Question about Motorcycles
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Down and dirty way - take it to the dealer and have them install a new tire....
The hard way: place bike on bike jack and remove rear wheel by removing the axle nut and drifting the axle out of the wheel. Derail the belt/chain and drop the wheel out of the brake caliper. Remove valve stem to deflate the tire. Get a set of tire spoons and a 12 pack of COLD brew cause working with tire spoons is no FUN! Pry the bead loose with one spoon and the work your way around the wheel prying the tire beed to the outside of the wheel. Repeat this process for the back side of the tire (in the same direction as the first side so the tire will come off the wheel. Reverse and repeat to install new tire.
By now you will be loading your wheel into the truck and heading to the HD shop. It just really isn't worth the hastle to save the $25 or so to have this job done.
Align wheel with new tire on it with the brake caliper so that you have one shoe on each side of the rotor (you may have to actually remove the caliper if your pads are thick. Install your belt drive/chain drive and then lift the wheel to insert the axle through the swing arm, the chain tensioner and wheel. Reverse
on the other side. Place axle nut on axle and torque to about 80lbs.
Good to go.
Posted on Aug 17, 2009
To change the switch, first unplug the wires at the switch. Screw the old switch out and install the new switch into the tee connector. Do not depress either brake lever while the switch is out. Tighten the switch and reconnect the wires.
Usually you don't have to bleed any air out of the brake system but check the rear brakes for proper operaion. If the rear brake pedal goes too far down, bleed the brakes at the rear caliper. Make sure you don't run the rear brake master cylinder dry while bleeding the rear brake. Use only the approved type of brake fluid, do not mix the different types of fluid. Make sure the rear brakes are working properly before riding the bike.
Posted on Oct 05, 2009
SOURCE: need to change battery
remove the screw from the rear of the seat lift the seat gentlypulling the seat towards the rear of the machine once you have the seat of the battery is right in front of you. Regards Geoff
Posted on Apr 09, 2010
Tips for a great answer:
Jun 15, 2016 | Electrical Supplies
Jan 31, 2015 | 2011 Harley Davidson FLSTC Heritage...
Mar 11, 2014 | 2005 Harley Davidson FLSTN- FLSTNI Softail...
Mar 24, 2013 | 2001 Harley Davidson FLHRCI Road King...
Jun 02, 2012 | 2008 Harley Davidson FLSTC Heritage...
Jul 09, 2011 | Harley Davidson FXST Softail Standard...
Jun 01, 2010 | 2000 Harley Davidson FLSTC Heritage...
58 people viewed this question
Usually answered in minutes!