Question about 2001 BMW R 1150 GS

1 Answer

Abs lights flashing immediately after pulling away

I am able to reset abs, but keep losing iti have fitted a new battery.i am worried the pump needs re placing
your help would be appreciated . thanks . steve

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

This happend to me when I put the new battery on, I held down the abs button for over 10 second, drove down the road and did not reset but when I turned the bike of then back on again it was cured

Posted on Jul 10, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the engine light not only on, but flashing on my 2ltr petrol 2001 vw beetle, and the car is jolting even when idle (feels like it will stall), and it stinks like a firework???


Your light is flashing because it is telling you it needs attention right away. Get the codes pulled and fix the problem. Sounds like a emissions. Sensor problem or a blocked up catalytic converter.

Apr 16, 2017 | 2005 Ford F 350 Super Duty

1 Answer

My abs light came on and the hydraulic pump stays on even though the car is turned off


Replace the ABS pump relay first. You have not provided any specific info on make model of vehicle. If you need more help please post this info.

Mar 16, 2012 | Cars & Trucks

1 Answer

ENGINE MANAGE LIGHT IS ON ALSO ABS LIGHT IS ON WHEN ENGINE IS RUNNING ARE THESE 2 LIGHTS LINKED. BECUSE I HAVE HAD THE REPAIR DONE ON THE MANAGEMENT SIDE BUT THEY TELL ME THE LIGHT WILL NOT GO OUT UNTIL I...


If it's a 2.5 or 3.0 then probably a rear ABS sensor ring will have broken. You need a new CV joint for whichever side it is (not the complete half-shaft, despite what a garage/dealer may tell you). Cost is around £90 for parts, £70 for labour. The car can be driven in the meantime but ABS will not work and you may lose cruise control and even the speedo until it is fixed.

The engine light needs 3 complete cold-hot-cold engine cycles before it will reset itself, although a decent OBD II code reader can reset it immediately.

Aug 10, 2010 | 2002 Jaguar X-Type

1 Answer

Antilock brake module keep enegizing causing the battery to lose it's charge


Have the ABS system checked out by a repair shop. Chances are you need a new pump ,ABS module or relay.

Mar 30, 2010 | 1998 Ford Expedition

1 Answer

Battery goes dead after several days, have tried


Connect the meter, then pull fuses one at a time until the current draw goes away.

You have now isolated the circuit that is the culprit. Troubleshoot that circuit and you'll find what is causing the problem. I would suspect there is a light staying on somewhere (engine light) or possibly ABS pump (if truck has ABS brakes). Maybe dash lights are on all the time.

Let me know what you find, or if you need more help.

Dec 14, 2009 | 2002 GMC Sierra C/K1500

1 Answer

Peugeot 306 ABS light is on constantly.


if it help, having the abs light on in your vehicle just means that the abs system has a fault. normaly the abs sensor on one of the wheels are abd in 85% of all vehicles. if you are worried about driving the car, no worries, it is still safe to drive and you will NOT lose your brakes. your brakes are manual and the abs is electrical. i would say take your car to a dealership and have them rub a diagnostic test on your abs. they will be able to help you more then a regular garage will. most dont have the ability to check abs systems

Nov 28, 2009 | 2005 Peugeot 405

2 Answers

Tire pressure, ABS, and red warning light keep going on while the temp gauge jumps to max (and immediately goes back down again. Tires seem pumped up and the brakes are working fine, not sure what the...


It's your ABS pump! The same happened me, all the light you mention came up on my dashboard aswel and within a few days the car would not start for me.. Thought it was a dead battery so I hooked up the jump leads to the battery and smoke started coming from the wires out of the ABS pump! Take a look at your pump (its located just in front of the passenger seat at the back of the engine) and look down at the wires to see if they have melted.. You might be lucky and just have to get the wires replaced but if you are like me you will be unlucky and need to get the ABS pump replaced at a cost of €600 to buy (UK price) plus €80 to fit not to mention other labour etc... Make sure you go to an auto electrical guy as a regular mechanic won't have a clue! Stay away from main dealer, w@ankers!!

Nov 23, 2009 | 2002 Mini Cooper

1 Answer

Anti lock brake lights flashing simultaneously


I would check the brake pads first to see if they are worn badly, spent a lot time once learning that will cause ABS lights to flash!
Grounding the middle pin on the ABS diagnostic plug , turn on the ignition and mash both brakes to see if the bulb checker light goes out! Very important, left out of procedure on IBMWR, if the red bulb checker light doesn't go out you have a blown tail light or stop light bulb and the ABS won't reset!
Or you have a bad bulb checker module underneath the seat. If the red light goes out then the ABS lights should go to flashing then push the ABS reset button and hold for slow count of 10 or so. Release and try it. Hope this helps!

Apr 07, 2009 | 1992 BMW K 75 S

3 Answers

ABS light flashs - push switch and it stays on completley


it is caused by low battery voltage run bike for about a mile then stop turn of turn back on wait till abs lights go out then start

Jan 25, 2009 | 1998 BMW R 1100 RS

Not finding what you are looking for?
2001 BMW R 1150 GS Logo

236 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

phil cuzins
phil cuzins

Level 2 Expert

79 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...