Question about KTM Motorcycles

Open Question

Swingarm bearing flat side witch way - KTM Motorcycles

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ollie reece
  • 1167 Answers

SOURCE: gsxr 750 wv swingarm bearing adjustment ?

hi buddy you cant adjust bearings the bearing are there for smooth movement you can losen the swing and arm bolt to make them a little loser but too lose will be dodgy get back to me what you mean

Posted on Oct 01, 2009

  • 269 Answers

SOURCE: swingarm bearing and seal assembly

If you just are looking for an exploded view. You can view, look only at bikebandits.com. Can't print or save, just look. Hope this helps.

JP

Posted on Oct 29, 2009

  • 8404 Answers

SOURCE: exploded view/ 07 klr650 swingarm/ bearing part numbers

call the company you choose, they will help you (or not) directly.

Posted on Nov 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

View 2010 street bob rear axle assy


You need a parts book schematic, service manual does not really show much. Right side insert axle through adjusters in swingarm then brake caliper support arm then short spacer then into bearing in wheel then there is a spacer in the hub between that bearing and the left bearing so then through those and out left side through long spacer into swingarm and adjuster and then out left side of swingarm, install washer, cone nut and then "E" clip.

May 20, 2014 | 2006 Harley Davidson FXDBI Street Bob

1 Answer

Remove rear wheel from 008 streetgide


To remove a 2008 Touring rear wheel FIRST raise the bike with the rear wheel off the ground, remove the saddlebags, inspect the wheel bearings, remove the left side muffler,on (FLHX) models equipped with low profile shock absorbers the remove left side lower saddlebag support rail, if ABS equipped cut the cable strap to release the rear wheel speed sensor cable from the brake hose to the brake caliper, remove the two socket head screws to release the brake caliper from its bracket, remove the brake caliper from the brake disc, pry the inner and outer brake pads back for additional clearance as necessary using a stiff putty knife with a wide thin blade to avoid scoring or scratching the brake disc, set the brake caliper on the passenger footboard, remove the E-clip from the groove at the end of the axle, loosen the cone with an AXLEfNUT TORQUE ADAPTER available from JIMs or H-D to get up between the axle nut and the right side muffler, remove the cone nut and adjuster cam from the axle, rotate the weld nut on the opposite side of the axle in a counterclockwise direction until the wheel is loose, use a soft metal drift to tap the axle towards the left side of motorcycle and catch the external spacer(s) (noting their place and orientation for reinstallation), pull the axle free of the rear swingarm, the caliper bracket, the rear wheel speed sensorf(if ABS equipped), and the wheel hub, keeping the ABS wheel speed sensor and ABS encoder bearing away from al magnetic fields such as magnetic parts trays, magnetic base dial indicators, alternator rotors, etc etc to avoid destroying them, remove the caliper bracket from the anchor weldment on the rear swingarm, move the wheel forward and slip the belt off from the compensator drive sprocket, hold onto the compensator drive sprocket while removing the rear wheel so that the isolators will not fall out, if necessary, remove to remove the brake disc remove the five fasteners and release the disc from the hub after marking the disc and the hub for re-assembly alignment in their original position.

