Hey their im workin on a 95 kaw zx7 an was wondering what are some good sites to go to for help an how to tips an ways that show me the right proceedures in working on a kaw

update to 8 or if problem doing so will need to check with kaw for a compatible app or download

carb may have meetering jet cloged if bike will run on choke only then meetering is faulted

try using windows media player. just go to the top right corner and where ur device is just drag all the photos in there and start sync!
if thats not workin then im sorry dude i dunno.
good luck!

Hello:

You can View this Engine in a Breakdown Form at the Following Site Addy. This will also show you the Part Numbers and you can Purchase Parts from the Site as well.
http://www.emerichsales.com/pages/parts/viewbybrand/default.aspx
Hope this Helps.

Good Luck

Respectfully

John

i try to crank my 93 zx7 the rpm jumps but nothing else?

Take it to the shop. Chances are you do not own an impact driver and this is what you need to do the service work.

Pleas rate this answer.

hey

Im not sure if your clock is digital or not!! i would replace the tacometer cable going from the clock right down to the gearbox!

damien

Check out this link..
http://software.canon-europe.com/products/0010104.asp

Tell me more about the lens- make etc full detail. Check also the Fiji web site for their lens's. Make sure you are attaching the lens the right way round- there is presumably a set of contacts that match the contacts on the body[A connectiviry issue] So far I am guessing but your remark 'See them all over the internet'leads me to wonder if some of this stuff is genuine Fuji or a reputable make.