Question about 1988 Suzuki GSX-R 750 J

Open Question

Wiring diagram Could you PLEASE send me a colour diagram? Bike don't want to start, think it is a relay problem. Busy doing over the bike. Don't know what colour wiring comes where. Thanks, Deon

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I just bought this bike, it`s my first bike now it

the battery is under the oil cooler directly vbehind the front wheel, behind a black or chrome cover you must remove 2 bolts to remove the cover to access the battery,

Posted on Mar 21, 2010

  • 15 Answers

SOURCE: battery location in the bike

It's in a box on the front of the bike located under the oil cooler (looks like a mini radiator and has two hoses going to it). If you look right under that cooler you should see a metal plate with ribs on it (either 3 or 4 ribs) that's the front plate. Just above that is a plastic lid to the battery box.

The battery cables are routed behind the box. Once you get the lid off (two screws one on either side) you should see the indents for the cables in the lid. The battery terminals face the rear of the bike.

Hope this helps.

Posted on Mar 29, 2010

SOURCE: suzuki Epicuro electric broken

my epicuro 150cc overheats. what's the common reason behind this problem? please help!

Posted on Apr 03, 2010

  • 1508 Answers

SOURCE: How do I know if my starter relay is bad on my 04 Gsxr 1000

Place a volt meter on to the starter side of the relay, It should show 12v or more when the button is pressed, The clicking can be low voltage, so make sure the battery is good and all cable connections are clean and tight. If you put the volt meter across the battery and it drops below 12-11.5 volts when you hit the start button it is probably the battery

Posted on May 05, 2010

  • 191 Answers

SOURCE: I have a 1986 Cavalcade that runs great then

Does it stall suddenly...or start sputtering as if its running out of fuel. The fuel pump stopping shouldn't kill the engine suddenly....each carb will empty and you will lose one cylinder, then two etc.
If its dying suddenly I would investigate your sidestand switch....when the bike you ever find the starter won't immediately crank?

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Kawasaki ninja zx7 wiring diagram

When you say it keeps doing the same thing do you mean the wires keep burning, sounds as though you need to be finding a new wiring loom am sorry, if you carry on riding the bike you will eventually cook all of your expensive charging/and ignition components rendering the bike as scrap

May 20, 2013 | Motorcycles

1 Answer

Harley starter

Hi Anonymous, get out your test light and check the start button for continuity if ok track the wiring to the starter relay and solenoid your contacts could be welded, for a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

May 01, 2013 | 2006 Harley Davidson FXSTDI Softail Deuce

1 Answer

Swap out the stock handlebar. The bike won't start. press on the start button it do nothing. want to check for the ignition fuse but don't know how to get to it. can you help pls

Hi Louie, 1998 and later Sportster models circuit breaker and fuses were located in an electrical bracket behind the starter relay and data link that was mounted behind the left side panel. 1997 and earlier circuit breakers only no fuses were located under the seat and for a free wiring diagram please visit the website below and good luck.Harley Davidson Wiring Diagrams and Schematics

Jul 03, 2012 | 2005 Harley Davidson XL 883R Sportster

1 Answer

Harley Davidson Iron 883 model button start system not working after installing screaming eagle muffler bike is 2 months old

Look at the end of your starter. There's a five-sided plate on the end held on with three small screws. Just above it, there is a single wire plugged onto the starter. Pull this wire off and connect either a test light or a volt meter to the wire. Turn the switch on and press the start button. You should see the light light up or the meter should show battery voltage. If you show voltage at this wire but the starter doesn't run, the problem is in the starter. If no voltage at the wire, your starter relay may be bad. I think the starter relay for your bike is behind the triangular plate on the left side of your bike. The relay is a one inch plastic cube just like the relays on most automobiles. With the switch still on, press the start button. You should feel the relay "click". If it does click, you might want to replace the relay and retest the starter wire. If it does not click, it could still be the relay or it could be the wiring between the start button and the starter relay. Since I don't have a wiring diagram for your bike, you may need to purchase a service manual to obtain one or find it from another source. I wouldn't think the installation of a muffler would have anything to do with the starter operation.

Good Luck

Sep 08, 2011 | 2004 Harley Davidson XL 883 Sportster

1 Answer

Re-wired the 1981 FXWG Harley Davidson Shovel head. There is still no power to anything. Need a wiring diagram.

contact me directly at I think I have a wiring diagram that I'll send you. Don't forget to remind me of what you need and the year and model bike. I get a lot of requests and I can't remember who needs what.


Aug 31, 2011 | Harley Davidson FXDWG Dyna Wide Glide...

1 Answer

I know my model is off but i couldnt find my 1974 in there. Anyway i posted earlier that my 1974 just quits on me while riding. I mentioned i replaced my coil and breaker. That is incorrect. What i did...

Your bike should have the large round relay that only has three terminals on it. There are two larger terminals, one for a large red wire from the battery, and one for a green wire going to the small connector on the starter solenoid. The small connection on the relay is for the wire that comes from the start button. The ground is though the body of the relay where it bolts to the bottom of the battery box. It does sound like a breaker is tripping on your bike. Now, someone may have changed the starter relay on your bike in the past. On your Shovel, there is a chrome cover over the coil on the left side of your bike. Make sure that cover is not loose. If it is, it will drop down onto the top electrical connector of the coil and short the white wire out. This will cause the breaker to trip and shut everything on the bike down. If you need a wiring diagram, contact me directly at and I'll send you one via e-mail as a JPG or GIF picture file.


Aug 16, 2011 | Harley Davidson FXDL Dyna Low Rider...

1 Answer

There are 7 wires from the control unit.All wires are connected except the blue wire with yellow stripe and the bike is not sparking.Can you help please as there is no sign of where the wire should connect...

I don't know the actual colours of the wiring loom, however the diagram linked below shows all the electrical components. Whatever connection the blue/yellow wire has, look for the corresponding male or female connection.


Jun 25, 2011 | Yamaha Agusta F4 SPR Motorcycles

2 Answers

89 Fzr 600 wont start

get ur ignitor unit tested. just a suggestion. good luck

Aug 31, 2009 | 1995 Yamaha FZR 600

1 Answer

I need a wiring diagram for a 2004 motoroma mrx 125.i have changed all relays and still have no ignition.please help.

Anyone know the wiring sequence for the light switch for a direct bikes 125cc scooter? I need to know which colour goes where?

Jul 19, 2009 | 2004 Factory bike Chrono SM 250

1 Answer

82 ya. motorcycle, battery bypassed wiring messed upneed diagram

its a 1000cc i think, and if its been hot wired it will be most likely in the key part of the wiring, Most bikes if you unplug the key wires it will start but have no lights, if you can get me the make and model i can find you a wire diagram and tell you how to hotwire it.

send a buzz on msn ( )

Jun 24, 2009 | 2006 Yamaha DT 125 X

Not finding what you are looking for?
1988 Suzuki GSX-R 750 J Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76164 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides