Stored in garage over winter.battery fine - plugs clean. all wiring seems fine. killswitch not turning engine over . nothing happening at all. HELP
Without the fairings the plugs should be pretty accessible. Get a new set of stock plugs from the dealer. Since you are already there anyway, have them show you how to install the new plugs.. Talk to them about the starting problem and get their thoughts.
All the more reason to visit the dealer. Since you are new to bikes, ask them to show you the owner maintenance that you should be doing. Don't be bashfull. ask them " Where is that part? How is that done? How can I tell if I need to get a new part? " They will be glad to give you an education on the simple stuff.
Please rate this solution. Thanks!
×
313 views
Usually answered in minutes!
ALL FUSES ARE FINE CHECKED ALL WIRING THE BAS IS HOOKED UP AND WORKING FINE ONLY PROBLE IS WHEN I TURN THE KILL SWITH TO ON TO START THE BIKE I DONT HERE THE ENGINE PRIME OTHER THEN THAT THE BIKE TURNS OVER AND CRANKS NO PROBLEM CHECK EVERYTHING I WAS TOLD TO BUY OTHER PEOPLE EVERYTHING WORKS FINE IT JUST WONT FIRE UP I EVEN CHECKED THE FUEL CUT OFF JUST INCASE I UNPLUGGED IT WHEN I TOOK OFF THE FAIRINGS BUT STYLL NOTHING IT WAS STYLL PLUGGED IN BUT WONT FIRE UP
NOT BEING FAMILIAR WITH THIS BIKE . WHAT IS THE BEST WAY TO GET TO THE SPARK PLUGS ?
please excuse if some of these questions sound foolish. this bike was bought as a first bike and had no manual and owner since moved away. so we are working a little blind on the problems
Have you checked for spark?
Check the fuses by the battery
×