Question about Benelli Velvet 125 Motorcycles

1 Answer

Wards Riverside Battery assistance

I have a 1968 Wards Riverside 125cc. I need to find a battery. I know the dimensions and that is it a 6 volt. Does any one know the amp for the battery?

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 33 Answers

Have you ever started the bike before? do you know what it sounds like when it turns over, last resort if someone else doesn't answer, find a 6v bat that fits in the housing, as long as your not cranking for more than a couple of seconds you'll be fine and it will give you an idea of whether or not the bat you got is in the range of amps required by how fast it is spinning the bike over. but remember no more than a couple of seconds unless it sounds like its turning over at a normal rate. best I can give you sorry.

Posted on Jul 12, 2013


4 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 10319 Answers

SOURCE: Do i need a 12 volt or 6 volt battery

12 volt

Posted on May 15, 2011

  • 4340 Answers

SOURCE: need to charge battery not

VERY unusual for a 6 volt system, they just do not work. Count the fill holes, usually there will be 6. Think 2 volts each. To be sure, hook up a volt meter and see, but it just HAS to be 12 volts. Been that way forever.

Posted on Feb 18, 2011

  • 623 Answers

SOURCE: I want to buy a battery tender jr and I don't know

More than likely you need a 12 volt model, very few bikes these days have 6 volt systems. I have used a Battery Tender in the past with good results, they do not last forever though.

Posted on May 20, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Timer wiring

Your question lacks details that will compromise my answer. If you are using a battery charger to boost your vehicle, I recommend attaching the positive cable from the charger to one battery and the negative to a suitable ground that is NOT your battery. Four wires? I assume this is for either 24 volts or better cca. Be sure you know if it is a twelve volt system or not. Only attach cables to their corresponding poles. Use 60 amps to boost. 40 and under to charge. If your battery is below 9.6 volts, it is garbage. If it is below 12.6 then it needs to be charged. A proper load test on your battery will determine the state of your battery. Always load test batteries individually.If you have to boost your vehicle frequently, then ther could be other issues you may want to look at.

Aug 21, 2014 | Associated Equipment 6019 Crank Assist 6...

1 Answer

Where is the battery on the motherboard of a Gateway SX2370

As you can see the disk standing up to the right of the memory slots.
will be a 3 volt lithium battery like a CR2025 or a CR2532,
The 2025 or 2532 are only telling something about the dimensions. The batteries are always 3 volts.


Jun 16, 2014 | Gateway SX2370-UR10P Mini-Tower Desktop...

1 Answer

Bike won't rev out

Could be electrical.Bikes that have generator systems need battery induced.Unlike an alternator system,like a car you can jump start and the alternator will run with good spark to fire fuel.Generator type need battery induced,so battery must have correct amperage.Can test battery with a volt or/amp test.See what you have with bike not running,then running need about 20% more volts then the 6 or 12 volt battery states (about 14 volts running on a 12 volt battery.Know your battery life span & know that a new battery that year.Plus generator must keep battery charged.I like to have a good spare and also go for a glass mat battery especially if bike is ridden season related. Good Luck!

May 17, 2014 | 2002 Honda CMX 250 Rebel

1 Answer

How to change a keyless chuck dw958

DEWALT DW958 Power Tool Battery Replacement
  • Type: Ni-MH
  • Volt: 18V
  • Capacity: 3000mAh
  • Color: Black
  • Weight: 1160g
  • Dimension: 136.80x85.43x113.00mm

  • Type: Ni-MH
  • Volt: 18V
  • Capacity: 3000mAh
  • Color: Black
  • Weight: 1160g
  • Dimension: 136.80x85.43x113.00mm

May 05, 2014 | Dewalt 18 Volt Compact Drill Kit

1 Answer

I have a dell dimension xps gen 4 that is several years old. When I turn the computer on I get a msg that the system battery voltage is low. And then windows won't start and I get the BSOD. I'm...

You can download the service manual from this WEB site.

The CMOS battery is a coin size 3 volt lithium battery type CR2032.
Replace this flat battery then go into the BIOS setting and set the Date & time save and exit.
This should fix your problem.

Mar 14, 2013 | Computers & Internet

2 Answers

Looking for a 6 volt battery replkacement for hummer ride on toy

Do a web search for sealed lead-acid battery. There are hundreds of on-line dealers. The three things you need to know for selecting the battery are voltage (6 Volts), Amp-hour rating (must be at least as large as the old battery to get the same time between charges) and physical dimensions (must fit in the battery mount or box). It would be really nice if it has the same terminals as the old battery so you don't have to replace the wiring connectors. You can also search by the model number on the battery - most manufacturers have a cross-reference to competitors' equivalents.
If you have a local Batteries Plus franchise, you may get a better buy there when compared to the price and shipping cost for an on-line order.

Sep 24, 2012 | Cars & Trucks

1 Answer

I have a 1974 yamaha dt 250 need to know if it is 6 volt or 12 volt system

Hi, that will be 6volt, a battery has 2volt per cell, a 12 volt battery will have 6 cells, and a 6vols battery 3, check how many caps your battery has, some of the early dt125 had a 12 volt on the elecctric start, yours should be a yuasa battery 6n4b2a3 check this link, models

May 10, 2011 | Yamaha DT 360 Motorcycles

1 Answer

I want to buy a battery tender jr and I don't know what size to get. I have a 2005 Kawasaki ZZR 600. Do I need a 6 volt or 12 volt charger?

More than likely you need a 12 volt model, very few bikes these days have 6 volt systems. I have used a Battery Tender in the past with good results, they do not last forever though.

May 20, 2010 | 2005 kawasaki ZZR 600 US

1 Answer

I need to buy a have installed a new battery.. Do

There are no authorized Norelco repir centers in your area. You can have this repair done by sending it in to You can read information about this repair and place an order using the link below

Apr 08, 2010 | Norelco 3805 XL Electric Shaver

2 Answers

Repair manual and where to bye parts

you can stat looking here.

google benelli parts

good luck

Apr 11, 2009 | Benelli Velvet 125 Motorcycles

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Benelli Experts


Level 3 Expert

76164 Answers

Frank Richardson

Level 1 Expert

21 Answers


Level 3 Expert

832 Answers

Are you a Benelli Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides