Question about Motorcycles
I have NO headlights or running lights. turn signals work and break light works.. i can not figure this out HELP!
Have you checked all the fuses?
Posted on Jul 20, 2013
Testimonial: "i checked 2 fuses. that is all i can find.. one by battery and one under the seat by the engine. and both are good. unless there are more some were?!?!"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Check the rear bulbs.If they are working (brakes+lights) check the wires.For the turn signals, override the flasher relay.If they are coming on then you need to replace the relay.If not then check the left hand side clip on switch.
Posted on Jun 04, 2009
Does the brake light work with the front brake lever. Sounds like wrong type of bulbs in there or bad turn signal flasher...Do the lights light up when you hit the switch and just stay lit...Also i can tell you that mine had to have the bike running in order to create enough amps to even make the flasher trip. I eventually put bigger bulds in each turn signal to draw more so they work with it running or not. It had 2156 bulbs in and i put 2157. Oh the flasher unit is under the fuel tank.
Posted on Sep 20, 2009
Look for a bad ground connection inside the headlight shell (or possibly elsewhere). The other thing that all of the items you mention that are working intermittently have in common is the ignition switch. With the switch 'on', check for battery voltage at the fuses for the headlight, turn signals, horn, etc. No voltage at the fuses likely means a bad ignition switch.
Posted on Nov 05, 2009
Testimonial: "quick response to my posted problem. don't know yet if that's the problem, but i've got a good place to start looking. thanks for the help."
have you changed the flasher relay to run led indicators if not you will need to you cant run standard bulb indicators and led together. and with the brake like sounds like pulling on the cable when on lock causing switch to stay on check that location of the wiring is correct and sufficient freeplay
Posted on Dec 16, 2009
Tips for a great answer:
Sep 14, 2016 | Keeway Motorcycles
Sep 07, 2012 | Subaru Legacy Cars & Trucks
Jun 12, 2017 | 2009 Keeway Hurricane 50
Jul 31, 2011 | 2009 Keeway Matrix 50
Dec 10, 2010 | 2001 Ford Explorer Sport
Mar 05, 2010 | 2008 Keeway Matrix 150
Mar 10, 2009 | 2004 Chevrolet Tahoe
88 people viewed this question
Usually answered in minutes!