Question about Aprilia Motorcycles

1 Answer

Speed sensor,lamda sonda,tp sensor short to ground

Speed sensor,tp sensor short to ground

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Aprilia Master
  • 43,124 Answers

Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix/test or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.

Posted on Oct 26, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dodge caravan 2003 code p1598 and p0123


code p 1598 is a/c pressure sensor--volts to high
code p0123 refers to throttle position(TP) sensor A/ accelerator pedal position (APP) sensor A---high input===causes wiring short to positive--TP/APP sensor---ECM
it also refers to TP sensor A APP switch A--low input====causes --wiring short to ground--Tp/APP switch---ECM

Jan 19, 2017 | Dodge Caravan Cars & Trucks

1 Answer

4x4 4.0l V6. What are the probable causes of DTCs P0112, P0117, P0122, P0513, P0556, and P0565?


code p 0112 refers to intake air temp (IAT) sensor --circuit malfunction===cause --wiring short to graound--wiring short to positive --IAT sensor ---ECM
code p 0117 refers to engine coolant temp (ECT) sensor--circuit malfunction=== causes --coolant thermostat---wiring short to ground--wiring short to positive ---ECT sensor
code p 0122 refers to throttle position (TP) sensor A/ accelerator pedal position (APP) sensor A low input === causes wiring short to ground--TP/APP sensor --ECM
There are 3 responses to p 0122 and all refer to TP switch /sensor plus wiring open /short to ground/ short to positive
code p 0513 refers to incorrect immobilizer key=== causes immobilizer system
code p 0556 refers to brake booster pressure sensor---circuit range / performance=== causes --wiring---poor connection---brake booster pressure sensor---ECM
code p 0565 refers to cruise control master switch. off signal --malfunction === causes wiring---cruise control master switch--ECM
by reading all the codes you will see that common causes are wiring problems and ECM so may be a quick check would be to replace the ECM with a known working unit first and work back from there

Feb 23, 2016 | 1994 Ford Ranger Supercab

3 Answers

Engine runs rough and stalls sets a p0068 code on a 05 dodge durango


P0068-MAMFQLD PRESSURE/THROTTLE POSITION CORRELATION
' Image
Theory of Operation
This DTC sets when an unexpected high intake manifold air flow condition exists that
can lead to increased engine speed and puts the NGC into a High Air flow Protection
limiting mode. The High Air flow Protection feature includes RPM limits for when a
Throttle and or MAP sensor limp-in fault is present.
When Monitored
During all drive modes.
Set Condition
If vacuum drops below 1.5Hg with engine RPM greater than 2000 RPM and closed
throttle. One Trip Fault. Three good trips to turn off the MIL.
Possible Causes
-VACUUM LEAK
-RESISTANCE IN THE (FS56) 5-VOLT SUPPLY CIRCUIT
-(FS56) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
-RESISTANCE IN THE (Kl) MAP SIGNAL CIRCUIT
-(Kl) MAP SIGNAL CIRCUIT SHORTED TO GROUND
-RESISTANCE IN THE (FS55) 5-VOLT SUPPLY CIRCUIT
-(FS55) 5-VOLT SUPPLY CIRCUIT SHORTED TO GROUND
-RESISTANCE IN THE (K22) TP SENSOR NO. 1 SIGNAL CIRCUIT
-(K22) TP SENSOR NO. 1 SIGNAL CIRCUIT SHORTED TO GROUND
-RESISTANCE IN THE (K900) SENSOR GROUND CIRCUIT
-MAP SENSOR
-THROTTLE POSITION SENSOR
-PCM
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.
25312083-mkm0xbqveb5zta3uncrswycs-5-0.png Auto Repair Help US 25312083-mkm0xbqveb5zta3uncrswycs-5-2.jpg

Dec 07, 2014 | Dodge Cars & Trucks

1 Answer

What dose it mean when engin light falshes contstantly


Flashing Diag Code P0122
TP circuit low input
DETECTION CONDITION
• If PCM detects TP sensor voltage at PCM terminal 89 below 0.10 V after engine start, PCM determines
that TP circuit has a malfunction.
POSSIBLE CAUSE
• TP sensor malfunction
• Connector or terminal malfunction
• Open circuit between TP sensor terminal C and PCM terminal 89
• Short to ground circuit between TP sensor terminal C and PCM terminal 89
• Open circuit between TP sensor terminal A and PCM terminal 90
• Short to ground circuit between TP sensor terminal A and PCM terminal 90
• PCM malfunction

Flashing Diag Code P0123
TP circuit high input

DETECTION CONDITION
• If PCM detects TP sensor voltage at PCM terminal 89 is above 4.77 V after engine start, PCM determines
that TP circuit has a malfunction.
POSSIBLE CAUSE
• TP sensor malfunction
• Connector or terminal malfunction
• Open circuit between TP sensor terminal B and PCM terminal 91
• Short to reference voltage (Vref) supply circuit between TP sensor terminal C and PCM terminal 89
• PCM malfunction

Jun 26, 2014 | 2000 Mazda Protege

1 Answer

P0122 mazda


code p0122 refers to throttle position sensor A /accelerator pedal position APP switch A --low input or switch B circuit malfunction===causes--wiring short to ground TP/APP sensor--ECM--wiring open/short to ground/short to positive--TP/APP switch --ECM. I would replace the sensor first paying particular attention to the wiring and connectors ( water ingress and dirt)

Aug 13, 2013 | Mazda Cars & Trucks

1 Answer

How do i fix trouble code 122 and 102


Throttle position sensor and maf sensor are displayed for these codes.Trouble Code: P0122

TP Sensor Circuit Low Input

Possible Causes:


TP sensor signal circuit is shorted to sensor ground.TP sensor signal circuit is open (except 1996-1998 models).TP sensor VREF circuit is open between sensor and PCM.TP sensor is damaged or it failed (it may be shorted).PCM is damaged or has failed.Trouble Code: P0102

MAF Sensor Circuit Low Frequency

Possible Causes:


MAF sensor element hot wire contaminated or the sensor failed.MAF sensor signal shorted to ground or ground circuit problem.MAF sensor wiring routed close to the ignition wires, generator, solenoids or electric motors.PCM has failed.Click on link to view how to replace.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0996b43f80cb3c01

Oct 19, 2012 | 2003 Chevrolet Impala

1 Answer

2003 2.0 focus DOHC


What's this ? gaugesax out
P0123 - Throttle Position (TP) Circuit High Input The TP sensor circuit is monitored by the PCM for a high TP rotation angle (or voltage) input through the comprehensive component monitor (CCM). If during key ON engine OFF or key ON engine running the TP rotation angle (or voltage) changes above maximum calibrated limit, the test fails.
  • TP sensor not seated properly
  • TP circuit short to PWR
  • TP circuit short to ETCREF
  • SIG RTN circuit open to TP sensor
  • Damaged TP sensor
  • Damaged PCM
A TP PID (TP V PID) reading greater than 93% (4.65 volts) in key ON engine OFF, continuous memory or key ON engine running indicates a hard fault. P0123 - ETC Throttle Position (TP1) sensor Circuit High Input The ETC TP sensor 1 was flagged as fault status by the PCM indicating high voltage.
  • ETC TP1 sensor harness shorted to VREF
  • ETC TP1 sensor harness shorted to PWR
  • Damaged TP1 sensor
  • VREF circuit shorted to TP1 sensor
Drive vehicle, bring to a stop, turn key OFF. Start vehicle, run key ON engine running self-test at idle. Access KOER diagnostic trouble codes on scan tool.
P0193 - Fuel Rail Pressure Sensor Circuit High Input (FRP) The comprehensive component monitor (CCM) monitors the FRP sensor circuit to the PCM for high voltage. If voltage were to fall below a calibrated limit and a calibrated amount of time during testing, the test will fail.
  • FRP signal shorted to VREF or VPWR.
  • FRP signal open (gasoline only)
  • Low fuel pressure (NG only)
  • Damaged FRP sensor.
  • Damaged PCM.
  • High fuel pressure (caused by damaged fuel pressure regulator) NG.
A FRP PID value during KOER or KOEO less than 0.3 volts for gasoline or 0.5 volts for natural gas vehicles (NG) would indicate a hard fault. P0340 - Camshaft Position (CMP) Sensor Circuit Malfunction (Bank 1) The test fails when the PCM can no longer detect the signal from the CMP sensor on Bank 1.
  • CMP circuit open
  • CMP circuit short to GND
  • CMP circuit short to PWR
  • SIG RTN open (VR sensor)
  • CMP GND open (Hall effect sensor)
  • CMP misinstalled (Hall effect sensor)
  • Damaged CMP sensor shielding
  • Damaged CMP sensor
  • Damaged PCM
Harness routing, harness alterations, improper shielding, or electrical interference from other improperly functioning systems may have intermittent impact on the CMP signal.
P0705 TR Sensor TR Circuit Failure TR circuits, indicating an invalid pattern in TR_D. Condition caused by a short to ground or an open in P/N, D, R, 2 or 1 circuits. Open in the taillamp ground circuit. This DTC can be set by an incorrectly adjusted TR sensor. Increase in control pressure (harsh shifts). Defaults to D for an invalid position. MIL on. Inspect the taillamp ground circuit. Go To Pinpoint Test C .

May 27, 2017 | 2003 Ford Focus

1 Answer

Codes P700,P1121 and P0122



Trouble Code: P0122
Are you sure on p1121 or was it po121 because there is no p1121?
Throttle Position Sensor 'A' Circuit Low Input
Possible Causes:


TP sensor signal circuit is shorted to ground TP sensor VREF circuit is open or shorted to ground


Trouble Code: P0700

TCU Request For MIL -ON-
Possible Causes:


poor connection TCM


Trouble Code: P0121

Throttle Position Sensor Performance
Possible Causes:


MAF sensor or TP sensor ground circuit has high resistance MAF sensor has drifted out of calibration TP sensor has drifted out of calibration TP sensor is damaged or has failed PCM/ECMTP sensor is damaged or has failed PCM has failed

Jun 08, 2012 | 2003 Kia Sorento

1 Answer

How do you fix a PO113 & PO123 code on a 02 Jeep Grand Charokee Larado 4.0



Trouble Code: P0113

IAT Sensor Circuit High Input
Possible Causes:


IAT Sensor signal circuit shorted to VREF (5v) IAT Sensor signal circuit is open, or the ground circuit is open


Trouble Code: P0123

TP Sensor/APPS Circuit High Input
Possible Causes:


Related TP Sensor engine DTCs present Intermittent wiring or connector problem TP signal circuit is open or is shorted to battery voltage or to 5v supply circuit TP sensor has failed TP sensor ground circuit is open PCM has failed IAT Sensor is damaged or it has failed (an internal open circuit) PCM has failed

Jun 02, 2012 | 2002 Jeep Grand Cherokee

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...