Question about 1986 Yamaha XJ 700 S Maxim

1 Answer

How to set headlight aim on xj 900s diversion where is the adjuster to drop the beam lower down??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 353 Answers

I think there is a slot under and behind the light casing

Posted on Jun 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is indicator fuses on xj diversion 900s 1988


Hi, Ian for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
1988 xj diversion 900s turn signal fuse location Google Search
Wiring Diagram Schematic for XJ600 1989 needed
http://inetdni.home.xs4all.nl/motor/manualxj900s.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xj-owners-manuals

Mar 29, 2015 | Yamaha Motorcycles

1 Answer

How do i adjust headlight aim on nissan note


On the back of each headlight there are two adjusting screws, one will control the up and down the other controls left and right. To get the aim approx right without the optical set. Make sure the car is sat level, tyres at correct pressure, no heavy weight in the trunk. Drive the car up to a wall or garage door and with a piece of chalk/marker pen make a cross level with the centre of the headlight. Now move the car straight back approx six feet, switch headlights on main beam, the beam should centre on the cross, switch to low beam and the beam should move to the left and down by about 5cm

fca5e1f5-0584-406d-bd08-9f21451573c7.gif

Jan 01, 2014 | Cars & Trucks

1 Answer

Just bought a used 05 subaru impreza. Noticed the right head lamp is pointed too high. where is the adjustment screws to lower the lamp. It seems great on the horizontal just needs to be adjusted on the...


I hope this info helps!

ADJUSTMENT

HEADLIGHT AIMING

CAUTION: Turn off the light before adjusting headlight aiming. If the light is necessary to check aiming, do not turn on for more than 2 minutes.


  1. Before checking the headlight aiming, be sure of the following:
    • The area around the headlight has not sustained any accident, damage or other type of deformation.
    • Vehicle is parked on level ground.
    • The inflation pressure of tires is correct.
    • Vehicles gas tank is fully charged.
    • Bounce the vehicle several times to normalize the suspension.
    • Make certain that someone is seated in the driver s seat. Turn the headlights on and then adjust the low beam pattern to the following positions on the screen.
  1. Position the headlight beam leveler switch to "0" .
129148368


129148369


129148370



  1. Rotate the adjusting screw (A) to adjust aim.

Aug 01, 2011 | Subaru Impreza Cars & Trucks

1 Answer

I need the location of the adjustments for the lower beam on a 2007 Kia Optima. The manual shows one, and it IS labeled lower beam in the book, but that adjustment moves the high beam.


there is a bolt on the back of the housing, 8 or 10mm that adjusts the low beam up and down. I hated the aiming of the low beam headlights too

Oct 17, 2010 | 2007 Kia Optima

5 Answers

How do i adjust my headlingt on a 2001 suzuki xl7


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Nov 14, 2009 | 2001 Suzuki Xl 7

1 Answer

Adjust the headlight beam on 2002 Subaru Outback


two screws on each headlight control the direction the headlights are aimed. One screw, usually at the top but sometimes below the headlight, adjusts the headlight up and down. The other screw, located to one side, controls the headlight from right to left. Turning the appropriate screw one direction or the other will change the direction the headlight points.
In order to aim your headlights you need to have a flat vertical surface you can aim your headlights at in front of a level surface on which to park the car. If your driveway is level your garage door is the perfect place to aim your headlights.
The tools you will need for this job are simple. Masking tape is used to mark where the headlights are to be aimed and a screwdriver is needed to adjust the headlights. A tape measure will be necessary to measure the distance of the vehicle to the surface you're using to check the aim and to measure the up and down distances from your marks

Nov 09, 2009 | 2002 Subaru Outback

1 Answer

High beam adjustment, how do you do it seams mine are reaching for the stars thaks john in wisconsin


two screws on each headlight control the direction the headlights are aimed. One screw, usually at the top but sometimes below the headlight, adjusts the headlight up and down. The other screw, located to one side, controls the headlight from right to left. Turning the appropriate screw one direction or the other will change the direction the headlight points.
In order to aim your headlights you need to have a flat vertical surface you can aim your headlights at in front of a level surface on which to park the car. If your driveway is level your garage door is the perfect place to aim your headlights.
The tools you will need for this job are simple. Masking tape is used to mark where the headlights are to be aimed and a screwdriver is needed to adjust the headlights. A tape measure will be necessary to measure the distance of the vehicle to the surface you're using to check the aim and to measure the up and down distances from your marks.
To start you will want to pull your car quite close to the surface you are using to aim your headlights. This is done to allow you to mark, with the masking tape, where the headlights are on the car. With the car right up against the vertical surface, and your low beam headlights on, the center of the beams will be directly in front of the headlights. Use your masking tape to mark straight across where the headlights are shining. Use short pieces of masking tape to mark vertically the center of the low beams.
, back your car about 25 feet away to check the alignment of the headlights. The brightest spot on your low beams should be about two inches below the masking tape and slightly to the right of the vertical marks. Use the adjustment screws to move the beams up and down, and right and left, until the headlights are aimed properly.
If your car only has two headlights, that's all you need to do. With the high beam lights integrated into the single headlight there is no further adjustment possible. If you have a four-headlight system you will next need to adjust your high beams. Switch to your high beams and adjust them so they shine just below the line and are centered between your two vertical marks.

good luck

Nov 05, 2009 | Volkswagen Jetta Cars & Trucks

1 Answer

Aim hid headlights


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 09, 2009 | 2007 Mazda 3

1 Answer

How to adjust headlight down


on the back of the headlight to one side thre will either be a twist nob so to speak or a hex/srew head that you wind in or out to adjust the aim. have someone else sat astride the bike with it pointing towards a wall (about six to eightfeet away) with the headlight on and turn it one way you will notice the headlight beam move up or down, turn it according to how far you need it to go.

Aug 18, 2009 | 2002 Yamaha XJ 900 S Diversion

2 Answers

How do you aim headlights


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Aug 11, 2009 | 2004 Suzuki Forenza

Not finding what you are looking for?
1986 Yamaha XJ 700 S Maxim Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...