Question about Harley Davidson Motorcycles
Posted by Anonymous on
Hi Anonymous, take a ride over to your local dealers service department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary and offer professional advice and assistance concerning your issue. Have a nice day.
Posted on Jun 09, 2015
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check your all the fuse. Check battery connectors. Check your battery with volt meter. If your battery is old, depending of your mileage it needs replacement But first check if its still charging. You have to fully charge your battery in order for a kick start of your hd 2001. Hope this help you out.
Posted on Apr 04, 2010
Pretty hard to offer suggestion with so little info.
If chain drive could be chains too loose.
Check oil level.
Get M/C shop to check......alot of good money at stake there.
Posted on Apr 22, 2010
Thirty over is nothing. I just finished a rebuilt on a 1970 model and we went 0.050" over on it. It was already at 30 over and the pistons scored.
Anyway, don't use one of these cheap Chinese made bendix's. Get an ACCEL. They may be made in China but they're better. You can't get good Shovelhead parts anymore.
Now, before you put the outer primary back on, use your hand and operate the fork that shifts the bendix into engagement with the ring gear. Does it engage like it's supposed to. You'll probably have to turn it just a bit. Now, do it again with the outer primary on. Does it still engage smoothly?
Now, here's the cause of most starter grinding problems on a shovel. The starter, ring gear, and outer primary are all out of alignment. The starter housing, the one with the big gear in it is supposed to have alignment pins in it as well as the outer primary. These pins are to ensure that the starter drive and the ring gear are properly aligned with each other. With the starter and outer primary on, you should be able to pull on the plunger of the solenoid and the starter drive engage fully and smoothly. Also don't forget the large brass washer. This keeps the drive from going too far.
If you're worried about low voltage, take the battery to an automotive parts store and ask them to load test the battery. If it drops below 10 volts, buy a new battery.
Posted on Aug 18, 2010
Tips for a great answer:
Sep 09, 2016 | 2007 Harley Davidson FLHX Street Glide
Aug 22, 2013 | Harley Davidson Motorcycles
May 08, 2013 | Harley Davidson FLHTCUI Electra Glide...
Apr 24, 2013 | 2001 Harley Davidson FLHTCUI Electra Glide...
Mar 12, 2013 | Cars & Trucks
Jan 06, 2013 | Harley Davidson XLH Sportster 883...
Aug 18, 2010 | Harley Davidson FLSTF Fat boy Motorcycles
May 17, 2010 | 2007 Ford F-150 Harley Davidson
Nov 11, 2008 | Harley Davidson Harley-Davidson Motorcycle...
96 people viewed this question
Usually answered in minutes!