heel/toe shifter coming in contact with the floorboard.
10. Transmission oil too heavy.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Transmission shifts loud and hard
TX 1300 shifting hard
Honda VTX1300S Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda 2007 VTX1300S Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 21, 2013 | 2006 Honda VTX 1300 S

1 Answer

03 YZ 250 won't shift into 3rd


You have a bent shift fork. The repair means removing the engine from the frame then tearing it down into about 75 parts which will then allow the bent shift fork to be replaced. This is not a job for the amature mechanic. Wish I were there with you to guide the repair.

Mar 09, 2009 | 2003 Yamaha YZ 250

1 Answer

'99 wrangler has trouble shifting to 2nd gear - 4th gear occasionally slips to neutral


If you can see where the shifter goes through the floorboard, make sure the shifter is not hitting the floor.
There could be interfierence under the car also.

Oct 24, 2008 | 1999 Jeep Wrangler

Not finding what you are looking for?
2004 Yamaha YZ 125 Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Tom

Level 2 Expert

314 Answers

vince

Level 3 Expert

1216 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...