Question about 2006 Suzuki GSX 600 F (Katana)

Open Question

06 katana 600 my starter button is loose and won't depressed. Now I don't have to press start button only clutch will start the motorcycle. What could be the problem? did I loose a spring or something?

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: 05 katana new bat new starter new relay still

check these things: is the engine run/stop switch pressed? is the bike in gear? is your safety switch always depressed?

Posted on Apr 21, 2009

jmgldsmth
  • 1869 Answers

SOURCE: 06 s83 won't start. Rode for 70 miles, parked in

replace your battery although you have 12 volts your battery is producing very little amps not even enough to energize your start relay let alone your starter motor

Posted on May 03, 2009

  • 566 Answers

SOURCE: How can I get an owners manual for my suzuki

You can also download it from diplodocs.com
Or from here (temporary link):
http://dl.getdropbox.com/u/1322442/SUZUKI%20GSX600F%20%20user%20guide.PDF

Posted on Aug 16, 2009

ginocussen
  • 216 Answers

SOURCE: replace clutch for 2006 suzuki gsxr 600 motorcycle

Do you have the repair manual ?? you can get it here for free, rate me if this helped you. Thanks.

http://rapidshare.com/files/12145854/GSX-R600-750K6.pdf

or here

http://www.carlsalter.com/download.asp?fileid=083117122117107105095071083088045082054048048095050048048048045050048048051095082101112097105114095077097110117097108046112100102

Posted on Aug 27, 2009

  • 47 Answers

SOURCE: drain gas tank motorcycle 2001 katana 600

Remove fuel pipe from under side of tank. drain into a suitable container.

Posted on Mar 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Katana 600. Why no power to ignition?


Hi, Jason and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Faulty starter button.
8. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
Suzuki Katana 600 2006 service manual DOWNLOAD FREE FULLMANUALS COM

Sep 09, 2015 | Power Motorcycles

1 Answer

Nothing turns on when I turn the ignition on


Hi, Josh before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, especially "AGM" batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
MY Katana 600 Won Start it won even Click
What to do When Your Motorcycle Won Start
OEM parts for Suzuki
Suzuki GSX 600F 2000 Owner Manual
Suzuki GSX600F Service Manual Page 2

May 11, 2017 | 2002 Suzuki GSX 600 F (Katana)

1 Answer

How to replace starter switch on 2006 katana 750


This is on my 06 katana 750 my starter button is loose and keeps my starter going I took it apart and don't see how to fix it thought it might have been a spring in it I didn't see one

Jul 09, 2012 | 2006 Suzuki GSX 600 F (Katana)

3 Answers

Katana wont start


You're most likely looking at a dead battery (try jump leads)

A bad starter relay (short out the terminals on top of the relay and see if it turns over)

Or a dead starter motor (service or replace or if it's sticking try rocking backwards and forwards in gear to unstick)

Feb 20, 2012 | 1992 Suzuki GSX 600 F (Katana)

4 Answers

My 92 600 katana wont start. It wont even turn over, when i press the start nothing happens. the battery is good i charged it up and all the lights work but it still wont turn over.


If the clutch switch, the neutral safety switch, and the side stand switch are all working correctly, then test the starting system. When you push the starter button you should hear a click , so you know the button is working.Follow the positive battery cable to the starter solenoid. Disconnect the two wires that activate the solenoid, test the two wires from the harness make sure the needle on your voltage meter jumps when you push the starter button, this means the button is good. Take a wire and jump the two posts on the solenoid or touch the two cables together. If your starter works, then you need a new solenoid. If you hold the starter button and tap on the starter with a plastic hammer and the starter works you need new starter brushes. Anything else wrong with the starter and you need to replace the starter assembly , the manufacturer does not make replacement parts for the starter.

Jul 28, 2011 | 1992 Suzuki GSX 600 F (Katana)

1 Answer

Triumph Daytona 600 will not turn over


Hi, Jordan_x_tur before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bike won start Not battery think
04 Daytona 600 Won start please help
Triumph 2003 Daytona 600 Service Manual
Hermys Tire Cycle Inc 2004 Triumph Genuine Tools and manuals Motorcycle...
Triumph Daytona 600 Owner Handbook Manual

Jul 04, 2017 | Triumph Daytona 600 Motorcycles

1 Answer

I have a Suzuki katana GSX600F 06. It has a safety feature that won't let you start it unless you engage the cluthch. I think something is wrong with this because I have to pushstart my bike. At first...


Hi and welcome to the site,

Initially, is there a clicking sound when pressing on the start button switch?

Offhand, if there is a clicking sound, then a likely possibility would be the starter relay. Temporarily jump the 2 big terminals and note if the starter motor will spin.

Alternately, if there is no clicking sound, then check the clutch switch or for test purposes, bypass this switch by temporarily jumping the 2 terminals. If still a no-go, try starting with the sidestand folded up.

Good luck and thank you for asking.

Aug 10, 2010 | 2006 Suzuki GSX 750 F (Katana)

1 Answer

Push the starter button and does not do nothing but will start from the starter cylinoid


Hi and welcome to FixYa,

Initially, try starting with the clutch lever pulled in and/or the side stand folded up.

Offhand, check:
  • consistent IGN +12 on 1 wire going to the starter relay (solenoid);
  • the other wire should go to ground when starter button is pressed.
Postback results of above tests.

Good luck and thank you for asking FixYa.

Dec 28, 2009 | 1997 Suzuki GSX 600 F (Katana)

1 Answer

I have a 1988 suzuki katana i have bought a starter relay for it and the bike has power to starter and ignition switch but when i push the start button nothing it want do anything i tryed to straght wire...


it could be your clutch safety switch.follow the wires from your clutch lever till you find a connecter. unplug and put a jump wire on the bike side. make sure you are in neutral .pull in clutch and try.if starts replace the sw

Sep 19, 2009 | 1988 Suzuki GSX 600 F (Katana)

1 Answer

05 katana new bat new starter new relay still won,t start when I push the srart button when i push the starter button head light goes dim.


check these things: is the engine run/stop switch pressed? is the bike in gear? is your safety switch always depressed?

Apr 05, 2009 | 2006 Suzuki GSX 750 F (Katana)

Not finding what you are looking for?
2006 Suzuki GSX 600 F (Katana) Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...