How to install fender bib on 03 fatboy rear fender

SOURCE: changing rear fender on 2003 fatboy

Here's my 2 cents... you need to remove the seat, saddlebags, disconnect battery, dsconnect the wiring harness, remove the signal lamps and the hardware securing the fender. There are torque values u need to know when installing the new one. This is all in the service manual for your model. I would go to the dealer and get one, you want all the specs correct and thats the only way to get em

SOURCE: I am looking to purchase

They are the same.

SOURCE: fatboy rear fender

2000 and later fatboy fenders will fit anything pre 2000 will not fit

SOURCE: what electrical componant is mounted behind the

Main breaker usually 30 AMP

SOURCE: can i fit an indian chief rear fender on my 98

i hope this helps
5. Brake system alert – the notification is powered on if the ECU detects a problem to the brake system
6. Warning light – it signals an unidentified problem with your car; it usually requires the car to be serviced
8. Tire pressure monitor – the warning is turned on in case of low tire pressure which could raise the fuel consumption or affect the grip
24. Powertrain malfunction – if on, this light shows that the powertrain has been damaged and the car needs to be serviced as soon as possible.