To install a 2008 touring rear wheel FIRST reinstall the brake disc in its original orientation if it was removed and tighten the fasteners alternatively to 30-45 ft-lbs (41-61 Nm), ensure that the compensator sprocket is square and fully seated in its proper position, put the wheel into the rear swingarm and slide it forward and put the belt over compensator sprocket and then move the wheel back to take up the slack in the belt, install the caliper bracket on the anchor weldment of the rear swingarm, apply a light coat of wheel bearing grease onto the axle, the bearing bores and the bore of the spacer sleeve, insert the axle through the left side of the rear swingarm, the thin external spacer, and the rear wheel drive compensator sprocket into the and through the wheel hub left side and out the right side, through the rear wheel speed sensor (if ABS equipped) (the grooves on the external spacer, or index pin on the wheel speed sensor (if ABS equipped), are on the outboard side) or the thick external spacer if not ABS equipped, the caliper bracket, and the right side of the swingarm, rotate the axle so that the flat on the threaded end is topside and then with the thumb down and the cam forward install the adjuster cam on the end of the axle, avoiding contact with threads apply a thin film of LOCTITE ANTI-SEIZE lubricant to the inboard side of the cone nut, install the cone nut on the axle finger tight, obtain torque wrench with 1/2 inch drive head and the AXLE NUT TORQUE ADAPTER, install the torque adapter perpendicular to torque wrench ONLY or applied torque will be inaccurate, insert the tool up between rear wheel and the muffler and onto the cone nut, verify that the adjustment cam just contacts the weld nub on both sides of the swingarm (if necessary, push the wheel forward somewhat to do this), if ABS equipped route the sensor cable forward and outboard of the caliper bracket and then continue forward with it following the top of the swingarm, rotate the wheel speed sensor in a counter-clockwise direction until its index pin makes contact with the caliper bracket at its proper contact point, tighten the cone nut to 15-20 ft-lbs (20-27 Nm), properly position and install the brake caliper, align the holes in the caliper with the holes in the caliper bracket install the two socket head screws and alternately tighten them to 43-48 ft-lbs (58.3-65.1 Nm), install a new cable strap 1.25 in. (31.8 mm) in front of the brake hose crimp capturing the rear wheel speed sensor cable and brake hose together, using a belt tension gauge adjust the drive deflection to FLHR/C 3/8-7/16 inches or 9.5-11.1mm; FLHT/C/U FLTR FLHX 1/4-5/16 inches or 6.4-7.9 mm at the loosest spot in the belt, holding the weld nut on the left side of the axle tighten the cone nut to 95-105 ft-lbs (128.8-142.4 Nm), loosen it nut one full turn, retighten it to 95-105 ft-lbs (128.8-142.4 Nm), recheck the belt deflection, install a newE-clip in groove on right side of axle with the flat side out, on (FLHX), models with low profile shock absorbers properly install and torque into place the left side lower saddlebag support rail, install left side muffler, verify that the exhaust pipes are in alignment and do not contact the vehicle frame or mounted components, tighten the TORCA clamp to 45-60 ft-lbs (61-81 Nm), pump the brakes to position the pad against the brake disc, install the saddlebags and road test the motorcycle for proper operation.

May 05, 2014 | 2008 Harley Davidson FLHX Street Glide

1 Answer

Exploded view/ 07 klr650 swingarm/ bearing part numbers


call the company you choose, they will help you (or not) directly.

Nov 30, 2012 | kawasaki Motorcycles

1 Answer

Need diagram of swingarm pivot bearings 2008 yz250


Hi, Mark for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Need diagram of swingarm pivot bearings 2008 yz250 Google Search
Installing New Swingarm Linkage Bearings
Yamaha YZ250 Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Oct 01, 2011 | 2008 Yamaha yZ250

1 Answer

The rear wheel has had new bearings on it and is about 100mm out of line.Where is the main adjustment, the swingarm or the axle


100 mm is 4 inches out of line....thats severe.
Is this a chain drive bike...if so the swingarm slots the axle runs through often have marks so the axle is even on both sides.

Apr 11, 2011 | Yamaha XJ 600 Motorcycles

1 Answer

I have 2004 flstc how do i grease the swingarm, where are the grease plugs


There are no grease fittings on the swingarm bearing on your Softail. You must pull the swingarm to get to the bearings.

Steve

Mar 20, 2011 | 2004 Harley Davidson FLSTC - FLSTCI...

1 Answer

Hello, I have a 99 evo fatboy, with 3/4" axle. I want to make sure I got all the spacers and washers in the correct order when putting back on. Axle goes in on rotor side, with adjuster on first....


Sounds like you've got it together correctly. There is no washer between the brake caliper bracket and the swingarm. You can put the axle in from either direction. We usually put them in from the left side so that we no longer have to remove a muffler to remove the rear wheel. The nut is now on that side. Just make sure the wheel turns smoothly and the brakes work correctly before taking in out on the road. If you hear a chirping noise when you shift gears, your rear belt is too loose.

Good luck
Steve

Dec 17, 2010 | Harley Davidson FLSTF - FLSTFI Fat Boy...

1 Answer

Swingarm bearing and seal assembly


If you just are looking for an exploded view. You can view, look only at bikebandits.com. Can't print or save, just look. Hope this helps.

JP

Oct 27, 2009 | 2005 Harley Davidson FLHTC - FLHTCI...

1 Answer

Gsxr 750 wv swingarm bearing adjustment ?


hi buddy you cant adjust bearings the bearing are there for smooth movement you can losen the swing and arm bolt to make them a little loser but too lose will be dodgy get back to me what you mean

Oct 01, 2009 | 1997 Suzuki GSX-R 750 V

1 Answer

How to change to rear tire


To remove a 2008 Touring rear wheel FIRST raise the bike with the rear wheel off the ground, remove the saddlebags, inspect the wheel bearings, remove the left side muffler, on (FLHX) models equipped with low profile shock absorbers the remove left side lower saddlebag support rail, if ABS equipped cut the cable strap to release the rear wheel speed sensor cable from the brake hose to the brake caliper, remove the two socket head screws to release the brake caliper from its bracket, remove the brake caliper from the brake disc, pry the inner and outer brake pads back for additional clearance as necessary using a stiff putty knife with a wide thin blade to avoid scoring or scratching the brake disc, set the brake caliper on the passenger footboard, remove the E-clip from the groove at the end of the axle, loosen the cone with an AXLEfNUT TORQUE ADAPTER available from JIMs or H-D to get up between the axle nut and the right side muffler, remove the cone nut and adjuster cam from the axle, rotate the weld nut on the opposite side of the axle in a counterclockwise direction until the wheel is loose, use a soft metal drift to tap the axle towards the left side of motorcycle and catch the external spacer(s) (noting their place and orientation for reinstallation), pull the axle free of the rear swingarm, the caliper bracket, the rear wheel speed sensorf(if ABS equipped), and the wheel hub, keeping the ABS wheel speed sensor and ABS encoder bearing away from al magnetic fields such as magnetic parts trays, magnetic base dial indicators, alternator rotors, etc etc to avoid destroying them, remove the caliper bracket from the anchor weldment on the rear swingarm, move the wheel forward and slip the belt off from the compensator drive sprocket, hold onto the compensator drive sprocket while removing the rear wheel so that the isolators will not fall out, if necessary, remove to remove the brake disc remove the five fasteners and release the disc from the hub after marking the disc and the hub for re-assembly alignment in their original position.

To install a 2008 touring rear wheel FIRST reinstall the brake disc in its original orientation if it was removed and tighten the fasteners alternatively to 30-45 ft-lbs (41-61 Nm), ensure that the compensator sprocket is square and fully seated in its proper position, put the wheel into the rear swingarm and slide it forward and put the belt over compensator sprocket and then move the wheel back to take up the slack in the belt, install the caliper bracket on the anchor weldment of the rear swingarm, apply a light coat of wheel bearing grease onto the axle, the bearing bores and the bore of the spacer sleeve, insert the axle through the left side of the rear swingarm, the thin external spacer, and the rear wheel drive compensator sprocket into the and through the wheel hub left side and out the right side, through the rear wheel speed sensor (if ABS equipped) (the grooves on the external spacer, or index pin on the wheel speed sensor (if ABS equipped), are on the outboard side) or the thick external spacer if not ABS equipped, the caliper bracket, and the right side of the swingarm, rotate the axle so that the flat on the threaded end is topside and then with the thumb down and the cam forward install the adjuster cam on the end of the axle, avoiding contact with threads apply a thin film of LOCTITE ANTI-SEIZE lubricant to the inboard side of the cone nut, install the cone nut on the axle finger tight, obtain torque wrench with 1/2 inch drive head and the AXLE NUT TORQUE ADAPTER, install the torque adapter perpendicular to torque wrench ONLY or applied torque will be inaccurate, insert the tool up between rear wheel and the muffler and onto the cone nut, verify that the adjustment cam just contacts the weld nub on both sides of the swingarm (if necessary, push the wheel forward somewhat to do this), if ABS equipped route the sensor cable forward and outboard of the caliper bracket and then continue forward with it following the top of the swingarm, rotate the wheel speed sensor in a counter-clockwise direction until its index pin makes contact with the caliper bracket at its proper contact point, tighten the cone nut to 15-20 ft-lbs (20-27 Nm), properly position and install the brake caliper, align the holes in the caliper with the holes in the caliper bracket install the two socket head screws and alternately tighten them to 43-48 ft-lbs (58.3-65.1 Nm), install a new cable strap 1.25 in. (31.8 mm) in front of the brake hose crimp capturing the rear wheel speed sensor cable and brake hose together, using a belt tension gauge adjust the drive deflection to FLHR/C 3/8-7/16 inches or 9.5-11.1mm; FLHT/C/U FLTR FLHX 1/4-5/16 inches or 6.4-7.9 mm at the loosest spot in the belt, holding the weld nut on the left side of the axle tighten the cone nut to 95-105 ft-lbs (128.8-142.4 Nm), loosen it nut one full turn, retighten it to 95-105 ft-lbs (128.8-142.4 Nm), recheck the belt deflection, install a newE-clip in groove on right side of axle with the flat side out, on (FLHX), models with low profile shock absorbers properly install and torque into place the left side lower saddlebag support rail, install left side muffler, verify that the exhaust pipes are in alignment and do not contact the vehicle frame or mounted components, tighten the TORCA clamp to 45-60 ft-lbs (61-81 Nm), pump the brakes to position the pad against the brake disc, install the saddlebags and road test the motorcycle for proper operation.

Feb 27, 2009 | 2008 Harley Davidson FLHR Road king

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...