Question about 2001 Suzuki Burgman 250
When warm cuts out at junctions and will not restart untill totally cold again. Flattens battery and had to leave bike yesterday because of this. Tried adjusting the tickover screw but does not make any difference. CAN ANYONE HELP ME PLEASE
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Probably a bent shift fork. Not good news. Sorry.
Call the Burgman dealer And tell them what I said. See if they agree with my answer.
Then, please rate this answer. Thanks!
Posted on Mar 28, 2009
SOURCE: burgman 250 will not start
Ck fuses and wire connections first. If no problem seen, get bike running and disconnect the ground cable @ battery. If bike dies the problem generally is in the stator or regulator assembly not keeping battery charged. Bike will run untill the battery is too low to keep the ignition system energized and the bike will die. If it continues running w/the ground disconnected, the battery could have a dead cell which will drain the battery in a very short time whether it is running or not.
Posted on May 03, 2009
your bike is probably due to have the carburetor cleaned and reset,as your bike is still reasonably new all the parts are starting to settle in and will need adjusting to bring it back to factory specification,hope this helps
Posted on Jul 06, 2009
Tips for a great answer:
Apr 08, 2014 | Honda Varadero 125 Motorcycles
Aug 22, 2013 | Triumph Motorcycles
Feb 27, 2012 | Daihatsu Charade Cars & Trucks
Jun 27, 2011 | 2006 Honda VTX 1300 S
Oct 27, 2010 | Yamaha YZ 250 F Motorcycles
Apr 13, 2010 | 2000 Mitsubishi Galant
Apr 24, 2009 | 2003 Suzuki UH 125 Burgman
235 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: