Question about kawasaki ZX-6R Ninja Motorcycles

1 Answer

Ninja 600 1997

Spark plug gap

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,799 Answers

Buy a manual, all the information you require to service your bike is in there. But as long as you buy the plugs recommended in the manual they will be close enough to the right spec for your bike.

Posted on May 03, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kawasaki Ninja 250R will not rev past 5000 RPM


Hi, Tyler and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Faulty main circuit breaker and or connections.
4. Faulty ignition coil and or connections.
5. Faulty spark plug, oil or gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator.
6. Faulty spark plug cables, leaking or broken, internal damage check for spark leakage in the dark.
7. Faulty ignition module, switch, CKP, MAP, CMP, sensor and or any connector in the ignition circuit could have corroded, loose, or broken pins/sockets
8. Burnt exhaust valve or air leak in the exhaust system.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bike not wanting to rev past 5k while driving ninjette org
Engine will not rev past 5000 rpm Ex 500 com The home of the Kawasaki...
Kawasaki Ninja 250R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Feb 23, 2017 | kawasaki Ninja 250R Motorcycles

1 Answer

I have a 2007 ninja 600 . I changed the spark plugs and the plugs that came out were gapped twice as much as the sticker says on my bike and what the parts store said. So I gapped the plugs to .28-.32...


the gap should be fine , 0.7 - 0.8 mm (0.028 - 0.031 in.) so id say something else is wrong. might you have put the stick coils plug cap coils on in the wrong order ?

Jul 24, 2014 | Motorcycles

1 Answer

Im not getting any spark, what are some ways to troubleshoot spark on my ZX9


Hi, Jerome and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting, leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or CDI or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.kawasakimotorcycle.org/forum/kawasaki-streetbikes-sportbikes/49265-zx9r-no-spark.html
How to diagnose no spark situation on motorcycle
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Mar 17, 2017 | 2000 kawasaki ZX-9 R Ninja

1 Answer

Spark plug gap for 750 1994 ninja?????


Recall mine - zx7r 1996 was 0.9 to 1.1 mm. My Ninja ran very very nicely on the irridium or splitfires too. (Found that on hot days after running a while - turned off then trying to fire up after only minutes it really didnt wanna start. grrrrrr. Better plugs sorted this but I do appreciate some find these splitfires / irridum etc a bit of a gimmick. I found them bob on tbh.

Apr 17, 2013 | 1994 kawasaki ZXR 750

2 Answers

Engine misses under heavy throttle use


If ur not hitting the rev limitter then it could b the gap on the spark plugs bad spark plug or wire.or high speed jets pluggin up or air filter starting to plug up or a burnt valve.

Aug 31, 2012 | kawasaki Ninja Zx7r Zx9r '94 To '04

1 Answer

Why does only 1 exhaust pipe on my ninja 250 get hot


Try unplugging one spark plug at a time and see if the engine will run on just left and just right cylinder. The cylinder thatwont run may have a clogged carburator or the valves may be too tight causing a low/no compression on that cyliner. Also a vacuum leak at an intake boot would cause a lean condition and a hot cylinder. Be certain you have spark at both ( properly gapped) spark plugs before **** these tests.

Oct 28, 2011 | 1989 kawasaki GPX 250 R

1 Answer

Spark plug spacing? 88 ninja 600r


Spark plug gap is 0.6 to 0.7mm on your model

May 06, 2011 | kawasaki ZX-6R Ninja Motorcycles

1 Answer

1999 kawzx6e will not start. new battery and spark plugs. bike makes a buzzing sound when trying to start it.


ok man 1st check these out,

check your fuel line, carbs, choke, high tension sparks, and air filters. Make sure u dnt flood the bore with piston by giving has while starting. It will make the plug to leak or even stop its function for a while. And set the correct plug gap. Check wether a spark cud be seen when the wire is kept a mm away from da plug and try starting. dat shud do it. otherwise tell me.

Dec 14, 2009 | 1999 kawasaki ZX-6R Ninja

2 Answers

What kind of plug use to ninja 250 r


Consult the owners manual if available for your model yer if possible, but NGK CR7HS sounds about right, I do not suggest getting motorcycle parts at an autoparts store, This is one time where one should always go to the dealer. Don't know where you are located, if its unusually warm or cold weather the dealer might suggest a slightly colder or hotter heat range on the spark plug. Always gap and torque your plugs to facotry specs!
My personal experience is the NGK plugs work best in Kawasaki motorcycles. Tried others and always go back.

Jul 23, 2009 | 2008 kawasaki Ninja 250R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...