Question about 2005 Yamaha Majesty 400
When i turn on the key i dont hear the fuel pump hum like i use to/ and the scooter wont start
Posted by Anonymous on
Be sure to check your fuses near your battery on your left side . If you need new ones go to auto parts store. You should get 10 and 20 amps and you will have a couple of extra ones in the fuses box on you bike by the battery. Good Luck
Posted on Jul 05, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: V-Belt flashing
Even although you have just had it serviced, the warning light is triggered by the mileage traveled. So if the belt appears to be Ok, then resetting it has to occur at the point when the indicator comes on. Having said that, I understand that scooter belts can weaken (and break) from internal weakening over time (heat and stress) and not just from external wear and measurement. Over the years I have read about belts breaking (other scooter brands & models) from high use and/or mileage even though they still externally measured within spec.
The "service limit" for the Majesty belt is 27mm (shop manual) or 12,500 miles - so to be safe it should all be interpreted as "replace belt upon the soonest of 12,500 miles or 27mm width"
If they have not replaced the belt in your recent service, then you could perhaps return to them to have it done, or reset the idiot light for you. OR you could do it yourself and see how you go.
If you're wondering where the area that the diagram above is indicating, the reset coupler is the white plastic coupler located under the tailpiece where the battery is located. The rubber strap securing the battery holds it in position and it is the only white coupler in the vicinity of the battery. I also read that you need to have the park brake off to perform this exercise.
I got some of this info from a great site dedicated to your bike. Check it out here. Thanks for using FixYa. A FixYa rating is a grewat reward for my time taken to address this with you. Cheers!
Posted on Nov 13, 2008
your fuel pump suppose to Hum and gently vibrate only when working normally, clacking sound would only mean that it is having a hard time or inconsistently supplying gasoline into your engine. Have it checked and see if any improvement would happen.
Posted on Nov 25, 2008
SOURCE: QUESTION REGARDING FUEL PUMP
simply disconnect the fuel supply line to the carbs,point the fuel pump into a bucket and turn on the key,fuel should start pumping out of the pump,the pump only puts out about 3psi so you should b able to put your finger over the outlet and the pump should stop pumping..hopr this helps
Posted on Jul 04, 2009
The correct term is Throttle Cable. use needle nose pliers to remove it from the grip, take your new cable and run it the same way the old one was ran. follow the old one, then take the old cable out after installing the new cable.
Posted on Oct 20, 2009
Tips for a great answer:
Aug 21, 2017 | 2006 Yamaha Majesty 400
Jan 11, 2017 | Yamaha Motorcycles
Mar 25, 2016 | 2007 Yamaha Majesty 400
Dec 12, 2014 | 2007 Yamaha Majesty 125
Jul 03, 2014 | 2005 Yamaha Majesty 400
Apr 15, 2013 | 2005 Yamaha Majesty 400
Apr 13, 2013 | 2005 Yamaha Majesty 400
Apr 23, 2017 | 2007 Yamaha Majesty 125
Jul 25, 2011 | 2005 Yamaha Majesty 400
Apr 11, 2011 | 2005 Yamaha Majesty 400
803 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: