Question about Motorcycles
It clicks once when i press start button also i just got it?
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
HMMM ! not real familiar with this model,but first of all you'll need to get yourself a key cut by taking the serial number from the ignition barrell and your model /year number to a locksmith.Then charge the battery to full.then you'll need to find out if the charging system is working.Quickest way to do this is take a static and a live reading of battery volts accross the battery with a multi-meter the live reading should be a tad more than the static reading. Also it`s possible that you may have disloged some dirt/grit from the intake when you spayed carb cleaner and it has blocked one of the low speed air jets or pilot jet.......Good luck ..KEN from NAIDIA....HHHHHEEEEEE!!!!!! ......Flabbycat
Posted on Apr 19, 2009
SOURCE: Trouble starting RM 250
i got a 2000 rm 250 and it used to be a cow to kick over i used to spend at least 20 min kicking to start it until i rebuilt the top end with a new piston and rings now it starts on the fourth or fifth kick if that doesnt help you need a new cpu good luck!!!!
Posted on Jun 23, 2009
Pull the fuel hose off to see if fuel will run out when the fuel tap is 'on'. If nothing, check the tap filter screen for plugging and clean it with spray carburetor cleaner. If you get fuel to run out, try checking the float needle in the carburetor for sticking.
Posted on Feb 02, 2010
Try shorting out the 2 10mm nuts on the starter relay (has the lead from the battery and starter going to it) if the the engine turns over chech the relay or safety switches. It will flash so make sure the is no open fuel. If nothing happens try tapping the starter motor l(lightly) then try it. If this works the brushes in the starter are worn out..Dont keep on doing it as you will burn the comutator in the starter..Brushes are cheap.
Posted on Jul 03, 2010
I don't have a solution but I do have the exact same problem, '03 or '04 (not sure) Suzuki 250 Quadrunner Ozark,really low hrs, left in storage for 2.5 yrs, gas went bad, cleaned it out, now hard to start and won't idle by itself.
I have taken the carb apart and cleaned it out, but did not replace anything, and it will still not start very easily or idle. Before I took the carb apart I thought it was flooding because it would start with the accelerator wide open, but when I would let off, it would die again. Whats going on?? I really don't want to pay to have it fixed.
Posted on Oct 12, 2010
Tips for a great answer:
Aug 25, 2016 | Suzuki 2004 Ozark 250
Sep 04, 2014 | Motorcycles
Aug 18, 2014 | Suzuki 2009 Ozark 250
Feb 02, 2014 | Suzuki Motorcycles
Jul 23, 2013 | Motorcycles
Nov 30, 2010 | 1990 Suzuki Rg 250
Oct 11, 2010 | 2004 Suzuki RM-Z 250
Oct 06, 2009 | 2005 Suzuki RM 250
70 people viewed this question
Usually answered in minutes!