Question about Motorcycles
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you get the sevice manual or contact a dealer to get the correct oil amount for your bike, they need to know the model and year, you have to have the forks off the bike. take the fork caps off, take the springs out compress the upper fork tube all the way and add the specified oil. if they also give you the measured amount from the top that's the best way to get both fork oil levels exact. there is a special tool that you set the oil level in millimeters and it sucks out the oil to the right level, but before you do that step after adding the oil always pull and push on the cartage rod several times to remove air from the cartage tube. you will hear the air coming out and you will feel the changes in the cartage rod as the cartage tube fills up with oil and the air is removed.
something i'm confussed on though is if you replaced a seal you would have had to brake down the fork to replace it. you would have poored the oil into a container, cleaned all the internal parts,and used a fork seal driver to install the new seal. part of your question asks where do i put the oil in? thats in the open end of the fork after you have taken off the fork cap. It sounds to me like you only replaced the dust seal on one fork. that is not going to fix your leaking fork. you need to replace the oil seal thats pressed inside of the top fork tube.
Posted on Dec 26, 2008
SOURCE: ktm output shaft oil seal
if you are lucky there is a clip behind the front sprocket remove both then pop the seal out drain gear box oil first though. if not which i think is most probable the engine will need splitting if you are good with spanners it is quite easy being a 2 stroke .in brief remove engine remove bore and carb in one lump remove sprocket gear lever split g-box .seal up push old seal out, from outside in, fit new then reverse prosses. a good manual will help.
Posted on Feb 13, 2010
Tips for a great answer:
Feb 02, 2016 | KTM Motorcycles
Jul 31, 2013 | KTM 125 EXC Motorcycles
Sep 24, 2011 | 2008 KTM 300 EXC-E
Sep 20, 2011 | 2002 KTM EXC 300
Oct 12, 2017 | 2007 KTM 125 EXC
KTM Owners Manual
Please contact us if you have further inquires.
Jul 12, 2011 | 2009 KTM 450 EXC
Aug 06, 2017 | 2002 KTM EXC 300
Apr 20, 2010 | 2002 KTM EXC 380
Mar 06, 2010 | 2006 KTM 200 EXC
Dec 02, 2009 | 2005 KTM EXC 450 Racing Usa
23 people viewed this question
Usually answered in minutes!