Question about Triumph Bonneville Motorcycles

Open Question

Bonneville wiring harness routing question

OK so here is what happened. My 2001 Bonneville caught on fire. Thanks to a handy fire bottle the damage was not to bad. I have replaced the carbs and the airbox. I am working on the new wiring harness, however I have ran into to some trouble. Because of the melting of the harness I was unable to take pics of how the wiring harness was routed through the bike. The area around the airbox is where I am having most of the trouble. If someone has any pics of how the harness is routed I would be most grateful. Thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 611 Answers

SOURCE: 2000 pontiac bonneville wiring harness

u can get one to use out of a srvice book at the libruary

Posted on Jun 15, 2008

  • 1596 Answers

SOURCE: NEED TO ROUTE SERPENTINE BELT AROUND SEIZED AC PULLEY ON 2001 TAU

Some Parts Stores Have A/C Bypas Belts you should call around

Posted on Jan 28, 2009

ewashmidas
  • 362 Answers

SOURCE: 1999 pontiac bonneville ssei supercharged belt routing diagram

This is the one for the supercharger.

b0520da.png

Posted on Mar 14, 2009

SOURCE: 1986 Kawasaki Ninja won't fire

Theres fuel starvation, the carbs are not getting required fuel in other words the float chambers doesnt get the correct amount of fuel .
Check the fuel flow from the petcock to the carburators.
Check the float pin and adjust accordingly to get the right level inthe float chamber of each carburator.
Hope this helps!

Posted on May 23, 2009

  • 7 Answers

SOURCE: I need to replace the carbs on my '82 Suzuki GS650L

of course they want you to buy new carbs these can be taken apart and cleaned the floats should be weighed to make sure they havent gone bad carb cleaner does miracles to gummed up carbs.

Posted on Jun 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 Pontiac Bonneville I replaced bad hubs what do I have to do to get trac off antilock and brake lights to go off


check to make sure you reconnected the ABS connector to the hub bearing connector and inspect for damage to the plug or wiring.

Apr 24, 2015 | 2001 Pontiac Bonneville

1 Answer

1998 pontiac Bonneville codes p0171 what should I do first to fix this


DTC P0171: Bank 1 system too lean. Probable cause:
1. Wire harness fault. Check for correct voltage, open, short to ground, short to voltage
2. Fuel pressure problem. Check pump, regulator, filter, and lines
3. Exhaust leaks or restrictions
4. Vacuum leaks. Check for damaged hoses or incorrect routing
5. Fuel contamination
6. Incorrectly installed sensor

Jul 22, 2014 | Cars & Trucks

1 Answer

Where are the fuses located for the air conditioner in a 2001 pontiac bonneville


The interior fuse box in a Pontiac Bonneville is underneath the backseat on the driver's side.

To remove the rear seat cushion:
1. Pull up on the front of the cushion to release the
front hooks.
2. Pull the cushion up and out toward the front of
the vehicle.

To reinstall the rear seat cushion:

1. Buckle the center passenger position safety belt, then
route the safety belts through the proper slots in the
seat cushion. Don't let the safety belts get twisted.
2. Slide the rear of the cushion up and under the
seatback so the rear - locating guides hook into the
wire loops on the back frame.
3. With the seat cushion lowered, push rearward and
then press down on the seat cushion until the spring
locks on both ends engage.
4. Check to make sure the safety belts are properly
routed and that no portion of any safety belt is
trapped under the seat. Also make sure the seat
cushion is secured.

Notice:
The battery and main fuse blocks are located
under the rear seat cushion. The battery's ground
terminal and some relay wires are exposed.
To help avoid damage to the battery and wires,
be careful when removing or reinstalling the seat
cushion. Do not remove covers from covered
parts. Do not store anything under the seat, as
objects could touch exposed wires and cause
a short.

Jul 22, 2014 | 2001 Pontiac Bonneville

1 Answer

2001 Triumph Bonneville wiring diagram


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Triumph, despair not, for a mere $10 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2001 Triumph Bonneville wiring diagram Google Search
Bonneville 2013 wiring diagram
Triumph Bonneville 2001 2007 Workshop Service Repair Manual Download... $10 cheap
http://www.triumphestore.com/
Triumph Bonneville Owner Handbook Manual

May 15, 2017 | 2001 Triumph Triumph Bonneville

2 Answers

Can i fuell inject my 2001 triumph bonneville


yes, but it would be several thousand dollars with all of the parts and labor. these require feedback from sensors, a high pressure fuel pump, a different wiring harness, and plenty of other parts that are very expensive.

Jan 12, 2012 | 2001 Triumph Triumph Bonneville

1 Answer

97 bonnefire...can anyone tell me the spark plug


go to google type in 1997 Bonneville spark plug firing order and there will be a list of choices to choose from

Jun 30, 2010 | 1997 Pontiac Bonneville

2 Answers

2001 pontiac cowl pack not fireing.


Here is a diagram of the firing order for you 3800 engine. Cylinders 1 and 4 are misfiring because the operate under the same "Coil Pack" and the coil pack has unfortunately gone bad. O'Reilly sells them for between $30-50 depending on the amount of warranty coverage you want. To replace, simply unscrew the screws that hold the coil pack in place. WAIT before unplugging the plug wires. Place the old coil pack and new coil pack next to each other, unplug one plug wire, then plug it to that same port on the new coil pack. then do the same for the other plug wire. Then screw your new coil pack in place, and start you car. should run fine!

3098a58.jpg

Sep 24, 2009 | 2001 Pontiac Bonneville

1 Answer

2000 pontiac bonneville wiring harness


u can get one to use out of a srvice book at the libruary

Jun 14, 2008 | 2000 Pontiac Bonneville

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...