Question about Motorcycles
When i push my electric start it make no sound and will not start the bike. im having to bump start it every time
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: aprilia rs 125 starting problem
First check the battery to see its still fully charged. If it is do a voltage drop test between the battery and the starter to check for a bad relay or open circuit. If that checks out, you very likely have a bad starter/solenoid. I can explain how to do these tests if u need me to
Posted on Nov 26, 2008
SOURCE: 2006 Aprilia RS125 doesnt start
Hi .... Try switching the petrol off just prior to stopping the engine and start up again with the petrol OFF. There's enough petrol in the carb to start the bike. A good battery should show over 12 volts. Take the plugs out and give them a good clean or replace them. Is there a petrul pump fitted ? A two stroke needs to be ridden quite hard to maintain efficeincy, higher revs etc ........ let us know how you get on ?
Posted on Dec 21, 2008
SOURCE: electric start dont work
You probably have a bad switch
First look to se if there are any fuses
also see if horn works
FIX for determining if starter works
to find out take jumper cables and put the red cable on the plus side of the battery and the black on the minus side of battery(ground)
Put the black lead(ground ) on the frame of the bike near starter and touch the red to the starter lead( you may have to peel back rubber boot over starter nut
when you touch the starter nut it will spark and should spin over
if it does then you need to remove the screw assembly that holds the starter button and remove and clean it out with electronic cleaner (you may have to replace it if so go to honda shop and order new one
Posted on Jan 07, 2009
SOURCE: Bike won't rev up
i have had a lot of experience in this bike, the parts are really hard to get hold of from experience. this did happen to me but mine had a 65 bore kit on it and it turned out to be the bearings. there is not much that can stop a two-stroke bike reving up like that as the mechanics inside are very straight forward. a good tell tale is to check the inside of your sump plug, if there are filings on it as it is magnetic, this is more than probably the bearings and will need rebuilding. really sorry if this is nto the answer you are looking for.
Posted on Feb 26, 2009
Check that the clutch is in, kick stand up, and neutral light ablaze. Then try your start button. When you had it running and hit the button, the starter engaged at a slower speed then the bike engine was turning, which led to the stall. The stall means your starter works. If the starter works when the engine is running then it is wiring. Check your kick stand wiring along with the clutch wires which plug in on the handlle bar or where the clutch cable enters the engine.
Posted on Oct 23, 2009
Tips for a great answer:
Jun 27, 2014 | 2005 Aprilia Mojito Custom 125
Jun 20, 2014 | 2002 Aprilia RSV Mille
Mar 25, 2014 | 2000 Aprilia RS 125
Jan 03, 2014 | 2002 Aprilia RS 125
Oct 21, 2013 | LeoVince LEO VINCE LINK PIPE CAT...
Mar 07, 2011 | 2007 Aprilia RS 125
Jul 07, 2009 | 2006 Aprilia RS 125
Nov 17, 2008 | 2006 Aprilia RS 125
Nov 10, 2008 | 1999 Aprilia RS 125 Extrema
63 people viewed this question
Usually answered in minutes!