Question about Motorcycles

Open Question

HARLEY FLSTF ALARM ACTIVATES BUT NO SIREN

When i activate security system with fob, motor is immobilized and turn signals flash but there is no audible siren

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
OneRide
  • 379 Answers

SOURCE: Just installed smart siren kit, worked ok for 1

Harley alarms, while a decent alarm system, are notoriously hard to set up. On a new installation I have sometimes had to run the set-up routine 4-5 times. I hope you have an owner's manual and/or good instructions. Keep trying to set the alarm up from the beginning. If you miss a key or time limit it's not unusual to have the set-up fail and you have to start all over. Disconnecting the battery will screw things up, so be careful.

Posted on Oct 10, 2009

Ad
dj_relly999
  • 4070 Answers

SOURCE: security systems alarm goes off when bike is

Hi and welcome to FixYa!

I used to have a client with the same issue. Alarm always triggers and I found out that there's a grounded wiring that's why the alarm always go. Please check for faulty wirings on the bike to resolve the issue. It may be a loosen wire or a burnt wire somewhere.

Hope this helps and thank you for using FixYa! Have a good one!

Posted on Jan 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Flashers won turn off on my flstf 1991


Have you tried to deactivate them?
To Activate
Turn the ignition switch to IGNITION with security system disarmed (fob present, if equipped).
Press the left and right turn signal switches at the same time.
Turn the ignition switch OFF and lock the switch. The four-way flashers will operate for two hours. The security system (if equipped) will automatically arm.
To Deactivate
Have the fob present to disarm the security system (if equipped).
Unlock the ignition switch and turn the switch to IGNITION.
Press the left and right turn signal switches at the same time.

May 20, 2014 | Harley Davidson Motorcycles

1 Answer

Why do lights flash while on trailer on 2014 street glide


The bike senses movement (like someone is stealing it) and activates the "Smart Security System".
You won't have an actual alarm unless you have the optional alarm installed.

You need to put it in "Transport Mode"

In the transport mode, the Harley-Davidson Smart Security System is armed but the motion detectors are inactive.
The motorcycle can be transported on a trailer without activating the alarm while the starter and ignition remain disabled.

Here's a video how:

http://www.youtube.com/watch?v=tA35I8RWI_s

And written instructions:

With an assigned fob within range, turn the ignition switch to IGNITION.
Before the security system lamp goes out, turn the ignition switch to OFF.
Within three seconds, simultaneously press both the left and the right turn signal switches.
After the turn signals flash once, the system enters the transport mode.
With the fob removed, the motorcycle can be moved without setting off the alarm.

May 18, 2014 | Harley Davidson FLHX Street Glide...

2 Answers

2001 harley dyna speedo fuse keeps blowing


Hi Anonymous, you need to track down the short with a test light. For asistance in this procedure please visit websites below:
Harley Davidson Wiring Diagrams and Schematics
Harley Davidson Manuals Mark Workshop
Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...
Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 18, 2014 | Harley Davidson Motorcycles

1 Answer

Alarm


Hi Sam, for more information on your question please visit the websites below and good luck:
How to manually override Harley Davidson Security Alarm
Your Harley Davidson Security System
Harley Security By Pass Secret For Repomen

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e




May 18, 2013 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

I HAVE A 2007 HARLEY DAVIDSON CLASSIC SOFTTAIL. SECURITY SYSTEM PROBLEM. I HAVE REPLACED BATTERY & KEY FOB STILL COMPUTER WILL NOT ALLOW ME ENTRY TO DISARM & WILL NOT CRANK. DID STEP BY STEP OWNER...


If you do not know the security code, you can reset it to your own choosing.
With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Feb 28, 2013 | 2007 Harley Davidson FXSTC Softail Custom

2 Answers

Which type of stator do i order for my 2003 fxdx


when it comes to electrics and harleys always buy the harley davidson oem stator right from your local dealership.

Feb 26, 2013 | 2003 Harley Davidson FXDX Dyna Super Glide...

1 Answer

How does the security system on 2006 sportster work? 1 long click activate & then what do i do to deactivate? just bought the bike & dont know how it works? thank god there is no alarm on it... but...


holding down the button on the fob activates it...signal lights should flash twice
press the fob button twice and the lights should flash once , it is then disarmed

Sep 25, 2011 | Harley Davidson XL 883L Sportster 883...

1 Answer

Alarm goes off on its own..2001 Harley FatBoy


if you have the siren added to the system, there is a special 9volt battery in side the siren unit and it has reached its usable life and needs replacing. if you do not have a siren replace the batteries in the key fobs low voltage on them can also cause a problem.

Sep 10, 2010 | 2001 Harley Davidson FLSTF - FLSTFI Fat...

2 Answers

Security system FOB inactive, battery good, no pin. Need to disarm. What can we try next?


You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.

With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Sep 05, 2009 | Harley Davidson FLSTFI Fat Boy Motorcycles

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4982 Answers

yadayada
yadayada

Level 3 Expert

80339 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...