Question about 1996 Suzuki VS 1400 Intruder

1 Answer

Starter won't work but horn, lights, ect. could it be bad ign. switch?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Sounds like an in-line fusable link. Check manual or car dealer and ask for location. If you find it, use a test light to check for voltage on both sides of link.

Posted on Jul 11, 2013

2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 14 Answers

SOURCE: Getting electrical power but not

tare apart the relay and clean points with sand paper

Posted on May 07, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Misabishi verada, all lights horn ect work but wont kick over

You need to find out id your ign switch is sending 12v electrical to the starter.. There ia large post with the positive battery cable attached to it and a small post which is the wire from the ign switch connects.. run a wire from a postive source like the battery cable to the small post.. if the engine cranks you will know the starter is good and its not getting a 12 single from the ign switch. Post a comment and let us know what you find.

Jun 04, 2014 | 1996 Mitsubishi Eclipse

1 Answer

2002 chevy impala won't start if I jump starter

Is the security light on or flashing ?
The yellow wire goes from the key switch to the neutral safety switch, then to the starter. So bypassing the neutral safety would make the starter crank the engine, but would have nothing to do with the rest of the engine.

May 27, 2013 | Cars & Trucks

1 Answer

Intermittent starter won't engage on mercrusier7.4 1988 boat engine

might be a burned spot on the starter contacts where the brushes power the motor.
tap the starter to see if problem goes away.
sometimes you can clean the contacts but that is a temporary fix.

Mar 11, 2013 | Cars & Trucks

1 Answer

Car won't start

If it does not crank, it could be a bad connection between the battery and starter, a faulty neutral safety switch, anti-theft system problem, or a faulty key switch. Not to mention a faulty starter.
If it cranks but does not start, you would need to know if it has spark, fuel, and normal compression.

Jan 22, 2013 | 1990 Lincoln Town Car

1 Answer

Injectors won't inject on 1995 Chevy Silverado

Check for a bad ignition fuse, ign module, or computer connections or computer.

Dec 07, 2012 | 1995-1997 Chevy 1500 Truck Ignition...

3 Answers

2007 grand prix won't start but lights and horn work

Your battery is to low on power it needs a good charge, or replace it is the best option for a brand new one!

Feb 27, 2012 | 2007 Pontiac Grand Prix

1 Answer

My car won't crank, lights work, horn blow and

Starter not turning over?
Controlled by integrated starter selenoid. SOMETIMES, tapping the starter will cause the selenoid to operate.
Assume that voltage (12Vdc) is getting to the starter when the key is in the start position (take 2 people and a voltmeter to check it).

Dec 15, 2011 | 2008 Dodge Charger

1 Answer

94 GMC won't start, lights & horn work. Also pulled starter and had it tested, tested OK.

If your starter and battery are both good chances are your ignition switch is bad and will not allow power to your starter. If your replace the switch it should solve your problem. I hope this helps and if you have any other questions please feel free to ask.

Sep 19, 2011 | 1994 GMC Sierra

2 Answers

I have a 07 Honda vt100 shadow spirit... Ran fine yesterday I parked it for about 3 hours.. When I went to start the bike later I pushed starter switch and NOTHING not even a sound.. Lights blinkers horn...

you may want to check the safty switch on the kick stand. if it is falty then it would not let the bike start. it would let everything else work though. make sure it is in neutral

Sep 02, 2009 | Honda VT 1100 C Shadow Motorcycles

1 Answer

03 protege does not crank when started

check ign. fuse,if ok,check elect. connector at starter selenoid, the plug on conn.for corrosion,usually its that!the starters on those models are usually long lasting!

Mar 26, 2009 | 2003 Mazda Protege

Not finding what you are looking for?
1996 Suzuki VS 1400 Intruder Logo

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides