Question about Harley Davidson Motorcycles
Posted by Anonymous on
Hi Anonymous, take a ride or drive over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary and offer professional advice and assistance concerning your issue. Have a nice day.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Jun 12, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: valve noise 2006 road king
Hello redevil67...This is normal for the HD engine, it going to have valve train, top end noise at some point, some as early as 2000 miles. If you take it to the dealer they will try to sell you on worn tappets...key word here SELL..I've seen this many times, dealer replaces componets, 2000 miles later the noise returns.
These are hydraulic valves and as you probably know they operate at zero lash. Personaly, i feel that the problem is that the cams are not hardened properly or machined incorrectly.. When the leading edge of the cam lobes wear to a strange profile it tends to snap the lifter up in the lifter bore. This causes the rest of the valve train to rattle. You hear the noise on top but the culprit makin it, is the cams..Many chose to go with an aftermarket cam, such as an andrews...Another suggestion, is to switch oils. Don't know what you are useing now, but i'm not a fan of dino oil. As the temperature builds the more an oil is stressed. Lucas full synthetic 20w-50 or Mobil1 15w-50 are both excellent for anti-wear and long term protection.
I hope this helps, please rate me a fixya and good luck with your bike.
Posted on Jul 30, 2009
Your bike's timing can only be adjusted through an interface to your ECM like the Screamin Eagle Race Tuner. Have you made any changes to the exhaust or intake? Have you added and aftermarket item like a Power Commander? changes in these areas could account for the problem you are having. hope this helps.
Posted on Sep 07, 2009
after checking the kill switch on the handle bars and the key. It could be a simple wire or even a computter problem check to see if you have spark if it even turns over, without knowing if it fuel injected or carb its hard to give an exact find or fix. If your not formiluar with the road kings working I would suggest you take it to a harley mech.
Posted on Sep 13, 2009
Try holding your key fob button down for about 20 seconds. This may resync the alarm. If that doesn't work, it's most likely in the speedo. You can try cleaning the speed sensor for the speedo. It is magnetic and picks up metal shavings which short it out. Pull it out of the trans and wipe off the shavings.
Posted on Dec 03, 2009
the oil tank is on the bottom of the transmission in your RK. There are two drain plugs. The plug towards the front left of the pan is the oil drain plug. The other one is for the transmission.
Drain the oil, replace the filter, refill with three quarts of oil and you're ready to go. The dipstick has two marks on it. The upper mark is "FULL HOT", and the lower mark is "FULL COLD". Do not overfill.
Don't forget to service the transmission and the primary at their recommended intervals.
Posted on Jul 26, 2010
Tips for a great answer:
Jul 10, 2012 | 2000 Harley Davidson FLHR-FLHRI Road king
Jun 30, 2011 | 2003 Chevrolet TrailBlazer
Jan 05, 2011 | 2003 GMC Sierra 1500
Dec 21, 2010 | 2004 Chevrolet TrailBlazer
May 27, 2010 | 1997 Buick LeSabre
May 24, 2017 | 2004 Pontiac Sunfire
May 01, 2017 | 1995 Volkswagen Golf
Nov 19, 2008 | 1986 Audi 5000 CS
Jul 09, 2017 | 2005 Pontiac Sunfire
192 people viewed this question
Usually answered in minutes!