Question about 2003 Harley Davidson FLHR Road king

1 Answer

How do you take cover for handle bar cover come off

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 93 Answers

Use your fingernail or a fine blade of some sort to pop the little caps out of the four allen head bolts that secure the clamp to the bars. Loosen the allen screws while being careful of the bars dropping once the bolts are loose.

Posted on Jul 31, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Throttle cable replacing


What year model. Take tank off. Take cover off throttle on handle bars. Release tension on throttle cable by loosening cable adjusters. Release cable from carburetor. Release cable from throttle housing on handle bar. Reverse instruction to install new cables ...2 cables.

Sep 29, 2013 | Harley Davidson FLHTCUI Electra Glide...

1 Answer

Remove lock hub from rotors 1995 toyota t100 4wd


1995 Toyota T100 4WD Pickup
Manual Locking Hub - Removal and Installation
REMOVAL & INSTALLATIONSee Figures 1 through 11

0900c152800611b7.jpg

Fig. 1: Exploded view of the free wheeling hub


0900c152800611b8.jpg

Fig. 2: Turn the handle with your hand to the free position


0900c152800611b9.jpg

Fig. 3: Note the directions in which you can turn the handle: left-free, right-lock

  1. Remove the hub cover. Set the control handle to the "FREE" position.


0900c152800611ba.jpg

Fig. 4: With the handle in the free position, remove the six hub cover bolts

  1. Remove the cover mounting bolts, then pull off the cover. Remove and discard the gasket.

0900c152800611bb.jpg

Fig. 5: Pull the cover off

  1. Remove the bolt with washer.


0900c152800611bc.jpg

Fig. 6: Using the correct size wrench, loosen ...


0900c152800611bd.jpg

Fig. 7: ... then remove the center bolt and washer

  1. Remove the mounting nuts and washers.


0900c152800611be.jpg

Fig. 8: Next, remove the outside mounting nuts and washers

  1. Using a brass bar and hammer, tap on the bolt ends, then remove the cone washers.



0900c152800611bf.jpg

Fig. 9: Using a brass bar and hammer, tap on the bolt ends ...


0900c152800611c0.jpg

Fig. 10: ... then remove the cone washers

  1. Pull off the hub body.



0900c152800611c1.jpg

Fig. 11: The free wheeling body should come off easily; be sure to discard the old gaskets

  1. Remove and discard the gasket.

To install:
  1. Place a new gasket into position on the front axle hub. Install the free wheeling hub body with the cones washers and nuts. Tighten the nuts to 23 ft. lbs. (31 Nm).
  2. Install the bolt with washer, tighten to 13 ft. lbs. (18 Nm).
  3. Apply multi-purpose grease to the inner hub splines.
  4. Set the control handle and clutch to the free position.
  5. Place a new gasket into position on the cover.
  6. Install the cover to the body with the follower pawl tabs aligned with the non toothed portions of the body.
  7. Tighten the cover mounting bolts to 7 ft. lbs. (10 Nm).

10_30_2011_3_59_56_am.jpg

Fig 1.Exploded view of the Free Wheeling Hub


10_30_2011_4_00_52_am.jpg

Fig. 2 Turn the handle by hand to the "FREE" position


10_30_2011_4_01_38_am.jpg

Fig. 3: Note the directions in which you can turn the handle: left-free, right-lock.


10_30_2011_4_02_14_am.jpg

Fig. 4 With the handle in the free position, remove the six hub cover bolts.


10_30_2011_4_02_44_am.jpg

Fig. 5 Pull the cover off.


10_30_2011_4_03_26_am.jpg

Fig. 6 Using the correct size wrench, loosen ...


10_30_2011_4_03_59_am.jpg

Fig. 7 ...then remove the center bolt and washer


10_30_2011_4_04_37_am.jpg

Fig. 8 Next, remove the outside mounting nuts and washers.


10_30_2011_4_05_11_am.jpg

Fig. 9 Using a brass bar and hammer, tap on the bolt ends.


10_30_2011_4_05_43_am.jpg

Fig. 10 ... then remove the cone washers


10_30_2011_4_06_59_am.jpg

Fig. 11 The free wheeling body should come off easily; be sure to discard the old gaskets.

Oct 29, 2011 | Cars & Trucks

1 Answer

How doe the band on my chain break attach to my chainsaw mine is broken and i do not know how to install it. or how to get the clutch off so i can replace it


It can be a little tricky!

If you are referring to chain break band

Tools you will need:
1/2 Socket (to remove bar nuts)
T25(torq) or you can use a Flathead screw driver but is a little harder.

Remove 2 bar nuts,Clutch cover,bar,chain, 2 screws on black bar handle right behind clutch cover(this is needed because there is a hidden screw there for the chain break) You will need a new chain brake (my guess is that it is part # 530071893 aprox $15) but you will want to verify that with your model number.

