Question about Motorcycles
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Oil type
there usually is not a break in period anymore but when you get your first oil change refer to your owners manual. you did not say where you live but a 10w30 5w30 is recommended most. Always use a Multi viscosity oil like 10w30 the 10 is the viscosity at start up so your engine starts better. The 30 is the viscosity at operating temp. the w means that you can use it in winter. The API that you see on the oil can means American petroleum institute. SAE on the can means society of automotive engineers Viscosity means flow rate and you need to keep oil flowing at all times
Posted on Nov 10, 2008
SOURCE: Gearbox oil change
There should be a drain plug either on the bottom of the gearbox or on the side of the gearbox at the bottom. Put in fresh 10w40 motor oil. There will be an oil fill screw either on the left or right side of the gearbox case.
Posted on Apr 28, 2009
does it crank over?....if so check spark...fuel...etc...try to narrow it down to a actual problem such as carbs clogged, or injector not working, other than wont start, not able to tell much from that.
Posted on Sep 11, 2009
SOURCE: 2008 hyosung wont start
I am assuming you mean with the starter button.
If thats the case check that you have power to the button, and if so powewr coming out of the button.
If all is good this far, check the starter solenoid and starter for operation.
try taking 12v directly to the starter and see what happens..if it turns then the problem is before the starter.
Posted on Sep 11, 2009
It sounds like:
1) One of the wires that takes power to the right hand turn signals is shorted to the chassis.
2) One, or both, of the right hand turn signal bulbs is burnt out.
3) The turn signal switch has failed.
Posted on Nov 18, 2009
Testimonial: "Hey Wayneman, The rear indicator bulb was burnt out. Problem solved. Thanks so much. I really appreciate it :) Cheers, Ross"
Tips for a great answer:
May 04, 2016 | Whirlpool WTW8200YW Cabrio Top Load Washer
Control displaying F1 E5:
There may be a problem with the Oven Control, or the associated wiring.
Power unit down by turning off the circuit breaker(s) for one (1) minute.
Power unit up by turning on the circuit breaker(s).
Monitor the oven for one (1) minute to ensure the error code does not display again.
Verify oven operation.
Oct 23, 2015 | KitchenAid KEMS309BSS Combination...
Thank you for your inquiry, Leanne!
From the information you have provided your Electrolux microwave is displaying an error code of "F1". I am showing that an "F1" error code is not valid. I would recommend resetting your microwave and you can do that by flipping the household circuit breaker off for at least ten minutes. If that does not correct your issue and you continue to experience an "F1" code please reconnect. -Matt
Apr 27, 2015 | Electrolux Microwave Ovens
Mar 16, 2015 | LG LFX25971ST Bottom Freezer French Door...
Jan 17, 2014 | Whirlpool Ovens
Nov 22, 2010 | Microwave Ovens
Jan 08, 2010 | Kitchen Ranges
Jan 29, 2009 | KitchenAid KDRS807SSS Dual Fuel (Electric...
36 people viewed this question
Usually answered in minutes!