Question about 2004 Yamaha YZ 250
I can shift down into 1st, and up into neutral, but cannot go any further. Has anyone seen this before?
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
1996 YZ250 has shifting problems won shift past neutral Yamaha 2 Stroke
YZ250 transmission issue
YAMAHA YZ250 LC Owner Service Manual
OEM parts for Yamaha
Posted on Jul 24, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
May be possible that clutch is disengaging when shifting to first and/or drive not fully switched into first gear. Your 1st gear light may be lit, but actually isnt in a ready state.
Posted on Feb 28, 2009
You have a bent shift fork. The repair means taking the engine out of the frame then removing the top end, removing the flywheel and electrics, removing the clutch , shift mechanism and kick starter and a few other parts. THEN you are ready to split the gearbox to remove the gears and crankshaft and then the shift drum and bent shift fork. Next you get to put it all back together. This is a pretty big job for the home mechanic.
You will need an impact driver, flywheel puller, case splitter and torque wrench plus the normal screwdriver, pliers, etc.. Alternate to the special tools is taking it to the dealer and say "Fix it".
I normally tell people to take it to the shop just so they don't get into such an involved project.
Free service manual PDF download at > http://www.carlsalter.com/motorcycle-manuals.asp
Please rate this solution. Thanks!
Posted on Apr 19, 2009
SOURCE: 2005 yz 250 shifting problems
Well. I'm a motorcycle mechanic and my 2004 RMZ 250 recently did the same thing, The Shift forks inside my transmission actually bent and were not moving the gears as far as they needed to go and eventually got to where it quit shifting all together, recently also repaired a CR 125 That wouldn't shift at all and it was the shaft the shift forks go on was bent and hung the shift forks. Sounds like your shift forks are bent to me though.
Posted on May 06, 2009
low the idle speed at1150 r.p.m the gable at 7mm free play and change the oil with a sae 15-50 of IGOL roadster OR IPON 4000 or DENICOL tehno syn
Posted on Jul 07, 2009
SOURCE: Yamaha Raptor Shifting
Well, it seems like there is a problem with the shift return spring; it's on the backend of the gear, Seems broken or not attached properly, so first of all do this check.
Posted on Jul 08, 2009
Tips for a great answer:
Feb 24, 2015 | Cars & Trucks
Apr 01, 2014 | 2003 Yamaha YZ 250
Mar 11, 2011 | kawasaki KX 250 Motorcycles
Jul 27, 2010 | 2000 Yamaha YZF-R1
Sep 02, 2009 | 1998 Buick Century
Apr 01, 2009 | 2000 Chevrolet Silverado
Feb 09, 2009 | Harley Davidson Harley-Davidson Motorcycle...
123 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: