Question about Motorcycles

Open Question

Kawasaki fork oil. How much for gpz 1000 rx. Fork legs

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
robotek
  • 1512 Answers

SOURCE: Front fork oil capacity

Hi Lukepentcof.

its 350cc or 11.8 ounces in the Clyma book, but that's for a 1986 onwards model. you can vary the amount you use to suit your style of riding anyways. I doubt it would be that far from the mark.

regards
robotek

Posted on Dec 08, 2008

Ad
  • 16 Answers

SOURCE: how do i dismantle front forks to replace the oil seals

You just needed to.... remove front wheel, support bike on something, undo retaining bolts on forks, tap out fork legs from the top, using a soft mallet. Take out fork seals with a seal pick, (halfords) Replace old seal with new seals, in reverse order) sliding over the fork leg, tapping into place. Then put replace forks etc in reverse order (from dissassembly). Hope this helps

Posted on Feb 21, 2009

  • 132 Answers

SOURCE: 97 yamaha thunderace fork oil capacity

270mls per leg, or 280 if you want a little stiffer ride

Posted on Jun 19, 2009

ginocussen
  • 216 Answers

SOURCE: Fork oil capacity for a 2005 kawasaki vn1600 mean

Hi Des, Im am Irish too, howya doin? The oil you want is SAE 10W-20. and 445ml if you are changing the oil. It can be more accurately checked with the fork removed and fully compressed and the spring removed, the oil will be 120mm from the top ot the stanchion.
The manual will give you more info on this and any other future problems so here is a link to it. Good luck to ya, and please rate me if I've helped you. Thanks
ginocussen@yahoo.com

VN1600 manual...
http://www.scribd.com/doc/9607829/Kawasaki-VN1600-A1A2-Vulcan-03-Service-Manual-ENG-by-MosuenoPW

Posted on Jul 05, 2009

hawk127311
  • 350 Answers

SOURCE: how much 5w oil goes into each fork?

Using 5w oil with stock springs, your oil level should be about 100mm from the top with the fork fully compressed, damper rod pushed all the way down, and the spring out. I hope this helps and good luck. Please vote and leave a message.

Posted on Oct 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GPZ-1100 1995. Changing oil in engine and fork. How much fork oil to use? And what oil is better to use in engine? Thank you.


level of fork oil is more important than the amount...it should be 120mm from the fork top when fully compressed without the springs.
But if you want an amount then you're looking at 470cc although this will depend on wether the fork internals were stripped and dry before refilling. That's why using level is a better guide.

Engine oil for the 11 is 10w40

Jun 05, 2011 | 1995 kawasaki GPZ 1100

1 Answer

How much oil does each fork take on a 1996 gpz500s


must take the fork out of the t-post. then open the top cover. drain remaining oil. push down top part of the fork until it reaches to the end. put oil leveling the top. pull the top part of the fork again. spring must be inside when filling it with oil.

Apr 18, 2010 | 1996 kawasaki GPZ 500 S - GPX 500 R

1 Answer

Fork capacity on 1991 KX 250


SILKOLENE PRO RSF 5WT or use
SILKOLENE FORK OIL LIGHT
500-MLS OIL EACH LEG

Mar 10, 2010 | 2003 kawasaki KX 250

1 Answer

Fork


it screws into the damper rod in the fork, spin it out with an air gun

Dec 23, 2009 | 1995 kawasaki GPZ 1100

1 Answer

I dont no how much oil to put in my forks


use a 15 weight oil and 270mls per leg

Apr 06, 2009 | 1983 kawasaki Z 250 C

1 Answer

How do i remove the damper rod seat at the base of the stachion,does it tap out.


to remove the damper rod you have to remove the allen bolt underneath the bottom of the fork leg. if you find this just turns try using a wooden broom shank to hold it as you undo the bolt.its best to undo the bolt 1st before you strip the fork springs out. hope this helps

Mar 09, 2009 | 1987 kawasaki GPz 1000 RX

2 Answers

How to replace fork dust and oil seals on a kx125


i would do the same as the other post has said, but i would use the old seal to drive the new seal in with a rubber mallet that way you cant damage the fork.

Mar 07, 2009 | 1987 kawasaki GPz 1000 RX

3 Answers

1984 Kawasaki GPz1100 (ZX1100-A2) Repair


The anti-dive valves are easy to remove...
Place the bike on her center stand, and raise the front wheel with a jack under the front of the engine/exhaust.
first loose the 3-way connector on the lower fork part ( brakefluid ).
Remove the 2 screws that hold the upper part of the anti-dive system to the lower part. You'll see the plunger. When braking, that plunger should move about 2mm out. It must be possuble to push it back in place with fingerpressure. Then that part of valve is OK. All the parts of the plunger are separately available by a Kawasaki dealer.
The lower part of the ADVS is also easy. Just remove the 2 screws holding them to the fork tubes. The fork oil will drip out...
When reassemble, dont forget to bleed the brake hoses at the top of the plungers...
To remove the springs...
Loose both screws on the upper fork clamps.
Remove the rubber stops on the air valves
Bleed the air out of the fork pushing the air valves ( some have only 1 air valve, and an equilibration tube just below the upper fork clamp )
Remove both fork spring stops. Caution, hold them firmly down while unscreing, to avoid the stops jump away at the end of the thread!
On reassembly, the stops must be screwed at 2.3 DaN/m (17 lbf/ft ).
The quantity of oil is exactly 348cm³ in each fork. Must be filled without the springs. Push then the fork several times up and down to pump the new oil in all the valves. Then with the fork down, measure the hight between oil level and top of fork. That must be 379mm.

Hope this all helps...
Don't know about an air valve at the bottom of fork tubes...

Feb 06, 2009 | 1995 kawasaki GPZ 1100

3 Answers

Fork oil capacity


Front Fork Oil cc (right leg) : 485 Front Fork Oil cc (left leg) : 495

Nov 10, 2008 | 1999 Honda CBR 1000 F

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...