Question about Harley Davidson Motorcycles
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Shaking and vibration is normal for most Harleys, it's caused by the angle of the twins, it's normal for mostly all Harley motorcycles.
Posted on Aug 11, 2009
no they wont due to the diffrence in the end of the pipe. 95 and earlier have a flanged end where 96 and later do not have that flange. if you cut the flange off then they will fit.
Posted on Nov 02, 2009
You could have the dealership install the 103 CI kit if you like but no it didnt come from the factory with that engine in it already, only the CVO bikes such as the FLHRSE and FLHRSEI came with the 103 CI motor installed from the factory.
Posted on May 20, 2010
SOURCE: I have a 2006 road
No it won't hurt anything as long as your pipes are long enough. If they're way too short, you'll burn your exhaust valves up. As long as the pipes reach at least the front of the rear wheel, you should be fine running it straight piped. It'll make her sound good too. You'll be pleased with the sound change
Posted on Jul 09, 2011
SOURCE: 2009 triumph rocket 3 classic
not sure here as never changed them i just fit a set of pipes from motor auto factor then remove them for the annual inspection which i would advise you to do but you have to be carefull here as the police will pull you up and do a roadside check if the bike sounds too noisy then they will impound the bike till a fine is paid and then it can only be released to a authorised dealer for repair ,but this is spain plus the tow truck charges on top of the fine .I bought two pipes for my 1981 kawasaki 750 for 100 euros each and welded them on but the pipes were italian made and came with a certificate of homoglonation to present when i take the bike for its annual inspection ,and from what i remember they were welded on the other end as well as i had to cut a bit off so they fitted the wider down pipe of my bike.You have to be so carefull nowdays in any country as they are politically correct and noise polution is something a local traffic cop can make his quota of nicks up to keep the boss happy .
Posted on Sep 07, 2011
Tips for a great answer:
Aug 18, 2013 | 2003 Harley Davidson FLHRCI Road King...
Jun 23, 2012 | 2005 Harley Davidson FLHRS - FLHRSI Road...
May 07, 2012 | Harley Davidson Motorcycles
Aug 03, 2011 | 2005 Harley Davidson FLHRS - FLHRSI Road...
Jul 09, 2011 | Harley Davidson FLHRCI Road King Classic...
Jan 15, 2011 | 2006 Harley Davidson FLHRI Road King
Apr 11, 2010 | 2005 Harley Davidson FLHR - FLHRI Road...
Nov 28, 2009 | 2005 Harley Davidson FLHRS - FLHRSI Road...
Nov 20, 2008 | 2003 Harley Davidson FLHRCI Road King...
48 people viewed this question
Usually answered in minutes!