Four wheeler With a brand new fully charged O.E.M battery installed my 4 wheeler will start and idol excellent but as soon as I take off and hit 4000 rpms the battery light starts blinking on the speedometer panel. What is the problem..... Help

is battery at full charge? is it able to handle the crank power required have battery load tested.
Is it getting fuel?

Hi Jasper:
Have you tried jump starting from another vehicle?
It may be that your battery is just not putting out enough amps.
RV and motorcycle batteries tend to not last as long as car batteries.

"ATV" service and repair manuals - CRXSi.Com

www.crxsi.com/reference/manuals/atv/
.. arctic cat 400 4x4 engine · 04 arctic cat 4x4 400 4 wheeler manual trans startergears ... 2000 2x4 red atv artic cat repair manual · 2000 300 arctic 4 wheeler instructions .... 2007 arctic cat 90 c c four wheeler wiring diagrams · 2007 arctic cat 90four .... Atv Arctic Cat 2010 - Arctic Cat Dvx 300 And 300 Utility Service Manual ...

No it charges the battery only

some four wheelers require a battery to run correctly. sounds like you need a new one.

might need to be charged or new battery

Dead battery or solenoid

Hi

Being in proper adjustment ensures that your clutch is FULLY disengaging when you pull the lever and is fully engaging when you release the lever. This will make sure that it will not slip under acceleration or drag when the lever is in. It will also prolong the life of the clutch, making it last longer.
Also note, normally there is an adjustment at the clutch itself AND an adjustment of the cable to ensure proper free-play on the cable, this is for making sure there is no tension or pressure being applied to the clutch with the lever fully released.

Here is how you can fix your clutch:-

Drain the oil out of the 4-wheeler. This is done by unscrewing the drain plug under the engine. If you have a skid plate obstructing the plug, remove it first. Remove the clutch cover with a socket and ratchet. Inspect the gasket and replace if it is worn, cut or ripped.

Remove the pressure plate by loosening the bolts with a socket and ratchet. Loosen in a crisscross pattern so that the pressure plate comes off easily and won't bind. There are springs behind the bolts, so be careful not to loosen them. When removing the pressure plate be aware of the lifter behind it and make sure you don't lose it. Remove the friction plates from inside the clutch compartment. Remove the jutter springs and make a note of how they are positioned. This will make the reinstall process easier.

Reverse the steps to reinstall. When installing the bolts on the pressure plate and the clutch cover, consult your service manual for the right torque pressure.

Also check this link that will help you to give a detailed idea:-

http://www.ehow.com/how_5831514_use-clutch-wheeler.html

Please get back to us if you have further query else please accept the suggestion.

Thank you for contacting fixya.com

take it back

1. eHow
2. Car Repair & Maintenance
3. Car Oil Maintenance
4. Drain Car Oil
5. How to Repair a Polaris Four Wheeler

How to Repair a Polaris Four Wheeler By Brianna Byrne, eHow Contributor Spark plug inspection and adjustment can be one way to repair a Polaris ATV.

Almost every vehicle needs regular servicing and repairs in order to continually perform at its best, and Polaris' lineup of four wheelers is no exception. The company has released dozens of ATV makes and models throughout the years, ranging from sporty racing quads to youth models to heavy-duty utility ATVs. Despite the differences between the company's many makes and models, general repair tips and troubleshooting instructions remain consistent for all Polaris four-wheelers. The electrical, ignition and fuel systems are some of the most common sources of Polaris ATV problems.

Read more: How to Repair a Polaris Four Wheeler ' eHow.com http://www.ehow.com/how_8074861_repair-polaris-four-wheeler.html#ixzz26pmQIzeh