You should see the chain break assembly, 3 - T25 screws are visible after the clutch cover is removed(note sometimes you have to clean saw dust to make screw head visible) the other T25 screw is hidden under the black bar handle. Once you remove all 4 screws on the chain brake you will be able to pull it off.

Installing the new one is the tricky part because if it is set(or break is on) you will have a hard time putting it on.One of the easiest ways is to focus on it near the muffler you will see that a metal 3 pronged gear fits into the plastic part of the chain break handle.and if the band is too tight to fit over the clutch drum you will have to carefully reset it by applying pressure onto the area that has the 3 pronged gear and chain break handle make sure that the handle is pushed forward all the way while you apply pressure then slowly pull chain break handle back till you hear a "snap" this resets the chain brake spring and the band should now fit over the clutch drum.Now, proceed with putting back together 4 chain brake assembly screws,2 handle screws,and bar,chain,clutch cover,and 2 bar nuts.

Please note it is important that you apply quite a bit of pressure onto chain break area where metal (3 pronged) gear fits into handle while resetting or when you reset it the metal part can cut into and damage the plastic piece in the chain break handle.

You can see a breakdown here: http://www.searspartsdirect.com/partsdirect/part-model/Poulan-Parts/Chainsaw-Parts/Model-P4018WT/1324/1503220/P0506041/00002?blt=06&prst=0&shdMod=P4018WT

Hope this helps!

Feb 20, 2011 | Poulan 18" Wild Thing Chainsaw

2 Answers

I am looking for a new rounded handle bar that you use to push the stroller along with. The foam on my one is damaged


unfortunately I believe you have to buy a new chassis jus for the handle bar. The best way is to just buy a handle bar cover for the handle bar. That will cover the damage and also protect it from further damage.

Sep 17, 2010 | Bugaboo Cameleon Stroller

1 Answer

How do I reattach chain after it slipped off


Normal 0 This will be the basic instruction for most common saws. Check that the chain brake is in disengaged position by moving the front hand guard towards the front handle if the saw is equipped with a chain brake on the handle. Loosen the bar nuts on the clutch cover. Loosen tension screw or other adjuster (thumbscrew) to allow the bar to be moved toward the engine. Some saws have this tension adjustment built into the bar. This will provide enough slack in the chain to able to reinstall it. It may be necessary to remove the side cover to gain access to the clutch/gear assembly on the side of the engine if the chain also jumped the gear here. Remove the cover, inspect for any debris or other obstructions in this area. If none, replace the chain back over the drive gear and in the bar groove all the way around the bar. It may be necessary to turn the bar adjuster screw more to provide enough slack in the chain to do this. Once the chain is in place reinstall the cover and bar lock nuts. Snug up the nuts but do not tighten these. Turn the bar/chain adjuster screw to tighten the chain on the bar (take up slack). I usually tighten to a point where there is no slack between the chain and the bottom of the bar and I can still turn the chain easily around the bar by hand. With experience you will get the feel for this chain tension. Once the chain is properly tensioned, tighten the bar lock bolts/ nuts on the side cover. I hope this helps you out.

Jun 25, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

Form on handle bar has ripped can i repair it


I'm not sure if you can repair it, but you can cover it. Check out handle bar, bumper bar and bassinet/ seat frame covers for your bugaboo stroller foam at www.bbsprouts.com

Apr 27, 2010 | Baby Gear

3 Answers

Replacement foam for quinny buzz handlebar


Hello I am making handle bar, bumper bar and frame covers for the bugaboo and can probably help you with a cover.  Contact me at www.bbsprouts.com
Diane

Mar 08, 2010 | Quinny Buzz 3 Sulphur Jogger

3 Answers

460 Husquvarna Chainsaw


I have a 340 Huskuvarna but experienced the same problem. It must be a common Husky problem because when I called their tech support the lady told me exactly what to do. So your first solution is to call tech support and they will talk you thru it. Basically though... after you have your bar and chain on. Put you brake handle forward (brake ON postion). Put your cover on, bar nuts on loosely and get the brake part engaged with the cover plate. It doesn't look right at this point. The cover will be crooked/cocked with the front part on and the back part over the clutch off. Then push down on the back part as you pull the brake handle into the off position.

Sep 13, 2008 | Makita DCS51018 18" 45cc Chain Saw 2 Cycle

1 Answer

My driver door wont open from the inside


there is a linkage bar that falls out of the handle. you need to take off the door cover there will be a loose bar. the bar will fit back in to the handle. you'll most likely need a c clip so it stays in place

Jul 29, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
2003 Harley Davidson FLHR Road king Logo

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...