Question about 1998 Yamaha YZF 600 R thunder cat

1 Answer

Need advice on how to lift or drop my engine from my 1998 thundercat

I have removed everything from engine. Just need advise on how to get the sucker out. Any help would be appreciated.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 49 Answers

Bit awkward on your own if you have paddock stand or centre stand does make it easier when i changed engine on my cbr 600 i left the rear bolt till las although did loosen it with a low level jack underneath with kneeldown mat protecting engine peice of soft wood would do as long as large enough to go underneath remove bolt from rear engine should still be tight in position prize slightly forward till moving gradually lowering on jac keeping it balanced when free from frame will still need manhandling away from bike

Posted on Jul 13, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove oil pan for 1998 gmc jimmy 4.3?


You will need an engine lift remove engine mount bolts lift engine high enough to remove pan,or remove transmission

Aug 31, 2014 | 1998 GMC Jimmy

1 Answer

Oil Pan Gasket Replacement/ Oil Pan removal


yes the starter does have to be removed but also the engine mounts must be also as the engine must be raised about 10 " to get the pan out. if you do try this make sure you have very very sturdy jack stands for the engine to just a jack as the jack will lift it but wont maintain it long enough to safely remove the pan and reinstall it......good luck and be very carefull

Aug 11, 2014 | 1998 Oldsmobile Silhouette

1 Answer

Hi guys, my bike keeps cutting out if i put lights on or press the brakes front or rear. bike starts and idles fine. totally stumped and any help would be great


  1. Yamaha Fazer Engine and Transmission
    • The 1998 Fazer is powered by a four-stroke, 16-valve, in-line, four-cylinder engine with displacement measuring 36.55-cubic inches. This motor generates 95 horsepower at 11,500 rpm and 45.0 foot-pounds of torque at 9,500 rpm. It has a six-speed transmission and a liquid cooling system. The 1998 Fazer has a top speed of 139.8 mph.
    Yamaha Fazer Brakes, Weight and Fuel Capacity
    • The 1998 Fazer has dual-disc front brakes and single-disc rear brakes. It has a seat height of 31.1 inches at its lowest setting and a dry weight totaling 416.7 lbs. The Fazer has and electric starter and a fuel capacity of 4.75 gallons.
    Yamaha Thundercat Engine and Transmission
    • The 1998 Thundercat is powered by a four-stroke, 16-valve, in-line, four-cylinder engine with a displacement of 36.55-cubic inches. It generates 100.00 horsepower at 11,500 rpm and 48.7 foot-pounds of torque at 9,500 rpm. The Thundercat has a six-speed transmission and a liquid cooling system.
    Yamaha Thundercat Brakes, Weight and Capacity
    • The Thundercat has dual-disc front brakes and single-disc rear brakes. It has a dry weight of 412.3 lbs. and a seat height of 31.3 inches at its lowest setting. The 1998 Thundercat has an electric starter, a 5.0-gallon fuel capacity and a top speed of 158.4 mph.

Jan 14, 2013 | 2003 Yamaha FZS 600 Fazer

1 Answer

Engine blown need to replace


Go to auto parts store and buy a repair manual. Basically you will have to drain the antifreeze and remove the radiator. Remove everything that gets in the way of lifting the motor from the truck which probably includes the alternator, starter, etc. take the transmission out. Get a motor pulling lift and attach a chain to the motor. Remove motor mounts. Make sure that everything is removed from the motor that has wires running to the body. Lift motor from truck.

Aug 16, 2012 | 1998 GMC Sierra

1 Answer

Yamaha Thundercat 600 front axle torque spec


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.yzf600r-usa.com/maintenance/torque_specs.html
torque spec on front axle
http://www.thundercat.nl/index.php/download/category/2-manuals
OEM parts for Yamaha
YAMAHA YZF600R Owner Manual

Aug 05, 2012 | 1998 Yamaha YZF 600 R thunder cat

1 Answer

Fuel pump removal on 1998 dodge grand caravan sport


the fuel pump is in the fuel tank you can drop the tank from the underneath or lift the carpet and see if theres an access panel there will be a lock ring that can be removed with a hammer and flat screw driver then everything slides out. reverse the order to install the new one

Jul 14, 2012 | 1998 Dodge Caravan

1 Answer

How do you get the engine out ? Will it come out the engine bay ? Or do I have to drop the subframe ?


I had a Dodge Grand Caravan for several years. I loved almost everything about it. Except the lack of engine compartment space to work in. You can bring the engine out the nose but everything must come out and off to do so. If you can get it on a lift and drop the engine, that will save you some time and effort, unless you run into trouble removing the exhaust systems and the cross supports under the engine. Snapping bolts and having to cut the exhaust out and so having to replace the exhaust is a common ordeal. I did manage to change the plugs on the far side of the engine with out pulling the engine out....but it was a ridiculous amount of finagling and my arms were bleeding quite a bit once it was done. What are you needing to remove the engine for?

Jun 20, 2011 | 1998 Plymouth Grand Voyager

1 Answer

How tu tune up a 1998 yamaha yzf 600 thundercat


sir, if you mean to increase its engine power..then first change its normal plugs to laser iradium,change its ordinary engine oil to fully synthtic,change its stock air filter and oil filter to k&n filters for more power then put a power commander and msd ignition coil..thanks

Apr 29, 2011 | 1998 Yamaha YZF 600 R thunder cat

1 Answer

I need to replace the starter on a 1992 Chevrolet Camaro RS with a V8 engine. Can you give me directions?


Remove neg battery cable. Then lift car up. Mark with tape or marker the wires connecting to starter/ solenoid. Then remove the two cables.
Then remove two bolts from starter and drop down or pull up by exhaust manifold if you cannot drop down through bottom.

Go to www.autozone.com and register for full free online repair manual with everything you could ever need for any vehicle

Sep 09, 2009 | 1992 Chevrolet Camaro

2 Answers

Pulling an oil pan on 1998 grand am


The worst part will be either lifting the engine to the point that it clears obstructions, or to remove the obstructions, or both. Lifting the engine requires that you disconnect the motor mounts and who knows what else. Once everything is out of the way you can drop the pan. I hope this helps.

Nov 29, 2008 | 1998 Pontiac Grand Am

Not finding what you are looking for?
1998 Yamaha YZF 600 R thunder cat Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...