Question about Motorcycles

1 Answer

R1 wont start

Helle i gess i have electric problem with my 2003 R1 i changed the disc of the engin clutch then i try to start the R1 it dosen't wont. so i have the engin light when i push the start botton more the nutral light don't light when the bike is on the 0 gear. the starter do a strange sound like when you turn the key it do a sound of petrol transmission so when i push the start botton it do the same sound...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Motorcycles Master
  • 12,223 Answers

See this steps and fix it. God bless you


User Control and Display Board

If the washer won't start, the user control and display board may be defective. Check for power to the washer first.


Enter your model number to see parts for your washing machine.
Help me find my model number


Timer

If the washer won't start the timer might be defective. This part is often misdiagnosed, check other components before replacing this timer.


Enter your model number to see parts for your washing machine.
Help me find my model number


Line Fuse

If the washer won't start the line fuse might have blown.


Enter your model number to see parts for your washing machine.
Help me find my model number


Thermal Fuse

If the washer won't start the thermal fuse may have blown. It can be tested for continuity. Watch our fuse testing video for more information.


Enter your model number to see parts for your washing machine.
Help me find my model number


Line Fuse and Holder

If the washer won't start the line fuse might have blown, or the line fuse holder might be damaged and need to be replaced.


Enter your model number to see parts for your washing machine.
Help me find my model number


Main Control Board

If the washer won't start the main control board might be defective. This is not common. Check other parts and causes first.


Enter your model number to see parts for your washing machine.
Help me find my model number


Door or Lid Latch Assembly

If the washer won't start the lid switch assembly might be defective. This is a very common problem. The lid switch assembly can fail either mechanically or electrically. Test any electrical switches with an Ohm meter for continuity. The switches should have continuity according to their design.


Enter your model number to see parts for your washing machine.
Help me find my model number


Door Lock Motor and Switch Assembly

If the washer won't start the door lock assembly should be checked. The door lock can fail either mechanically or electrically. Test any switches on the door lock with an Ohm meter. The switches should have continuity according to their design.


Enter your model number to see parts for your washing machine.
Help me find my model number


Incoming Power Problem

If the washer won't start check to see if there is power at the electrical outlet which the washer is plugged into. Plug a lamp or radio into the outlet to check it. If the outlet is dead, check the circuit breakers or fuses for the home.


Power Cord

If the washer won't start, check to be sure there is power to the electrical outlet for the home. If that is OK, the power cord itself might be defective. This is rare. You can check the power cord with an Ohm meter for continuity.

Posted on Jul 21, 2013

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 200 Answers

SOURCE: yzf r1 03 gear prob or?!

Sounds like bent shifting fork which is expensive. If you are not the 1st owner then you don't know how previous owner treated bike. Often sportbikes are rode hard and banged into 2nd gear which can eventually cause tranny problems like bent shifter fork. First look down by the shifter pedal and inspect that it is fastened securely to the shift rod coming out of the engine/trans case. There is a single bolt that holds the shift lever on a splined shaft and can come loose and cause problems.
If that is ok then find a local mechanic you trust....Good Luck !

Posted on May 08, 2009

  • 190 Answers

SOURCE: No electric to start YZF R1 motor bike,

check kick stand safety switch is working proper

Posted on Jul 15, 2009

  • 921 Answers

SOURCE: Ignition, electrical noise

does it have a fuel pump ?...it could be just priming itself..when the pump is already full you cant really hear the noise that much. Does the noise go away after riding for awhile and then restart it?

Posted on Sep 29, 2009

dstrickla263
  • 2 Answers

SOURCE: 1999 R1 won't start

Bad starter Solenoid is the info Im getting on my cb360 (its doing the same thing)

Posted on Jul 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 Yamaha R1 it will not turn over


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter control circuit, relay, or solenoid faulty.
11. Main fuse or circuit breaker may be blown or faulty.
12. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
13. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/323828-battery-charged-bike-still-wont-start.html
http://www.r6-forum.com/forums/57-garage-mechanical-help/162715-will-not-start-good-battery-no-clicking-but-no-turn-over.html
http://www.r6-forum.com/forums/57-garage-mechanical-help/162715-will-not-start-good-battery-no-clicking-but-no-turn-over.html
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Mar 17, 2015 | 2000 Yamaha YZF-R1

1 Answer

2003 r1 over heating


Hi, Smokedatkill and the usual suspects are:
1. Low coolant level.
2. Restricted radiator air flow.
3. Faulty thermostat.
4. Coolant pump or fans inoperative.
5. Vent hose crimped.
6. Air in the coolant and needs bleeding.
7. Engine idling too long or bike moving too slow.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/103-02-03-r1-mechanical-help/236527-2003-r1-overheating-help.html
Yamaha YZF R1 DIY Repair Fix Tips
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Mar 25, 2013 | 2003 Yamaha YZF-R1

1 Answer

I have power to everything but wont turn over/start?


Hi, Heather and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/323828-battery-charged-bike-still-wont-start.html
http://www.r6-forum.com/forums/57-garage-mechanical-help/162715-will-not-start-good-battery-no-clicking-but-no-turn-over.html
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 11, 2012 | 2002 Yamaha YZF-R1

1 Answer

Fan dosen't come on when bike gets hot yzf r1 2000


Hi, Tom for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Overheating problems on 99 R1
R1 Overheating what could be the reasons
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

May 29, 2011 | 2000 Yamaha YZF-R1

1 Answer

2003 yamaha r1 clutch install instructions


Hi, Tom for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/46-how-tos/163907-how-install-clutch-02-03-a.html
R1 Clutch Replacement wmv
https://r1videos.files.wordpress.com/2011/04/2002-2003-yamaha-r1-service-manual.pdf
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jul 29, 2010 | 2003 Yamaha YZF-R1

2 Answers

Yamaha r1 2007 showing false hi and wont start


did you mean FI light?? start with the switchs side stand, neutral and clutch. if any are not working the bike won't start. hope this helps
Mark
C.C. Motorsports

Feb 20, 2010 | 2008 Yamaha YZF-R1

2 Answers

Yzf r1 03 gear prob or?!


Sounds like bent shifting fork which is expensive. If you are not the 1st owner then you don't know how previous owner treated bike. Often sportbikes are rode hard and banged into 2nd gear which can eventually cause tranny problems like bent shifter fork. First look down by the shifter pedal and inspect that it is fastened securely to the shift rod coming out of the engine/trans case. There is a single bolt that holds the shift lever on a splined shaft and can come loose and cause problems.
If that is ok then find a local mechanic you trust....Good Luck !

May 08, 2009 | 2003 Yamaha YZF-R1

1 Answer

Changing yzf r1 frame


you wont get one, you just have to figure it out as you go. start by stripping all your bodywork off and removing the engine, then the front forks rear wheel and wiring harness. then replace it all on your new frame. keep your work area clean and tidy, mark all electrical connections you have to undo with tape and write on it where they re-connect to.
good luck

Mar 31, 2009 | 2003 Yamaha YZF-R1

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...